SS26V-R200102 Equivalent & Substitute Parts

Part Overview

The SS26V-R200102 is a 2-line common mode choke (CMC) manufactured by KEMET, designed for power line filtering applications. This through-hole component operates at 10.2 mH inductance at 1 kHz with a maximum current rating of 2A and DC resistance of 250 mOhm. The part is Active in product status and complies with RoHS3 and REACH regulations. Substitute parts are identified when equivalent electrical performance and mechanical compatibility are required for design flexibility, inventory management, or component availability.

Substiute Parts

SS26V-R200102

KEMETIn Stock: 686SS26V-R200102 Datasheet

Current PartRFQ

SS28V-20075-CH

KEMETIn Stock: 1130SS28V-20075-CH Datasheet

Parametric EquivalentRFQ

SS28V-K20115-CH

KEMETIn Stock: 2602SS28V-K20115-CH Datasheet

Parametric EquivalentRFQ

SS30V-R200132

KEMETIn Stock: 1181SS30V-R200132 Datasheet

Parametric EquivalentRFQ

SS35H-20170

KEMETIn Stock: 1334SS35H-20170 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the SS26V-R200102 are qualified based on the following critical parameters that determine functional equivalence:

Mandatory Matching Parameters:

• Number of Lines: 2
• Mounting Type: Through Hole
• Package / Case: Vertical, 4 PC Pin
• Voltage Rating - AC: 250V
• Operating Temperature Range: -25°C ~ 120°C
• Current Rating (Max): 2A
• Filter Type: Power Line
• Series: SS (KEMET)
• RoHS Status: ROHS3 Compliant

Variable Parameters (Allowed to Differ):

• Inductance @ Frequency: 7.5 mH to 17 mH @ 1 kHz
• DC Resistance (DCR) (Max): 210 mOhm to 280 mOhm
• Physical Dimensions: Varies by inductance value

The SS26V-R200102 operates at 10.2 mH inductance. Substitute parts with inductance values ranging from 7.5 mH to 17 mH are functionally equivalent when the application circuit design accommodates the inductance variation. All substitute parts maintain identical electrical ratings, compliance certifications, and mechanical mounting compatibility.

Parameter Comparison

Engineering Selection Recommendations

All substitute parts listed are Active products manufactured by KEMET within the SS series and maintain full compliance with RoHS3 and REACH regulations. Selection between the SS26V-R200102 and its substitutes is determined by the required inductance value for the specific power line filtering application.

Inductance Selection Guidance:

• SS28V-20075-CH (7.5 mH): Lower inductance value suitable for applications requiring reduced filtering impedance or higher frequency response.

• SS28V-K20115-CH (11.5 mH): Closest inductance match to the primary part, offering minimal circuit redesign requirements.

• SS30V-R200132 (13.2 mH): Moderate inductance increase for enhanced common mode noise attenuation.

• SS35H-20170 (17 mH): Highest inductance value providing maximum filtering performance for demanding power line applications.

All substitute parts maintain identical current ratings (2A), voltage ratings (250V AC), operating temperature ranges (-25°C to 120°C), and mounting configurations (through-hole, vertical 4-pin). DC resistance values vary between 210 mOhm and 280 mOhm across the substitute range, with lower values reducing power dissipation and higher values acceptable within standard thermal design margins.

Frequently Asked Questions (FAQ)

Q: Can the SS28V-20075-CH replace the SS26V-R200102 in my circuit?

A: The SS28V-20075-CH is mechanically and electrically compatible with identical current, voltage, and temperature ratings. However, the inductance is 7.5 mH compared to 10.2 mH in the primary part. Substitution is valid only if the circuit design accommodates the lower inductance value. Circuit simulation or testing is required to confirm performance in your specific application.

Q: What is the difference between the SS28V-K20115-CH and SS30V-R200132?

A: Both parts are functionally equivalent substitutes with identical electrical ratings and mounting specifications. The SS28V-K20115-CH operates at 11.5 mH inductance with 220 mOhm DC resistance, while the SS30V-R200132 operates at 13.2 mH inductance with 210 mOhm DC resistance. The SS30V-R200132 provides higher inductance and lower DC resistance, resulting in improved filtering performance and reduced power dissipation.

Q: Are all substitute parts RoHS3 compliant?

A: Yes. All substitute parts listed (SS28V-20075-CH, SS28V-K20115-CH, SS30V-R200132, and SS35H-20170) are ROHS3 Compliant and REACH Unaffected, matching the compliance status of the primary SS26V-R200102 part.

Q: Do the substitute parts fit the same PCB footprint as the SS26V-R200102?

A: All substitute parts use identical through-hole mounting with vertical 4-pin package configuration. However, physical dimensions vary with inductance value. The SS26V-R200102 measures 26.00 mm L × 20.50 mm W × 30.50 mm H. Larger inductance values (SS35H-20170) require increased board space at 37.00 mm L × 35.00 mm W × 30.00 mm H. PCB layout verification is required before substitution.

Q: What is the maximum current rating for all substitute parts?

A: All substitute parts, including the primary SS26V-R200102, are rated for a maximum continuous current of 2A. This parameter is constant across all equivalent and substitute parts.

Q: Can I use the SS35H-20170 if I need maximum filtering performance?

A: The SS35H-20170 provides the highest inductance at 17 mH, delivering maximum common mode noise attenuation. This part maintains all electrical ratings (2A current, 250V AC voltage, -25°C to 120°C operating temperature) and compliance certifications. Physical dimensions are larger, requiring verification of available PCB space before implementation.