SS21V-R300013 Equivalent & Substitute Parts

Part Overview

The SS21V-R300013 is a Common Mode Choke (CMC) manufactured by KEMET, designed for power line filtering applications. This through-hole component features a 1.3 mH inductance at 1 kHz, rated for 3A maximum current, with a DC resistance of 70 mOhm. The part operates across a temperature range of -25°C to 120°C and is rated for 250V AC. The SS21V-R300013 maintains Active product status and is ROHS3 compliant. Equivalent and substitute parts are identified to support component availability, inventory management, and design flexibility while maintaining electrical and mechanical compatibility within specified parameters.

Substiute Parts

SS21V-R300013

KEMETIn Stock: 1602SS21V-R300013 Datasheet

Current PartRFQ

SS11VL-30006

KEMETIn Stock: 1167SS11VL-30006 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the SS21V-R300013 is determined by the following critical parameters:

Mandatory Matching Parameters:

• Manufacturer: KEMET
• Series: SS
• Filter Type: Power Line
• Number of Lines: 2
• Current Rating (Max): 3A
• Voltage Rating - AC: 250V
• Operating Temperature Range: -25°C ~ 120°C
• Mounting Type: Through Hole
• Package / Case: Vertical, 4 PC Pin
• RoHS Status: ROHS3 Compliant

Variable Parameters (Allowable Differences):

• Inductance @ Frequency: Different inductance values are acceptable based on application requirements
• DC Resistance (DCR) (Max): Variation within acceptable limits for the product category
• Physical Dimensions: Variation within through-hole mounting constraints

The SS11VL-30006 qualifies as a parametric equivalent because it maintains all mandatory matching parameters while offering a different inductance value (600 µH @ 1 kHz) and lower DC resistance (60 mOhm), providing alternative filtering characteristics within the same electrical and mechanical framework.

Parameter Comparison

Engineering Selection Recommendations

Both the SS21V-R300013 and SS11VL-30006 are Active products manufactured by KEMET and maintain ROHS3 compliance. Selection between these parts is based on inductance requirements specific to the application circuit.

The SS21V-R300013 provides 1.3 mH inductance at 1 kHz with 70 mOhm DCR and is suitable for applications requiring higher inductance filtering characteristics.

The SS11VL-30006 provides 600 µH inductance at 1 kHz with 60 mOhm DCR and is suitable for applications requiring lower inductance filtering characteristics with reduced DC resistance.

Both parts share identical current ratings (3A), voltage ratings (250V AC), operating temperature ranges (-25°C to 120°C), mounting configurations (through-hole, vertical 4-pin), and compliance certifications. Physical dimensions differ; the SS11VL-30006 is slightly taller in length and width but shorter in height compared to the SS21V-R300013. PCB layout and available mounting space must accommodate the selected part's dimensions.

Frequently Asked Questions (FAQ)

Q: Can the SS11VL-30006 be used as a direct replacement for the SS21V-R300013?

A: The SS11VL-30006 is a parametric equivalent, not a direct pin-for-pin replacement. Both parts share identical electrical ratings (3A, 250V AC), mounting type (through-hole), and package configuration (vertical, 4-pin). However, the inductance values differ (1.3 mH versus 600 µH). Substitution is valid only if the circuit design accommodates the lower inductance value of the SS11VL-30006. Physical dimensions also differ; verify PCB layout compatibility before substitution.

Q: What are the key differences between these two parts?

A: The primary differences are inductance and DC resistance. The SS21V-R300013 offers 1.3 mH inductance with 70 mOhm DCR, while the SS11VL-30006 offers 600 µH inductance with 60 mOhm DCR. Physical dimensions vary: the SS21V-R300013 measures 20.50mm L x 16.50mm W x 24.50mm H, and the SS11VL-30006 measures 22.00mm L x 14.50mm W x 19.50mm H. All other electrical and mechanical parameters remain identical.

Q: Are both parts suitable for the same voltage and current applications?

A: Yes. Both parts are rated for 3A maximum current and 250V AC voltage. Both operate across the same temperature range (-25°C to 120°C). The selection between them depends on the required inductance value for the specific filtering application, not on voltage or current limitations.

Q: Do these parts have the same pin configuration?

A: Yes. Both parts use a vertical, 4-pin configuration with through-hole mounting. Pin compatibility is maintained; however, physical dimensions differ, which may affect PCB layout spacing and component placement.

Q: Are both parts RoHS compliant?

A: Yes. Both the SS21V-R300013 and SS11VL-30006 are ROHS3 compliant and maintain Active product status with KEMET.