SS1H15LS RVG Equivalent & Substitute Parts

Part Overview

The SS1H15LS RVG is a Schottky rectifier diode manufactured by Taiwan Semiconductor Corporation, rated for 150V DC reverse voltage and 1A average rectified current in a surface mount SOD-123HE package. This component is classified as Active product status and is RoHS3 compliant with unlimited moisture sensitivity level (MSL 1).

Schottky diodes of this specification are used in power supply circuits, voltage regulation applications, and reverse polarity protection where fast recovery characteristics and low forward voltage drop are required. Alternative part numbers become necessary when primary inventory is unavailable, when specific packaging formats are required, or when design requirements necessitate components with additional qualifications such as automotive-grade certifications.

Substiute Parts

SS1H15LS RVG

Taiwan Semiconductor CorporationIn Stock: 1343SS1H15LS RVG Datasheet

Current PartRFQ

SS10150HE-AU_R1_000A1

Panjit International Inc.In Stock: 3681SS10150HE-AU_R1_000A1 Datasheet

Parametric EquivalentRFQ

SS10150HE_R1_00001

Panjit International Inc.In Stock: 10124SS10150HE_R1_00001 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the SS1H15LS RVG is determined by strict equivalence across the following critical parameters:

Mandatory Equivalence Parameters:

• Voltage - DC Reverse (Vr) (Max): 150 V
• Current - Average Rectified (Io): 1 A
• Voltage - Forward (Vf) (Max) @ If: 850 mV @ 1 A
• Speed: Fast Recovery ≤ 500ns, > 200mA (Io)
• Package / Case: SOD-123H
• Mounting Type: Surface Mount
• Operating Temperature - Junction: -55°C to 150°C
• Technology: Schottky
• RoHS Status: ROHS3 Compliant

All identified substitute parts maintain these core electrical and mechanical specifications. Variations in Current - Reverse Leakage @ Vr and Capacitance @ Vr, F do not disqualify substitution when all mandatory parameters are met. Packaging format differences (Cut Tape versus Tape & Reel) represent logistical variations that do not affect electrical compatibility.

Parameter Comparison

Engineering Selection Recommendations

SS10150HE-AU_R1_000A1 (Panjit International Inc.)

This substitute part is qualified to AEC-Q101 automotive standard and carries automotive-grade designation. Selection of this part is appropriate for applications requiring automotive qualification or when automotive-grade reliability standards are specified in design requirements. The part maintains all mandatory electrical parameters and operates across the full temperature range. Tape & Reel packaging format is suitable for high-volume production environments.

SS10150HE_R1_00001 (Panjit International Inc.)

This substitute part provides equivalent electrical performance without automotive-grade qualification. Selection is appropriate for general industrial and commercial applications where automotive qualification is not required. The part maintains all mandatory electrical parameters and operates across the full temperature range. Tape & Reel packaging format is suitable for high-volume production environments.

Both substitute parts are manufactured by Panjit International Inc., an active producer of Schottky rectifier diodes. All three parts maintain ROHS3 compliance and unlimited moisture sensitivity level (MSL 1), ensuring compatibility with standard surface mount assembly processes.

Frequently Asked Questions (FAQ)

Q: Can SS10150HE-AU_R1_000A1 or SS10150HE_R1_00001 be used as direct replacements for SS1H15LS RVG?

A: Yes. Both parts maintain identical voltage ratings (150V), current ratings (1A), forward voltage characteristics (850 mV @ 1 A), and fast recovery speed specifications (≤ 500ns, > 200mA). All three parts use the SOD-123H surface mount package and operate across -55°C to 150°C. Electrical substitution is valid.

Q: What is the difference between the two Panjit substitute parts?

A: SS10150HE-AU_R1_000A1 carries AEC-Q101 automotive qualification and automotive-grade designation. SS10150HE_R1_00001 does not carry automotive qualification. Both parts have identical electrical specifications and package format (Tape & Reel). Selection depends on whether automotive qualification is required by design specifications.

Q: Why do the Panjit parts show higher reverse leakage current (30 µA) compared to the Taiwan Semiconductor part (1 µA)?

A: Reverse leakage current variation within the specified maximum ratings does not disqualify substitution. Both values are within acceptable limits for Schottky diode operation in the specified application class. The 150V reverse voltage rating and 1A forward current rating remain unchanged.

Q: Are there packaging format differences between these parts?

A: Yes. SS1H15LS RVG is supplied in Cut Tape (CT) format. Both Panjit substitute parts are supplied in Tape & Reel (TR) format. Tape & Reel format is standard for high-volume surface mount assembly. Cut Tape format is typically used for lower-volume or manual assembly applications. Format selection depends on production volume and assembly equipment capabilities.

Q: Do all three parts meet RoHS compliance requirements?

A: Yes. All three parts are ROHS3 compliant and carry unlimited moisture sensitivity level (MSL 1), indicating compatibility with standard surface mount assembly processes without special moisture control requirements.

Q: Can these parts be used interchangeably in existing PCB designs?

A: Yes. All three parts use identical SOD-123H surface mount package geometry and pin configuration. PCB footprints and assembly processes require no modification for substitution.