SS16L RVG Equivalent & Substitute Parts

Part Overview

The SS16L RVG is a Schottky rectifier diode manufactured by Taiwan Semiconductor Corporation, rated for 60 V DC reverse voltage and 1 A average rectified current in a Sub SMA surface mount package. This component is actively stocked and compliant with RoHS3 and REACH regulations. Substitute parts are identified based on matching electrical specifications and package compatibility within the Schottky diode rectifier category. Alternative sources and packaging formats are available to support procurement flexibility and supply chain continuity.

Key Parameters

Parameter	Value
Voltage - DC Reverse (Vr) (Max)	60 V
Current - Average Rectified (Io)	1 A
Voltage - Forward (Vf) (Max) @ If	700 mV @ 1 A
Speed	Fast Recovery ≤ 500ns, > 200mA (Io)
Current - Reverse Leakage @ Vr	400 µA @ 60 V
Package / Case	DO-219AB
Mounting Type	Surface Mount
Operating Temperature - Junction	-55°C ~ 150°C
RoHS Status	RoHS3 Compliant
Moisture Sensitivity Level (MSL)	1 (Unlimited)

Substitute Part Grouping Explanation

Substitute parts for the SS16L RVG are classified based on electrical parameter equivalence and mechanical compatibility. The primary substitution criteria are:

Parametric Equivalents: Parts matching all critical electrical specifications—60 V reverse voltage, 1 A average rectified current, 700 mV forward voltage at 1 A, and fast recovery speed characteristics—within the same DO-219AB package footprint.

Similar Manufacturers: Parts from alternative manufacturers (Vishay General Semiconductor - Diodes Division) that meet or exceed the electrical performance requirements while maintaining package and mounting compatibility.

Packaging Variants: Alternative packaging formats (Tape & Reel versus Cut Tape & Digi-Reel®) of the same base part number, suitable for different procurement and assembly workflows.

The following parameters determine substitution eligibility:

Voltage - DC Reverse (Vr) (Max): 60 V (minimum requirement)
Current - Average Rectified (Io): 1 A (minimum requirement)
Package / Case: DO-219AB (mechanical compatibility)
Mounting Type: Surface Mount (assembly compatibility)
Technology: Schottky (functional equivalence)

Parameter Comparison

Parameter	SS16L RVG	SS16L R3G	SS1FH6-M3/H	SS1FH6HM3/H	SS2FH6HM3/H
Manufacturer	Taiwan Semiconductor Corporation	Taiwan Semiconductor Corporation	Vishay General Semiconductor - Diodes Division	Vishay General Semiconductor - Diodes Division	Vishay General Semiconductor - Diodes Division
Voltage - DC Reverse (Vr) (Max)	60 V	60 V	60 V	60 V	60 V
Current - Average Rectified (Io)	1 A	1 A	1 A	1 A	2 A
Voltage - Forward (Vf) (Max) @ If	700 mV @ 1 A	700 mV @ 1 A	700 mV @ 1 A	700 mV @ 1 A	780 mV @ 2 A
Speed	Fast Recovery ≤ 500ns, > 200mA (Io)	Fast Recovery ≤ 500ns, > 200mA (Io)	Fast Recovery ≤ 500ns, > 200mA (Io)	Fast Recovery ≤ 500ns, > 200mA (Io)	Fast Recovery ≤ 500ns, > 200mA (Io)
Current - Reverse Leakage @ Vr	400 µA @ 60 V	400 µA @ 60 V	3 µA @ 60 V	3 µA @ 60 V	3 µA @ 60 V
Package / Case	DO-219AB	DO-219AB	DO-219AB	DO-219AB	DO-219AB
Mounting Type	Surface Mount	Surface Mount	Surface Mount	Surface Mount	Surface Mount
Operating Temperature - Junction	-55°C ~ 150°C	-55°C ~ 150°C	-55°C ~ 175°C	-55°C ~ 175°C	-55°C ~ 175°C
RoHS Status	RoHS3 Compliant	RoHS3 Compliant	RoHS3 Compliant	RoHS3 Compliant	RoHS3 Compliant
Moisture Sensitivity Level (MSL)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)
Product Status	Active	Discontinued at DiGi Electronics	Active	Active	Active

Engineering Selection Recommendations

SS16L R3G (Taiwan Semiconductor Corporation): This part is a parametric equivalent to the SS16L RVG, offering identical electrical specifications and package compatibility. However, this part number is discontinued at DiGi Electronics, limiting long-term procurement viability. Selection is appropriate only when existing inventory is available and supply continuity is not a concern.

SS1FH6-M3/H (Vishay General Semiconductor - Diodes Division): This part meets all electrical requirements for the SS16L RVG with superior reverse leakage characteristics (3 µA versus 400 µA) and extended operating temperature range (-55°C to 175°C versus -55°C to 150°C). The part is actively produced and maintains high inventory availability. This part is suitable for direct substitution in applications where the lower leakage current and wider temperature range provide operational benefits.

SS1FH6HM3/H (Vishay General Semiconductor - Diodes Division): This part is electrically equivalent to SS1FH6-M3/H with the addition of automotive-grade qualification (AEC-Q101). Selection is appropriate for automotive applications or where automotive-grade reliability standards are specified. The part is actively produced with adequate inventory.

SS2FH6HM3/H (Vishay General Semiconductor - Diodes Division): This part is rated for 2 A average rectified current, exceeding the 1 A requirement of the SS16L RVG. Forward voltage is specified at 780 mV @ 2 A. This part is suitable for applications requiring higher current capacity while maintaining 60 V reverse voltage rating and DO-219AB package compatibility. The part includes automotive-grade qualification (AEC-Q101) and is actively produced.

All substitute parts maintain RoHS3 compliance, REACH unaffected status, and MSL 1 rating, ensuring regulatory and handling compatibility with the original SS16L RVG.

Frequently Asked Questions (FAQ)

Q: Can the SS16L R3G be used as a direct replacement for the SS16L RVG?

A: The SS16L R3G is electrically and mechanically equivalent to the SS16L RVG. However, this part is discontinued at DiGi Electronics. Direct substitution is possible only if existing inventory is available and future procurement is not required.

Q: What are the advantages of using Vishay SS1FH6-M3/H instead of the Taiwan Semiconductor SS16L RVG?

A: The SS1FH6-M3/H offers lower reverse leakage current (3 µA versus 400 µA at 60 V) and an extended operating temperature range (-55°C to 175°C versus -55°C to 150°C). The part is actively produced with high inventory availability, supporting long-term supply chain stability.

Q: Is the SS1FH6HM3/H suitable for automotive applications?

A: Yes. The SS1FH6HM3/H carries automotive-grade qualification (AEC-Q101) and is suitable for automotive applications. It is electrically equivalent to the SS1FH6-M3/H with the addition of automotive reliability standards.

Q: Can the SS2FH6HM3/H be used in place of the SS16L RVG?

A: The SS2FH6HM3/H is mechanically compatible and maintains the 60 V reverse voltage rating. However, it is rated for 2 A average rectified current, which exceeds the 1 A requirement. This part is suitable for applications requiring higher current capacity. Forward voltage characteristics differ slightly (780 mV @ 2 A versus 700 mV @ 1 A), reflecting the higher current rating.

Q: Are all substitute parts RoHS3 compliant?

A: Yes. All substitute parts listed—SS16L R3G, SS1FH6-M3/H, SS1FH6HM3/H, and SS2FH6HM3/H—are RoHS3 compliant and REACH unaffected, matching the regulatory status of the SS16L RVG.

Q: What is the difference between Tape & Reel (TR) and Cut Tape & Digi-Reel® packaging?

A: Tape & Reel (TR) packaging is supplied on continuous tape for automated assembly equipment. Cut Tape & Digi-Reel® packaging is supplied in cut tape format, suitable for manual assembly or lower-volume production. Both formats contain the same component; packaging selection depends on assembly workflow and volume requirements.

Q: Do all substitute parts use the same DO-219AB package footprint?

A: Yes. All substitute parts use the DO-219AB package, ensuring mechanical and footprint compatibility with the SS16L RVG. Surface mount assembly processes and PCB layouts remain unchanged.

Q: What is the moisture sensitivity level (MSL) for all parts?

A: All parts, including the SS16L RVG and all substitutes, carry MSL 1 (Unlimited) rating, indicating no moisture sensitivity restrictions during storage or handling.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message