SS15 Equivalent & Substitute Parts Reference

Part Overview

SS15 is a Schottky rectifier diode manufactured by Taiwan Semiconductor Corporation. It features a 50 V maximum DC reverse voltage and supports a continuous average rectified current of 1A, packaged in the DO-214AC (SMA) surface-mount case. SS15 is presently classified as “Active.” Identifying equivalent or substitute parts is necessary to accommodate considerations such as multi-source qualification, supply chain resilience, and alternative fitting in existing circuit designs, while maintaining equivalent electrical and regulatory characteristics.

Substiute Parts

SS15

Taiwan Semiconductor CorporationIn Stock: 50992SS15 Datasheet

Current PartRFQ

PMEG6010ER,115

Nexperia USA Inc.In Stock: 3218PMEG6010ER,115 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

The substitute part grouping is determined strictly by matching all relevant electrical parameters and compliance statuses for Schottky rectifier diodes. Key parameters used for compatibility include: voltage rating (DC reverse), current rating (average rectified), forward voltage at rated current, reverse leakage current, package type, mounting method, compliance with RoHS and REACH, and product status. Parts are included as substitutes only if every parameter falls within the permissible bounds as explicitly specified.

Parameter Comparison

Engineering Selection Recommendations

Both the SS15 and the substitute PMEG6010ER,115 are listed as "Active" and are RoHS3 compliant, REACH unaffected, and have an ECCN value of EAR99. Moisture Sensitivity Level is 1 (Unlimited) for both. Selection between these products can be made based strictly on these compliance and product status attributes when considering supply chain and certification requirements.

Frequently Asked Questions (FAQ)

Q1: What are the essential criteria when substituting SS15 with another Schottky diode?
A1: Key criteria are voltage rating (DC reverse), current rating (average rectified), forward voltage (Vf) at 1A, reverse leakage current, surface-mount capability, package compatibility, RoHS and REACH status, and product activeness.

Q2: Is the package form factor important for substitution?
A2: Yes, the package/case (e.g., DO-214AC, SMA, or SOD-123W) and mounting type must be matched based on PCB footprint and assembly requirements.

Q3: Can SS15 and PMEG6010ER,115 be interchanged in the same application?
A3: Both are Schottky rectifiers with comparable electrical parameters, surface-mount packages, and equivalent compliance statuses. Mechanical compatibility is determined by the specified package types.

Q4: Are there any differences in compliance or certifications?
A4: Both SS15 and PMEG6010ER,115 are RoHS3 compliant, REACH unaffected, and listed under ECCN EAR99 with MSL 1 (Unlimited).

Q5: What supply chain advantages exist when cross-referencing SS15 and PMEG6010ER,115?
A5: Both parts are "Active" with inventory listed, supporting multi-sourcing and risk mitigation in procurement.