Equivalent & Substitute Parts for SS14M1G10

Part Overview

The SS14M1G10 is a socket contact for circular connectors manufactured by Amphenol Sine Systems Corp in the ecomate® Aquarius™ series. This component is designed for signal applications with 14-16 AWG wire gauges, utilizing a crimp termination method with gold plating. The part is currently classified as obsolete, making identification of active equivalent models essential for procurement and system continuity. Substitute parts must maintain identical electrical and mechanical parameters to ensure compatibility within connector assemblies.

Substiute Parts

SS14M1G10

Amphenol Sine Systems CorpIn Stock: 998SS14M1G10 Datasheet

Current PartRFQ

SS14M2G10

Amphenol Sine Systems CorpIn Stock: 1098SS14M2G10 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the SS14M1G10 must conform to the following critical parameters to ensure functional compatibility:

• Contact Type: Socket configuration for signal applications
• Contact Size: Size 16 specification
• Wire Gauge Compatibility: 14-16 AWG (2.0 ~ 2.5 mm²)
• Termination Method: Crimp connection
• Contact Material and Finish: Copper Alloy with gold plating at 10.0 µin (0.25 µm)
• Series Compliance: ecomate® Aquarius™ series
• Base Product: SS14 family components

The SS14M2G10 is classified as a direct equivalent based on matching all critical electrical and mechanical parameters. The primary distinction is product status: SS14M2G10 is active, whereas SS14M1G10 is obsolete. The SS14M2G10 is supplied in Tape & Reel packaging, compared to the bulk packaging of the original part.

Parameter Comparison

Engineering Selection Recommendations

The SS14M2G10 functions as a full electrical and mechanical equivalent to the obsolete SS14M1G10. Both components share identical contact specifications, material composition, and finish thickness. The transition from SS14M1G10 to SS14M2G10 is appropriate for new designs and component replenishment.

The SS14M2G10 maintains full compliance with RoHS3 and REACH requirements, matching the regulatory status of the original part. The MSL rating of 1 (Unlimited) indicates no moisture sensitivity constraints for either component.

The primary operational distinction is packaging format: SS14M2G10 is supplied in Tape & Reel configuration, suitable for automated assembly processes, while SS14M1G10 was supplied in bulk packaging. This packaging change does not affect electrical or mechanical performance.

Frequently Asked Questions (FAQ)

Q: Can SS14M2G10 be used as a direct replacement for SS14M1G10 in existing assemblies?

A: Yes. The SS14M2G10 maintains identical electrical and mechanical specifications, including contact size, wire gauge compatibility, termination method, and material composition. The components are fully interchangeable.

Q: What is the difference between the two parts?

A: The primary differences are product status (SS14M2G10 is active; SS14M1G10 is obsolete) and packaging method (SS14M2G10 uses Tape & Reel; SS14M1G10 used bulk packaging). All technical parameters are identical.

Q: Does the Tape & Reel packaging affect component performance?

A: No. Packaging format does not affect electrical or mechanical performance. Tape & Reel packaging is optimized for automated assembly processes and provides identical functional characteristics to bulk-packaged components.

Q: Are there any compliance differences between these parts?

A: No. Both SS14M1G10 and SS14M2G10 maintain identical RoHS3 and REACH compliance status. Both are rated MSL 1 (Unlimited) for moisture sensitivity.

Q: Can these components be used interchangeably in crimped cable assemblies?

A: Yes. Both parts use identical crimp termination specifications for 14-16 AWG wire, with matching contact geometry and material composition.

This document is ready to paste directly into a web Markdown editor and follows all specified structural and formatting requirements.