SS2P2LHM3/84A Equivalent & Substitute Parts

Part Overview

The SS2P2LHM3/84A is a Schottky rectifier diode manufactured by Vishay General Semiconductor - Diodes Division, classified within the Diodes, Rectifiers category. This surface mount component operates at 20V DC reverse voltage with a 2A average rectified current rating and is housed in a DO-220AA (SMP) package. The device is actively produced and carries automotive-grade qualification under AEC-Q101 standards. Substitute parts are identified when equivalent electrical performance and mechanical compatibility are required due to inventory constraints, supply chain considerations, or packaging format preferences while maintaining identical functional specifications.

Substiute Parts

SS2P2LHM3/84A

Vishay General Semiconductor - Diodes DivisionIn Stock: 9240SS2P2LHM3/84A Datasheet

Current PartRFQ

SS2P2L-M3/84A

Vishay General Semiconductor - Diodes DivisionIn Stock: 30175SS2P2L-M3/84A Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the SS2P2LHM3/84A is determined by strict equivalence across the following critical parameters:

Electrical Specifications:

• Voltage - DC Reverse (Vr) (Max): 20 V
• Current - Average Rectified (Io): 2 A
• Voltage - Forward (Vf) (Max) @ If: 500 mV @ 2 A
• Speed: Fast Recovery ≤ 500ns, > 200mA (Io)
• Current - Reverse Leakage @ Vr: 200 µA @ 20 V
• Capacitance @ Vr, F: 130 pF @ 4V, 1MHz
• Operating Temperature - Junction: -55°C to 150°C

Mechanical & Package Specifications:

• Package / Case: DO-220AA
• Mounting Type: Surface Mount
• Technology: Schottky

Compliance & Quality:

• RoHS Status: ROHS3 Compliant
• Moisture Sensitivity Level (MSL): 1 (Unlimited)
• REACH Status: REACH Unaffected

Substitute parts must match all electrical parameters, maintain identical package geometry and mounting characteristics, and satisfy the same compliance requirements. Packaging format variations (Tape & Reel versus Cut Tape) do not affect electrical or mechanical compatibility and are considered interchangeable for component selection purposes.

Parameter Comparison

Engineering Selection Recommendations

Both the SS2P2LHM3/84A and SS2P2L-M3/84A are active production components manufactured by Vishay General Semiconductor - Diodes Division and carry identical electrical and mechanical specifications. Selection between these parts is based on packaging format availability and supply chain requirements rather than functional differences.

SS2P2LHM3/84A is supplied in Tape & Reel (TR) format with 9,200 pieces in current inventory.

SS2P2L-M3/84A is supplied in Cut Tape (CT) format with 30,100 pieces in current inventory.

Both components satisfy ROHS3 compliance, REACH unaffected status, and automotive-grade AEC-Q101 qualification. The identical base product number (SS2P2), series designation (eSMP®), and all electrical parameters confirm full functional interchangeability. Selection should be determined by assembly process requirements, tape format compatibility with pick-and-place equipment, and inventory availability at the time of procurement.

Frequently Asked Questions (FAQ)

Q: Are SS2P2LHM3/84A and SS2P2L-M3/84A electrically identical?

A: Yes. Both components share identical electrical specifications including 20V reverse voltage rating, 2A average rectified current, 500mV forward voltage drop at 2A, fast recovery switching characteristics, and identical reverse leakage and capacitance parameters across the full operating temperature range of -55°C to 150°C.

Q: What is the difference between these two part numbers?

A: The primary difference is packaging format. SS2P2LHM3/84A is supplied in Tape & Reel (TR) format, while SS2P2L-M3/84A is supplied in Cut Tape (CT) format. Both use identical DO-220AA surface mount packages with the same mechanical footprint and pin configuration.

Q: Can I substitute SS2P2L-M3/84A for SS2P2LHM3/84A in my design?

A: Yes. The components are mechanically and electrically equivalent. Substitution is valid provided your assembly process can accommodate the Cut Tape packaging format. Verify that your pick-and-place equipment supports the tape configuration of the substitute part.

Q: Do these parts have the same compliance certifications?

A: Yes. Both components are ROHS3 compliant, REACH unaffected, and carry AEC-Q101 automotive-grade qualification. Moisture sensitivity level is identical at MSL 1 (Unlimited) for both parts.

Q: Which part should I select for new designs?

A: Selection should be based on assembly process compatibility and current inventory availability. Both parts are active production items from the same manufacturer with identical performance characteristics. Consult your procurement department regarding tape format compatibility with your manufacturing equipment and lead time requirements.

Q: Are there any temperature or voltage derating considerations between these parts?

A: No. Both components operate identically across the full junction temperature range of -55°C to 150°C and maintain the same voltage and current ratings throughout this range.