SS30V-R200132 Common Mode Choke Equivalent & Substitute Parts

Part Overview

The SS30V-R200132 is a 13.2 mH common mode choke manufactured by KEMET, designed for power line filtering applications. This through-hole mounted component operates at 2A maximum current with 210 mOhm DC resistance and is rated for 250V AC operation across a temperature range of -25°C to 120°C. The part is Active status and ROHS3 compliant. Substitute parts are identified when equivalent electrical performance and mechanical compatibility are required for design flexibility, inventory management, or component availability.

Substiute Parts

SS30V-R200132

KEMETIn Stock: 1181SS30V-R200132 Datasheet

Current PartRFQ

SS24V-R20045-CH

KEMETIn Stock: 846SS24V-R20045-CH Datasheet

Parametric EquivalentRFQ

SS28V-K20115-CH

KEMETIn Stock: 2602SS28V-K20115-CH Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the SS30V-R200132 are qualified based on the following criteria:

Mandatory Matching Parameters:

• Manufacturer: KEMET
• Series: SS
• Filter Type: Power Line
• Number of Lines: 2
• Current Rating (Max): 2A
• Voltage Rating - AC: 250V
• Operating Temperature Range: -25°C ~ 120°C
• Mounting Type: Through Hole
• Package / Case: Vertical, 4 PC Pin
• RoHS Status: ROHS3 Compliant
• Product Status: Active

Variable Parameters (Allowed Substitution Range):

• Inductance @ 1 kHz: 4.5 mH to 13.2 mH
• DC Resistance (Max): 170 mOhm to 220 mOhm

The SS24V-R20045-CH and SS28V-K20115-CH meet all mandatory parameters while operating within the allowed inductance and DC resistance ranges for common mode choke applications in power line filtering.

Parameter Comparison

Engineering Selection Recommendations

SS30V-R200132 (Primary Selection) Select this part when 13.2 mH inductance is required for the power line filtering application. All components are Active status with ROHS3 compliance and REACH unaffected designation.

SS28V-K20115-CH (Closest Inductance Match) This substitute provides 11.5 mH inductance, representing a 12.9% reduction from the main part. DC resistance is 220 mOhm, 4.8% higher than the main part. Mechanical dimensions are comparable (30.00mm x 22.00mm length and width). Product status is Active with identical compliance certifications.

SS24V-R20045-CH (Lower Inductance Alternative) This substitute provides 4.5 mH inductance, representing a 65.9% reduction from the main part. DC resistance is 170 mOhm, 19.0% lower than the main part. Mechanical dimensions are smaller (26.00mm x 19.00mm length and width). Product status is Active with identical compliance certifications. This option is suitable for applications requiring reduced inductance filtering characteristics.

All substitute parts maintain identical current rating (2A), voltage rating (250V AC), operating temperature range (-25°C to 120°C), and mounting configuration (Through Hole, Vertical 4 PC Pin).

Frequently Asked Questions (FAQ)

Q: Can SS24V-R20045-CH be used as a direct replacement for SS30V-R200132?

A: SS24V-R20045-CH is a parametric equivalent within the allowed substitution range. However, it provides 4.5 mH inductance compared to 13.2 mH in the main part. Selection depends on whether the application circuit design accommodates the lower inductance value. All electrical ratings and mechanical mounting are compatible.

Q: What is the difference in DC resistance between the substitute parts?

A: SS24V-R20045-CH has 170 mOhm maximum DC resistance, SS30V-R200132 has 210 mOhm, and SS28V-K20115-CH has 220 mOhm. These differences affect power dissipation and thermal performance in the circuit. Lower DC resistance reduces heat generation at rated current.

Q: Are the substitute parts physically interchangeable on the PCB?

A: All parts use identical Through Hole mounting with Vertical 4 PC Pin configuration. However, physical dimensions vary: SS24V-R20045-CH is smaller (26.00mm x 19.00mm), SS30V-R200132 is 31.00mm x 22.50mm, and SS28V-K20115-CH is 30.00mm x 22.00mm. PCB layout must accommodate the selected part's footprint.

Q: Do all substitute parts meet the same compliance requirements?

A: Yes. All parts are ROHS3 compliant, REACH unaffected, and carry EAR99 ECCN classification. All are Active status products from KEMET.

Q: Which substitute part has the closest inductance to the main part?

A: SS28V-K20115-CH provides 11.5 mH inductance, the closest match to the main part's 13.2 mH specification, with only 12.9% variance.

Q: Can temperature operating range affect part selection?

A: All parts operate across identical temperature range (-25°C to 120°C). Temperature performance is equivalent across all options.