SS16LHRVG Equivalent & Substitute Parts

Part Overview

The SS16LHRVG is a Schottky rectifier diode manufactured by Taiwan Semiconductor Corporation, rated for 60 V DC reverse voltage and 1 A average rectified current in a Sub SMA surface mount package. This component is classified as Active product status and carries AEC-Q101 automotive qualification with ROHS3 compliance. Substitute parts are identified when equivalent electrical performance and mechanical compatibility are required due to inventory constraints, supply chain considerations, or design flexibility needs.

Substiute Parts

SS16LHRVG

Taiwan Semiconductor CorporationIn Stock: 1118SS16LHRVG Datasheet

Current PartRFQ

SS16L R3G

Taiwan Semiconductor CorporationIn Stock: 2536SS16L R3G Datasheet

Parametric EquivalentRFQ

SS1FH6-M3/H

Vishay General Semiconductor - Diodes DivisionIn Stock: 360489SS1FH6-M3/H Datasheet

SimilarRFQ

SS1FH6HM3/H

Vishay General Semiconductor - Diodes DivisionIn Stock: 15439SS1FH6HM3/H Datasheet

SimilarRFQ

SS2FH6HM3/H

Vishay General Semiconductor - Diodes DivisionIn Stock: 37523SS2FH6HM3/H Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the SS16LHRVG are identified based on strict electrical and mechanical parameter equivalence. The primary substitution criteria are:

Critical Matching Parameters:

• Voltage - DC Reverse (Vr) (Max): 60 V
• Current - Average Rectified (Io): 1 A
• Voltage - Forward (Vf) (Max) @ If: 700 mV @ 1 A
• Package / Case: DO-219AB
• Mounting Type: Surface Mount
• Technology: Schottky
• Speed: Fast Recovery ≤ 500ns, > 200mA (Io)

Parametric Equivalent Classification: The part SS16L R3G (Taiwan Semiconductor Corporation) is a parametric equivalent with identical electrical ratings and package specifications. This part shares the same base product number (SS16) and maintains all critical electrical parameters.

Similar Manufacturer Classification: Parts SS1FH6-M3/H, SS1FH6HM3/H, and SS2FH6HM3/H (Vishay General Semiconductor - Diodes Division) are classified as similar manufacturers. These parts maintain the same 60 V reverse voltage rating, DO-219AB package, and fast recovery Schottky technology. Differences in current rating, reverse leakage characteristics, and operating temperature range are noted in the parameter comparison table.

Parameter Comparison

Engineering Selection Recommendations

Parametric Equivalent (SS16L R3G): The SS16L R3G maintains complete electrical and mechanical equivalence to the SS16LHRVG with identical voltage ratings, current specifications, and forward voltage characteristics. Both parts share the same base product number and package designation. However, SS16L R3G is listed as discontinued at DiGi Electronics, which may impact long-term availability. This part is suitable for direct substitution in active designs where supply of the primary part is constrained.

Similar Manufacturer - 1 A Rated Parts (SS1FH6-M3/H and SS1FH6HM3/H): Both Vishay parts maintain the critical 60 V reverse voltage and 1 A current ratings with identical forward voltage specifications at 1 A. These parts offer superior reverse leakage characteristics (3 µA versus 400 µA) and extended operating temperature range (-55°C to 175°C versus -55°C to 150°C). The SS1FH6HM3/H carries automotive grade and AEC-Q101 qualification, matching the compliance profile of the main part. The SS1FH6-M3/H is active product status without automotive grade designation. Both are suitable for applications requiring equivalent 1 A performance with enhanced leakage specifications.

Similar Manufacturer - 2 A Rated Part (SS2FH6HM3/H): The SS2FH6HM3/H is rated for 2 A average rectified current with 780 mV forward voltage at 2 A. This part maintains the 60 V reverse voltage rating and DO-219AB package. The higher current rating provides design margin for applications with potential current transients or future design upgrades. This part carries automotive grade and AEC-Q101 qualification. Selection of this part is appropriate when circuit design permits the higher current rating and forward voltage drop at elevated currents.

Frequently Asked Questions (FAQ)

Q: Can SS16L R3G be used as a direct replacement for SS16LHRVG?

A: Yes. SS16L R3G is a parametric equivalent with identical voltage ratings (60 V), current specifications (1 A), forward voltage characteristics (700 mV @ 1 A), and package designation (DO-219AB). Both parts are manufactured by Taiwan Semiconductor Corporation and share the same base product number. The primary consideration is product availability, as SS16L R3G is listed as discontinued at DiGi Electronics.

Q: What are the key differences between Taiwan Semiconductor and Vishay substitute parts?

A: The Vishay parts (SS1FH6-M3/H, SS1FH6HM3/H, SS2FH6HM3/H) offer significantly lower reverse leakage current (3 µA versus 400 µA at 60 V) and extended operating temperature range (175°C maximum versus 150°C). The SS1FH6HM3/H and SS2FH6HM3/H include automotive grade and AEC-Q101 qualification matching the main part. All parts maintain the same 60 V reverse voltage rating and DO-219AB package.

Q: Is the SS2FH6HM3/H suitable for a 1 A application?

A: Yes. The SS2FH6HM3/H is rated for 2 A average rectified current, which exceeds the 1 A requirement of the SS16LHRVG. The part maintains the same 60 V reverse voltage rating and DO-219AB package. The forward voltage at 1 A operation will be lower than the specified 780 mV @ 2 A rating. This part is suitable for applications where higher current capacity provides design margin.

Q: Are all substitute parts in the same package?

A: Yes. All substitute parts use the DO-219AB package with Sub SMA or DO-219AB (SMF) supplier device package designation. All parts are surface mount components with identical mechanical compatibility for PCB assembly.

Q: Which substitute part should be selected for automotive applications?

A: For automotive applications requiring AEC-Q101 qualification, select either SS1FH6HM3/H or SS2FH6HM3/H from Vishay General Semiconductor. Both parts carry automotive grade designation and AEC-Q101 qualification. The SS1FH6HM3/H maintains the 1 A current rating of the main part, while SS2FH6HM3/H provides 2 A capacity. The SS16L R3G parametric equivalent does not specify automotive grade or AEC-Q101 qualification.

Q: What is the impact of reverse leakage current differences?

A: The Vishay parts exhibit 3 µA reverse leakage at 60 V compared to 400 µA for the Taiwan Semiconductor parts. Lower reverse leakage reduces power dissipation and heat generation in the diode, particularly in applications with sustained reverse bias conditions. This characteristic may be significant in precision analog circuits or high-temperature environments.

Q: Can these parts be used interchangeably in PCB assembly?

A: Yes. All substitute parts use the DO-219AB package with identical mechanical dimensions and surface mount footprint. PCB assembly processes, solder reflow profiles, and handling procedures remain unchanged. No PCB redesign is required for substitution.