SS210LHRUG Equivalent & Substitute Parts

Part Overview

The SS210LHRUG is a Schottky rectifier diode manufactured by Taiwan Semiconductor Corporation, rated for 100 V DC reverse voltage and 2 A average rectified current in a Sub SMA surface mount package. This component is classified as Active product status with AEC-Q101 automotive qualification and ROHS3 compliance. Equivalent and substitute parts are identified based on matching electrical performance parameters, package compatibility, and operational specifications to support component procurement flexibility and supply chain continuity.

Substiute Parts

SS210LHRUG

Taiwan Semiconductor CorporationIn Stock: 1038SS210LHRUG Datasheet

Current PartRFQ

SS210L RVG

Taiwan Semiconductor CorporationIn Stock: 12523SS210L RVG Datasheet

Parametric EquivalentRFQ

SS1FH10-M3/H

Vishay General Semiconductor - Diodes DivisionIn Stock: 25151SS1FH10-M3/H Datasheet

SimilarRFQ

SS1FH10HM3/H

Vishay General Semiconductor - Diodes DivisionIn Stock: 130271SS1FH10HM3/H Datasheet

SimilarRFQ

SS2FH10-M3/H

Vishay General Semiconductor - Diodes DivisionIn Stock: 14615SS2FH10-M3/H Datasheet

SimilarRFQ

SS2FH10HM3/H

Vishay General Semiconductor - Diodes DivisionIn Stock: 21293SS2FH10HM3/H Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the SS210LHRUG are classified into two categories based on electrical and mechanical compatibility:

Parametric Equivalent (Direct Substitution): Parts that match all critical electrical parameters (100 V reverse voltage, 2 A rectified current, 850 mV forward voltage at 2 A) and package specifications (DO-219AB Sub SMA). These parts maintain identical functional performance and are interchangeable without circuit modification.

Similar Parts (Current-Reduced Alternatives): Parts that maintain the same reverse voltage rating (100 V) and package form factor (DO-219AB) but operate at reduced average rectified current (1 A instead of 2 A). These parts are suitable for applications where the full 2 A current capacity is not required. Forward voltage characteristics differ slightly (800 mV @ 1 A for 1 A rated devices versus 850 mV @ 2 A for 2 A rated devices).

Substitution eligibility is determined by:

• Voltage - DC Reverse (Vr) (Max): Must equal 100 V
• Package / Case: Must be DO-219AB
• Mounting Type: Must be Surface Mount
• Technology: Must be Schottky
• Current - Average Rectified (Io): Must meet or exceed circuit requirements

Parameter Comparison

Engineering Selection Recommendations

Direct Substitution (Parametric Equivalent):

SS210L RVG is a parametric equivalent to SS210LHRUG, offering identical electrical specifications (100 V, 2 A, 850 mV forward voltage) and package configuration. Both parts are manufactured by Taiwan Semiconductor Corporation and maintain ROHS3 compliance and MSL 1 rating. The primary difference is packaging format: SS210LHRUG is supplied in Tape & Reel (TR) while SS210L RVG is supplied in Cut Tape (CT) & Digi-Reel®. Selection between these two is determined by procurement and assembly requirements rather than electrical performance.

Automotive-Grade Alternatives:

For applications requiring automotive qualification (AEC-Q101), the following Vishay General Semiconductor parts are available:

SS1FH10HM3/H and SS2FH10HM3/H both carry AEC-Q101 qualification and automotive grade designation. SS2FH10HM3/H maintains the 2 A current rating of the main part while SS1FH10HM3/H operates at 1 A. Both extend the operating temperature range to -55°C ~ 175°C compared to the main part's -55°C ~ 150°C. These parts are supplied in Tape & Reel (TR) packaging.

Non-Automotive Alternatives:

SS1FH10-M3/H and SS2FH10-M3/H are available from Vishay General Semiconductor without automotive qualification. SS2FH10-M3/H matches the 2 A current rating while SS1FH10-M3/H operates at 1 A. These parts are supplied in Cut Tape (CT) & Digi-Reel® packaging and extend the operating temperature range to -55°C ~ 175°C.

Current Derating Considerations:

Parts rated for 1 A (SS1FH10-M3/H and SS1FH10HM3/H) are suitable only for applications where the circuit current requirement does not exceed 1 A. These parts exhibit lower forward voltage (800 mV @ 1 A) compared to 2 A rated devices. Selection of 1 A parts for 2 A applications will result in component overstress and is not permitted.

Frequently Asked Questions (FAQ)

Q: Can SS210L RVG be used as a direct replacement for SS210LHRUG?

A: Yes. SS210L RVG is a parametric equivalent with identical electrical specifications (100 V reverse voltage, 2 A average rectified current, 850 mV forward voltage at 2 A) and package form factor (DO-219AB Sub SMA). The difference is packaging format: Tape & Reel (TR) versus Cut Tape (CT) & Digi-Reel®. Selection depends on assembly line requirements.

Q: What is the difference between the 1 A and 2 A rated Vishay parts?

A: The 1 A rated parts (SS1FH10-M3/H and SS1FH10HM3/H) are designed for circuits with maximum 1 A current requirements. The 2 A rated parts (SS2FH10-M3/H and SS2FH10HM3/H) support up to 2 A operation. Forward voltage differs: 800 mV @ 1 A for 1 A devices versus 860 mV @ 2 A for 2 A devices. Using a 1 A part in a 2 A application causes component overstress.

Q: Are all substitute parts automotive qualified?

A: No. Only SS1FH10HM3/H and SS2FH10HM3/H carry AEC-Q101 automotive qualification and automotive grade designation. SS1FH10-M3/H and SS2FH10-M3/H do not include automotive qualification. SS210L RVG does not specify automotive qualification. Selection of automotive-qualified parts is required for automotive applications.

Q: What is the operating temperature difference between the main part and Vishay substitutes?

A: The main part SS210LHRUG operates from -55°C to 150°C junction temperature. All Vishay substitute parts (SS1FH10-M3/H, SS1FH10HM3/H, SS2FH10-M3/H, SS2FH10HM3/H) extend the upper limit to 175°C. This extended range provides additional thermal margin in high-temperature applications.

Q: Can I use SS210L RVG in place of SS210LHRUG for automotive applications?

A: SS210L RVG does not specify automotive grade or AEC-Q101 qualification. For automotive applications requiring these certifications, use SS2FH10HM3/H (2 A rated, AEC-Q101 qualified) or SS1FH10HM3/H (1 A rated, AEC-Q101 qualified) instead.

Q: What is the difference in reverse leakage current between parts?

A: The main part SS210LHRUG specifies 100 µA @ 100 V reverse leakage. Most Vishay substitutes specify 5 µA @ 100 V, representing lower leakage. SS2FH10-M3/H specifies 5 µA @ 10 V. Lower reverse leakage improves efficiency in low-current applications.

Q: Are all parts ROHS3 compliant?

A: Yes. All parts listed (SS210LHRUG, SS210L RVG, SS1FH10-M3/H, SS1FH10HM3/H, SS2FH10-M3/H, SS2FH10HM3/H) are ROHS3 compliant with MSL 1 (Unlimited) moisture sensitivity rating.

Q: What packaging options are available?

A: SS210LHRUG is supplied in Tape & Reel (TR). SS210L RVG is supplied in Cut Tape (CT) & Digi-Reel®. Vishay parts are supplied as follows: SS1FH10-M3/H and SS2FH10-M3/H in Cut Tape (CT) & Digi-Reel®; SS1FH10HM3/H and SS2FH10HM3/H in Tape & Reel (TR). Selection depends on assembly equipment compatibility.