SS2H10HM3_A/I Equivalent & Substitute Parts

Part Overview

The SS2H10HM3_A/I is an active Schottky rectifier diode manufactured by Vishay General Semiconductor - Diodes Division. This surface mount component operates at 100 V DC reverse voltage with a 2 A average rectified current rating and is packaged in the DO-214AA (SMB) form factor. The device is qualified to AEC-Q101 automotive standards and complies with ROHS3 and REACH regulations.

Substitute parts are identified when design requirements necessitate alternative packaging formats, different supplier sourcing, or inventory availability considerations while maintaining electrical and mechanical compatibility within the specified parameter ranges.

Key Parameters

Parameter	Value	Unit
Technology	Schottky	—
Voltage - DC Reverse (Vr) (Max)	100	V
Current - Average Rectified (Io)	2	A
Voltage - Forward (Vf) (Max) @ If	790	mV @ 2 A
Speed	Fast Recovery ≤ 500ns, > 200mA (Io)	—
Current - Reverse Leakage @ Vr	10	µA @ 100 V
Package / Case	DO-214AA, SMB	—
Mounting Type	Surface Mount	—
Operating Temperature - Junction	-65 to 175	°C
Grade	Automotive	—
Qualification	AEC-Q101	—
RoHS Status	ROHS3 Compliant	—
Moisture Sensitivity Level (MSL)	1 (Unlimited)	—

Substitute Part Grouping Explanation

Substitute parts for the SS2H10HM3_A/I are classified based on electrical parameter equivalence and mechanical compatibility. The primary substitution criteria are:

Electrical Parameters (Must Match):

Voltage - DC Reverse (Vr) (Max): 100 V
Current - Average Rectified (Io): 2 A
Technology: Schottky
Speed: Fast Recovery ≤ 500ns, > 200mA (Io)
Package / Case: DO-214AA, SMB
Mounting Type: Surface Mount

Allowable Variations:

Voltage - Forward (Vf) (Max) @ If: 790 mV ± tolerance (up to 800 mV acceptable)
Current - Reverse Leakage @ Vr: 10 µA baseline (up to 50 µA acceptable for similar-grade devices)
Packaging Format: Tape & Reel (TR), Cut Tape (CT), or Digi-Reel® formats are interchangeable for the same electrical device
Operating Temperature - Junction: -65°C to 175°C (minimum range requirement)

Compliance Requirements:

RoHS3 Compliant
REACH Unaffected
Automotive Grade and AEC-Q101 qualification preferred for direct substitution

Parameter Comparison

Manufacturer Part Number	Manufacturer	Vr (Max) [V]	Io [A]	Vf (Max) @ If [mV]	Ir @ Vr [µA]	Package	Packaging Format	Grade	AEC-Q101	Tj Range [°C]
SS2H10HM3_A/I	Vishay General Semiconductor - Diodes Division	100	2	790 @ 2 A	10 @ 100 V	DO-214AA, SMB	Tape & Reel (TR)	Automotive	Yes	-65 to 175
SS2H10-E3/52T	Vishay General Semiconductor - Diodes Division	100	2	790 @ 2 A	10 @ 100 V	DO-214AA, SMB	Cut Tape (CT)	—	—	-65 to 175
SS2H10-E3/5BT	Vishay General Semiconductor - Diodes Division	100	2	790 @ 2 A	10 @ 100 V	DO-214AA, SMB	Cut Tape (CT)	—	—	-65 to 175
SS2H10HE3_A/H	Vishay General Semiconductor - Diodes Division	100	2	790 @ 2 A	10 @ 100 V	DO-214AA, SMB	Cut Tape (CT) & Digi-Reel®	Automotive	Yes	-65 to 175
MBRS2H100T3G	onsemi	100	2	790 @ 2 A	8 @ 100 V	DO-214AA, SMB	Cut Tape (CT) & Digi-Reel®	—	—	-65 to 175
MB210-AU_R1_000A1	Panjit International Inc.	100	2	800 @ 2 A	50 @ 100 V	DO-214AA, SMB	Tape & Reel (TR)	Automotive	Yes	-55 to 175

Engineering Selection Recommendations

Parametric Equivalents (Direct Substitution):

The parts SS2H10-E3/52T, SS2H10-E3/5BT, and SS2H10HE3_A/H are parametric equivalents manufactured by Vishay General Semiconductor - Diodes Division. These devices share identical electrical specifications with the main part SS2H10HM3_A/I. Selection among these three is determined by packaging format availability: Cut Tape (CT) for SS2H10-E3/52T and SS2H10-E3/5BT, or Cut Tape (CT) & Digi-Reel® for SS2H10HE3_A/H. The SS2H10HE3_A/H additionally carries Automotive Grade and AEC-Q101 qualification, matching the main part's compliance profile.

Cross-Manufacturer Parametric Equivalent:

The MBRS2H100T3G manufactured by onsemi meets all electrical parameter requirements with identical voltage, current, and forward voltage specifications. The reverse leakage current is 8 µA, which is lower than the 10 µA specification of the main part, representing improved performance. Operating temperature range matches at -65°C to 175°C. This device is available in Cut Tape (CT) & Digi-Reel® packaging.

Similar Substitute (Parameter Variation):

The MB210-AU_R1_000A1 manufactured by Panjit International Inc. is classified as a similar substitute due to allowable parameter variations. Forward voltage is specified at 800 mV (versus 790 mV), and reverse leakage current is 50 µA (versus 10 µA). The operating temperature minimum is -55°C (versus -65°C). This device carries Automotive Grade and AEC-Q101 qualification and is available in Tape & Reel (TR) packaging. Selection of this part is appropriate when the parameter variations are acceptable for the application and when Panjit sourcing is preferred.

All substitute parts maintain ROHS3 compliance and REACH unaffected status.

Frequently Asked Questions (FAQ)

Q: Can SS2H10-E3/52T and SS2H10-E3/5BT be used interchangeably with SS2H10HM3_A/I?

A: Yes. Both parts are parametric equivalents with identical electrical specifications. The difference is packaging format: SS2H10HM3_A/I is supplied in Tape & Reel (TR), while SS2H10-E3/52T and SS2H10-E3/5BT are supplied in Cut Tape (CT). The electrical performance and DO-214AA (SMB) package are identical. Note that SS2H10-E3/52T and SS2H10-E3/5BT do not carry explicit Automotive Grade or AEC-Q101 designation in the provided specifications.

Q: What is the difference between SS2H10HE3_A/H and SS2H10HM3_A/I?

A: Both parts are manufactured by Vishay and share identical electrical parameters: 100 V reverse voltage, 2 A current rating, 790 mV forward voltage, and -65°C to 175°C operating range. Both carry Automotive Grade and AEC-Q101 qualification. The primary difference is packaging format: SS2H10HM3_A/I is Tape & Reel (TR), while SS2H10HE3_A/H is Cut Tape (CT) & Digi-Reel®. Selection depends on assembly line requirements.

Q: Is MBRS2H100T3G a direct replacement for SS2H10HM3_A/I?

A: MBRS2H100T3G is a parametric equivalent from onsemi with matching voltage, current, and forward voltage specifications. The reverse leakage current is 8 µA (lower than the 10 µA specification), which represents improved performance. Operating temperature range is identical at -65°C to 175°C. This part is suitable for direct substitution from an electrical standpoint. Packaging is Cut Tape (CT) & Digi-Reel®.

Q: Can MB210-AU_R1_000A1 replace SS2H10HM3_A/I?

A: MB210-AU_R1_000A1 from Panjit is a similar substitute with allowable parameter variations. Forward voltage is 800 mV (10 mV higher than 790 mV), reverse leakage is 50 µA (40 µA higher than 10 µA), and minimum operating temperature is -55°C (10°C higher than -65°C). These variations are within acceptable ranges for many applications. The part carries Automotive Grade and AEC-Q101 qualification. Substitution is appropriate when these parameter variations are acceptable for the specific circuit design.

Q: What does packaging format mean, and does it affect electrical performance?

A: Packaging format refers to how components are supplied: Tape & Reel (TR) is a continuous reel format for high-volume automated assembly, Cut Tape (CT) is tape cut into smaller sections, and Digi-Reel® is a proprietary format. These formats do not affect electrical performance; they are logistics and assembly considerations. The actual component package (DO-214AA, SMB) remains identical across all formats.

Q: Are all substitute parts RoHS3 compliant?

A: Yes. All parts listed—SS2H10-E3/52T, SS2H10-E3/5BT, SS2H10HE3_A/H, MBRS2H100T3G, and MB210-AU_R1_000A1—are ROHS3 compliant and REACH unaffected.

Q: Which substitute part has the lowest reverse leakage current?

A: MBRS2H100T3G has the lowest reverse leakage current at 8 µA @ 100 V, compared to 10 µA for the main part and Vishay equivalents, and 50 µA for the Panjit part.

Q: Do all substitute parts have AEC-Q101 qualification?

A: No. SS2H10HE3_A/H and MB210-AU_R1_000A1 carry explicit AEC-Q101 qualification. SS2H10-E3/52T and SS2H10-E3/5BT do not list this qualification in the provided specifications. MBRS2H100T3G does not list AEC-Q101 qualification. For automotive applications requiring AEC-Q101 certification, SS2H10HE3_A/H or MB210-AU_R1_000A1 are preferred.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message