SS210LHR3G Equivalent & Substitute Parts

Part Overview

The SS210LHR3G is a Schottky rectifier diode manufactured by Taiwan Semiconductor Corporation, rated for 100 V DC reverse voltage and 2 A average rectified current in a Sub SMA surface mount package. This component is classified as Active product status with AEC-Q101 automotive qualification and ROHS3 compliance. Equivalent and substitute parts are identified based on matching electrical specifications, package compatibility, and thermal operating ranges to support component procurement flexibility and supply chain continuity.

Substiute Parts

SS210LHR3G

Taiwan Semiconductor CorporationIn Stock: 1060SS210LHR3G Datasheet

Current PartRFQ

SS210L RVG

Taiwan Semiconductor CorporationIn Stock: 12523SS210L RVG Datasheet

Parametric EquivalentRFQ

SS1FH10-M3/H

Vishay General Semiconductor - Diodes DivisionIn Stock: 25151SS1FH10-M3/H Datasheet

SimilarRFQ

SS1FH10HM3/H

Vishay General Semiconductor - Diodes DivisionIn Stock: 130271SS1FH10HM3/H Datasheet

SimilarRFQ

SS2FH10-M3/H

Vishay General Semiconductor - Diodes DivisionIn Stock: 14615SS2FH10-M3/H Datasheet

SimilarRFQ

SS2FH10HM3/H

Vishay General Semiconductor - Diodes DivisionIn Stock: 21293SS2FH10HM3/H Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the SS210LHR3G are classified into two categories based on electrical parameter alignment:

Parametric Equivalent (Direct Substitution): Parts matching all critical electrical specifications including 100 V reverse voltage rating, 2 A average rectified current, 850 mV forward voltage at 2 A, and identical fast recovery speed characteristics. These parts maintain the same thermal operating range and package configuration.

Similar Parts (Current-Reduced Alternatives): Parts rated for 100 V reverse voltage with reduced current capacity (1 A instead of 2 A) or from alternative manufacturers. These parts share the same package type (DO-219AB), fast recovery speed, and operating temperature range but differ in average rectified current rating. Similar parts are suitable for applications where the full 2 A current capacity is not required.

Key Parameters Determining Substitution:

• Voltage - DC Reverse (Vr) (Max): 100 V (required match)
• Package / Case: DO-219AB (required match)
• Mounting Type: Surface Mount (required match)
• Technology: Schottky (required match)
• Speed: Fast Recovery ≤ 500ns, > 200mA (Io) (required match)
• Current - Average Rectified (Io): 2 A (parametric equivalent) or 1 A (similar alternative)
• Operating Temperature Range: -55°C minimum (required match)

Parameter Comparison

Engineering Selection Recommendations

SS210L RVG (Parametric Equivalent): This part is a direct parametric equivalent manufactured by Taiwan Semiconductor Corporation with identical electrical specifications to the SS210LHR3G. Both parts are rated for 100 V reverse voltage, 2 A average rectified current, and 850 mV forward voltage at 2 A. The SS210L RVG maintains the same operating temperature range (-55°C to 150°C) and is ROHS3 compliant. This part is suitable for direct substitution in applications requiring the full 2 A current capacity. Automotive grade and AEC-Q101 qualification status are not specified for this variant.

SS1FH10HM3/H (Similar - 1 A Rated): This Vishay part is rated for 100 V reverse voltage with 1 A average rectified current capacity. It features AEC-Q101 automotive qualification and automotive grade designation, matching the compliance profile of the main part. The extended operating temperature range (-55°C to 175°C) provides additional thermal margin. This part is suitable for applications where current requirements do not exceed 1 A.

SS2FH10HM3/H (Similar - 2 A Rated): This Vishay part maintains the 100 V reverse voltage and 2 A average rectified current specifications of the main part. It includes AEC-Q101 automotive qualification and automotive grade designation. The extended operating temperature range (-55°C to 175°C) provides additional thermal capability. Forward voltage is specified at 860 mV @ 2 A, representing a 10 mV increase from the main part specification.

SS1FH10-M3/H and SS2FH10-M3/H (Similar - Non-Automotive Variants): These Vishay parts provide equivalent electrical specifications without automotive grade or AEC-Q101 qualification designations. They are suitable for non-automotive applications where compliance certifications are not required.

Frequently Asked Questions (FAQ)

Q: Can SS210L RVG be used as a direct replacement for SS210LHR3G?

A: Yes. The SS210L RVG is a parametric equivalent with identical voltage rating (100 V), current rating (2 A), forward voltage (850 mV @ 2 A), and package configuration (DO-219AB). Both parts are manufactured by Taiwan Semiconductor Corporation and are ROHS3 compliant. The primary difference is packaging format (Cut Tape & Digi-Reel® versus standard packaging).

Q: What is the difference between the 1 A and 2 A rated Vishay parts?

A: The SS1FH10 series (1 A rated) and SS2FH10 series (2 A rated) differ in average rectified current capacity. Both maintain the same 100 V reverse voltage rating, DO-219AB package, and fast recovery speed characteristics. Selection between these series depends on the application's current requirements. The 1 A series is suitable for lower-current applications, while the 2 A series matches the main part's current capacity.

Q: Are the Vishay eSMP® series parts compatible with the Taiwan Semiconductor Corporation SS210LHR3G?

A: Yes, from a package and electrical standpoint. All substitute parts use the DO-219AB package and share the same 100 V reverse voltage rating, fast recovery speed, and surface mount configuration. The Vishay eSMP® series parts (SS1FH10 and SS2FH10 families) are electrically compatible. Differences exist in current ratings, forward voltage specifications, and automotive qualification status.

Q: Which substitute part should be selected for automotive applications?

A: For automotive applications requiring AEC-Q101 qualification and automotive grade designation, select either SS1FH10HM3/H (1 A rated) or SS2FH10HM3/H (2 A rated) from Vishay. Both parts carry AEC-Q101 qualification matching the main part's compliance profile. The SS210L RVG does not specify automotive grade or AEC-Q101 qualification status.

Q: What is the impact of the extended operating temperature range in Vishay parts?

A: Vishay substitute parts specify an operating temperature range of -55°C to 175°C, compared to -55°C to 150°C for the main part. This extended upper temperature limit provides additional thermal margin in high-temperature applications. The lower temperature limit (-55°C) is identical across all parts.

Q: Can 1 A rated parts be used in applications designed for 2 A?

A: No. The SS1FH10 series (1 A rated) cannot be used in applications requiring 2 A average rectified current. Using an undersized current rating creates risk of component failure and circuit malfunction. Current rating must meet or exceed application requirements.

Q: What packaging options are available for substitute parts?

A: The SS210L RVG is available in Cut Tape (CT) & Digi-Reel® packaging. Vishay parts are available in either Tape & Reel (TR) or Cut Tape (CT) & Digi-Reel® formats depending on the specific part number variant. Packaging selection does not affect electrical compatibility but influences procurement and handling procedures.

Q: Are all substitute parts ROHS3 compliant?

A: Yes. All listed substitute parts (SS210L RVG, SS1FH10-M3/H, SS1FH10HM3/H, SS2FH10-M3/H, and SS2FH10HM3/H) are ROHS3 compliant, matching the main part's environmental compliance status.