SS2FH10HM3/I Equivalent & Substitute Parts

Part Overview

The SS2FH10HM3/I is a Schottky rectifier diode manufactured by Vishay General Semiconductor - Diodes Division, classified within the eSMP® series. This surface mount component operates at 100V reverse voltage with a 2A average rectified current rating and is packaged in DO-219AB (SMF) format on Tape & Reel (TR) carrier. The device is actively produced and maintains Automotive grade qualification under AEC-Q101 standards with full ROHS3 compliance.

Equivalent and substitute parts are identified to address supply chain requirements, packaging format preferences, and inventory availability while maintaining identical electrical performance and mechanical compatibility within the DO-219AB package specification.

Substiute Parts

SS2FH10HM3/I

Vishay General Semiconductor - Diodes DivisionIn Stock: 989SS2FH10HM3/I Datasheet

Current PartRFQ

SS2FH10-M3/H

Vishay General Semiconductor - Diodes DivisionIn Stock: 14615SS2FH10-M3/H Datasheet

Parametric EquivalentRFQ

SS2FH10HM3/H

Vishay General Semiconductor - Diodes DivisionIn Stock: 21293SS2FH10HM3/H Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the SS2FH10HM3/I is determined by strict equivalence across the following electrical and mechanical parameters:

Critical Substitution Parameters:

• Voltage - DC Reverse (Vr) (Max): 100 V
• Current - Average Rectified (Io): 2 A
• Voltage - Forward (Vf) (Max) @ If: 860 mV @ 2 A
• Speed: Fast Recovery ≤ 500ns, > 200mA (Io)
• Current - Reverse Leakage @ Vr: 5 µA @ 100 V
• Capacitance @ Vr, F: 70 pF @ 4V, 1MHz
• Package / Case: DO-219AB
• Operating Temperature - Junction: -55°C to 175°C
• Technology: Schottky
• RoHS Status: ROHS3 Compliant
• Moisture Sensitivity Level (MSL): 1 (Unlimited)

Substitute parts maintain identical electrical performance and mechanical compatibility. Differences in packaging format (Tape & Reel versus Cut Tape & Digi-Reel®) and inventory levels do not affect functional equivalence. All substitute parts share the same base product number SS2FH10 and are manufactured by the same supplier.

Parameter Comparison

Engineering Selection Recommendations

SS2FH10HM3/H provides direct equivalence to the SS2FH10HM3/I with identical electrical specifications, automotive grade qualification, and AEC-Q101 certification. Both parts are supplied on Tape & Reel (TR) carrier and maintain the same reverse leakage specification at 100V. This substitute is appropriate for applications requiring automotive-grade components with full traceability and qualification documentation.

SS2FH10-M3/H offers electrical equivalence across all primary performance parameters within the DO-219AB package. This part is supplied on Cut Tape (CT) & Digi-Reel® carrier, providing an alternative packaging format. The reverse leakage specification is measured at 10V rather than 100V. This substitute is suitable for applications where packaging format flexibility is acceptable and automotive-grade qualification is not a requirement.

All three parts maintain ROHS3 compliance, unlimited moisture sensitivity level (MSL 1), and active product status. Selection between these equivalents should be based on specific packaging requirements, supply chain preferences, and whether automotive-grade qualification with AEC-Q101 certification is mandated by application specifications.

Frequently Asked Questions (FAQ)

Q: Can SS2FH10-M3/H be used in place of SS2FH10HM3/I in automotive applications?

A: SS2FH10-M3/H maintains electrical equivalence across all primary performance parameters. However, it does not carry automotive grade designation or AEC-Q101 qualification. Use in automotive applications requires verification that your specific application does not mandate automotive-grade components or AEC-Q101 certification.

Q: What is the difference between Tape & Reel (TR) and Cut Tape (CT) & Digi-Reel® packaging?

A: Tape & Reel (TR) is a continuous reel format suitable for high-volume automated assembly. Cut Tape (CT) & Digi-Reel® provides flexibility for lower-volume or mixed-component assembly operations. Both formats contain identical components in the DO-219AB package. Selection depends on assembly equipment compatibility and order quantity requirements.

Q: Are all three parts electrically interchangeable?

A: SS2FH10HM3/I and SS2FH10HM3/H are fully electrically interchangeable with identical specifications across all measured parameters. SS2FH10-M3/H is electrically equivalent for primary performance parameters (voltage, current, forward voltage, speed, and capacitance). The reverse leakage specification is measured at different voltage levels (10V versus 100V), which does not affect functional equivalence in typical circuit applications.

Q: What does ROHS3 compliance mean?

A: ROHS3 compliance indicates the component meets the Restriction of Hazardous Substances Directive requirements, restricting the use of specific hazardous materials in electrical and electronic equipment. All three substitute parts maintain ROHS3 compliance.

Q: What is MSL 1 (Unlimited) moisture sensitivity?

A: Moisture Sensitivity Level 1 (Unlimited) indicates the component has minimal sensitivity to moisture absorption during storage and handling. No special moisture control measures or baking procedures are required prior to soldering. All three parts share this specification.

Q: Does the difference in reverse leakage measurement voltage affect circuit performance?

A: The reverse leakage specification for SS2FH10-M3/H is measured at 10V while SS2FH10HM3/I and SS2FH10HM3/H are measured at 100V. Both specifications indicate 5 µA leakage current. In typical circuit applications operating at or near the rated 100V reverse voltage, this difference in measurement conditions does not result in functional performance variation.