KEMET SS11V-R10093-CH Common Mode Choke Equivalent & Substitute Parts

Part Overview

The KEMET SS11V-R10093-CH is a 2-line common mode choke (CMC) designed for power line filtering applications. This through-hole component features 9.3 mH inductance at 1 kHz with a 1A maximum current rating and 440 mOhm DC resistance. The part is classified as Active product status with ROHS3 compliance and REACH unaffected designation. Substitute parts are identified when equivalent electrical performance and mechanical compatibility are required for design flexibility, inventory management, or component availability.

Substiute Parts

SS11V-R10093-CH

KEMETIn Stock: 1084SS11V-R10093-CH Datasheet

Current PartRFQ

SS11VL-10062

KEMETIn Stock: 1478SS11VL-10062 Datasheet

Parametric EquivalentRFQ

SS11VL-11050

KEMETIn Stock: 1545SS11VL-11050 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the SS11V-R10093-CH are identified based on the following allowed electrical and mechanical parameters:

Critical Matching Parameters:

• Filter Type: Power Line
• Number of Lines: 2
• Mounting Type: Through Hole
• Package / Case: Vertical, 4 PC Pin
• Voltage Rating - AC: 250V
• Operating Temperature Range: -25°C to 120°C
• RoHS Status: ROHS3 Compliant
• REACH Status: REACH Unaffected

Variable Parameters (Allowed Substitution Range):

• Inductance @ 1 kHz: 5 mH to 9.3 mH
• Current Rating (Max): 1A to 1.1A
• DC Resistance (Max): 400 mOhm to 440 mOhm
• Height (Max): 19.50 mm to 22.50 mm

The two identified substitute parts maintain identical footprint dimensions (22.00 mm L x 14.50 mm W) and all critical electrical specifications while offering variations in inductance, current capacity, and DC resistance within acceptable engineering tolerances for power line filtering applications.

Parameter Comparison

Engineering Selection Recommendations

All three parts—SS11V-R10093-CH, SS11VL-10062, and SS11VL-11050—maintain Active product status with full ROHS3 compliance and REACH unaffected designation. Selection between these components is determined by application-specific inductance and current requirements within the power line filtering category.

SS11V-R10093-CH provides the highest inductance value at 9.3 mH with standard 1A current capacity and 440 mOhm DC resistance. This configuration is suitable for applications requiring maximum filtering attenuation at 1 kHz.

SS11VL-10062 offers reduced inductance at 6.2 mH while maintaining identical current rating and DC resistance. The lower profile height (19.50 mm versus 22.50 mm) accommodates space-constrained PCB layouts. This part is appropriate for applications where moderate filtering performance and reduced vertical clearance are required.

SS11VL-11050 delivers the lowest inductance at 5 mH with improved current capacity (1.1A) and reduced DC resistance (400 mOhm). The lower profile height matches SS11VL-10062. This configuration is selected for applications prioritizing current handling capability and minimal power dissipation over maximum filtering attenuation.

All substitute parts share identical footprint dimensions (22.00 mm L x 14.50 mm W), AC voltage rating (250V), and operating temperature range (-25°C to 120°C), ensuring direct PCB compatibility and thermal performance equivalence.

Frequently Asked Questions (FAQ)

Q: Can SS11VL-10062 be used as a direct replacement for SS11V-R10093-CH?

A: SS11VL-10062 is mechanically compatible with identical footprint and pin configuration. However, inductance is reduced from 9.3 mH to 6.2 mH. Selection depends on whether the application circuit can tolerate lower filtering attenuation at 1 kHz. All electrical ratings (1A current, 250V AC, 440 mOhm DCR) and compliance certifications remain equivalent.

Q: What is the primary difference between SS11VL-10062 and SS11VL-11050?

A: SS11VL-11050 provides higher current capacity (1.1A versus 1A) and lower DC resistance (400 mOhm versus 440 mOhm), resulting in reduced power dissipation. Inductance is further reduced to 5 mH. Both parts share identical footprint and height (19.50 mm). Selection is based on current handling requirements and acceptable filtering performance for the specific application.

Q: Are all three parts suitable for the same PCB layout?

A: Yes. All three parts maintain identical footprint dimensions (22.00 mm L x 14.50 mm W) and through-hole pin configuration (Vertical, 4 PC Pin). SS11VL-10062 and SS11VL-11050 have reduced height (19.50 mm) compared to SS11V-R10093-CH (22.50 mm), providing additional vertical clearance in space-constrained designs.

Q: Do all substitute parts meet the same environmental and compliance standards?

A: Yes. All three parts are ROHS3 compliant, REACH unaffected, and rated for -25°C to 120°C operating temperature. AC voltage rating is 250V across all variants. Compliance certifications and environmental designations are identical.

Q: Which part should be selected for maximum current handling?

A: SS11VL-11050 is rated for 1.1A maximum current with 400 mOhm DC resistance, providing the highest current capacity and lowest power dissipation. This part is selected when application circuits require enhanced current handling capability within the 2-line common mode choke category.

Q: What is the impact of inductance variation on circuit performance?

A: Inductance determines filtering attenuation at 1 kHz. SS11V-R10093-CH (9.3 mH) provides maximum attenuation. SS11VL-10062 (6.2 mH) and SS11VL-11050 (5 mH) deliver progressively reduced filtering performance. Circuit design must verify that lower inductance values maintain acceptable EMI suppression for the target application.