SS11V-R13052-CH Common Mode Choke Equivalent & Substitute Parts

Part Overview

The SS11V-R13052-CH is a 2-line common mode choke manufactured by KEMET, designed for power line filtering applications. This through-hole component operates at 5.2 mH inductance at 1 kHz with a maximum current rating of 1.3A and DC resistance of 280mOhm. The part is currently active in production with 689 units in stock.

Substitute parts are identified when equivalent electrical performance can be achieved within the allowed parameter tolerances for this product category, or when alternative inductance values serve specific circuit requirements while maintaining compatibility with the mounting interface and current rating specifications.

Substiute Parts

SS11V-R13052-CH

KEMETIn Stock: 705SS11V-R13052-CH Datasheet

Current PartRFQ

SS11VL-13035

KEMETIn Stock: 4376SS11VL-13035 Datasheet

Parametric EquivalentRFQ

SU10VFC-R13025

KEMETIn Stock: 1343SU10VFC-R13025 Datasheet

Parametric EquivalentRFQ

SS11VL-R13052

KEMETIn Stock: 870SS11VL-R13052 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the SS11V-R13052-CH are grouped based on the following critical parameters that determine functional compatibility:

Primary Compatibility Criteria:

• Number of Lines: 2 (fixed requirement)
• Mounting Type: Through Hole (fixed requirement)
• Package / Case: Vertical, 4 PC Pin (fixed requirement)
• Current Rating (Max): 1.3A (fixed requirement)
• Voltage Rating - AC: 250V (fixed requirement)
• Operating Temperature Range: -25°C to 120°C (fixed requirement)

Variable Parameters Allowing Substitution:

• Inductance @ 1 kHz: 5.2 mH (main part), 3.5 mH or 2.5 mH (substitutes)
• DC Resistance (Max): 280mOhm (main part), 280mOhm or 300mOhm (substitutes)
• Physical Dimensions: Variations within the through-hole mounting footprint

The SS11VL-R13052 maintains identical electrical specifications to the main part with packaging differences. The SS11VL-13035 provides reduced inductance at 3.5 mH while maintaining all other critical parameters. The SU10VFC-R13025 offers further reduced inductance at 2.5 mH with slightly increased DCR and different physical dimensions, suitable for applications requiring lower inductance values within the same current and voltage envelope.

Parameter Comparison

Engineering Selection Recommendations

SS11VL-R13052 Selection: This part is electrically identical to the main part SS11V-R13052-CH, maintaining 5.2 mH inductance and 280mOhm DCR. The primary difference is packaging format (Bulk versus the original packaging). Both parts are Active status with REACH Unaffected and EAR99 classification. Selection of this substitute is appropriate when packaging format is not a constraint and inventory availability is a consideration (819 units in stock).

SS11VL-13035 Selection: This substitute operates at 3.5 mH inductance, representing a 33% reduction from the main part while maintaining identical current rating (1.3A), DC resistance (280mOhm), and voltage rating (250V AC). All critical electrical parameters except inductance remain constant. Physical height is reduced to 19.50mm. This part is suitable for applications where lower inductance filtering is acceptable or required. Product status is Active with full compliance certifications (ROHS3 Compliant, REACH Unaffected, EAR99). Inventory availability is high at 4324 units.

SU10VFC-R13025 Selection: This substitute provides the lowest inductance option at 2.5 mH with a 52% reduction from the main part specification. DC resistance increases to 300mOhm (20mOhm higher than main part). Physical dimensions are reduced (18.00mm L x 15.50mm W x 15.00mm H). Current rating and voltage rating remain at 1.3A and 250V AC respectively. This part is suitable for applications requiring minimal inductance filtering within the same current envelope. Product status is Active with ROHS3 Compliance and REACH Unaffected status. Inventory is available at 1320 units.

All substitute parts maintain Active product status and full regulatory compliance (REACH Unaffected, EAR99 classification).

Frequently Asked Questions (FAQ)

Q: Can SS11VL-R13052 be used as a direct replacement for SS11V-R13052-CH?

A: Yes. Both parts maintain identical electrical specifications: 5.2 mH inductance at 1 kHz, 1.3A current rating, 280mOhm DC resistance, and 250V AC voltage rating. The difference is packaging format. Verify that packaging format is not a design constraint before substitution.

Q: What is the difference between SS11VL-13035 and the main part SS11V-R13052-CH?

A: The SS11VL-13035 has reduced inductance at 3.5 mH compared to 5.2 mH in the main part. All other electrical parameters are identical: 1.3A current rating, 280mOhm DCR, 250V AC voltage rating, and -25°C to 120°C operating temperature. Physical height is reduced from 22.50mm to 19.50mm.

Q: When should SU10VFC-R13025 be selected over SS11VL-13035?

A: Select SU10VFC-R13025 when the application requires the lowest inductance value (2.5 mH) and when the increased DC resistance of 300mOhm is acceptable. This part also offers the smallest physical footprint (18.00mm L x 15.50mm W x 15.00mm H). Both parts maintain 1.3A current rating and 250V AC voltage rating.

Q: Are all substitute parts through-hole mounted with 4-pin vertical configuration?

A: Yes. All substitute parts listed maintain through-hole mounting with vertical 4-pin package configuration, ensuring compatibility with existing PCB layouts designed for the main part.

Q: What is the impact of increased DC resistance in SU10VFC-R13025?

A: The SU10VFC-R13025 has 300mOhm maximum DC resistance compared to 280mOhm in the main part and SS11VL-13035. This 20mOhm increase results in higher power dissipation at rated current. At 1.3A, the additional dissipation is approximately 50.7mW. Verify thermal performance in the target application.

Q: Do all parts meet the same regulatory requirements?

A: All parts listed are REACH Unaffected and classified as EAR99. The substitute parts SS11VL-R13052, SS11VL-13035, and SU10VFC-R13025 are additionally ROHS3 Compliant. All parts operate within -25°C to 120°C temperature range and are rated for 250V AC.

Q: What is the inventory status for each part?

A: SS11V-R13052-CH: 689 units; SS11VL-R13052: 819 units; SS11VL-13035: 4324 units; SU10VFC-R13025: 1320 units. All parts are listed as New Original In Stock.