SS11VL-R10093 Common Mode Choke Equivalent & Substitute Parts

Part Overview

The SS11VL-R10093 is a through-hole mounted common mode choke (CMC) from KEMET's SS series, designed for power line filtering applications. This 2-line component delivers 9.3 mH inductance at 1 kHz with a 1A maximum current rating and 440 mOhm DC resistance. The part is currently active in production and ROHS3 compliant, making it suitable for modern electronic equipment requiring EMI suppression in power distribution circuits.

Substitute parts are necessary when the original component becomes unavailable, when inventory constraints require alternative sourcing, or when design specifications allow for parametric variations within acceptable operating ranges.

Substiute Parts

SS11VL-R10093

KEMETIn Stock: 3774SS11VL-R10093 Datasheet

Current PartRFQ

SS11VL-10062

KEMETIn Stock: 1478SS11VL-10062 Datasheet

Parametric EquivalentRFQ

SS11VL-11050

KEMETIn Stock: 1545SS11VL-11050 Datasheet

Parametric EquivalentRFQ

SS20H-10080

KEMETIn Stock: 1112SS20H-10080 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the SS11VL-R10093 is determined by the following criteria:

Primary Compatibility Parameters:

• Filter Type: Power Line
• Number of Lines: 2
• Mounting Type: Through Hole
• Package / Case: Vertical, 4 PC Pin
• Voltage Rating (AC): 250V
• Operating Temperature Range: -25°C to 120°C
• RoHS Status: ROHS3 Compliant

Secondary Variation Parameters (Allowed Ranges):

• Inductance @ 1 kHz: 5 to 9.3 mH
• Current Rating (Max): 1 to 1.1 A
• DC Resistance (Max): 400 to 440 mOhm

All substitute parts listed maintain identical primary compatibility parameters. Variations in inductance, current rating, and DC resistance are within the parametric tolerance bands established for this component category. Physical dimensions may vary between series designations (SS11VL vs. SS20H) while maintaining the same pin configuration and mounting footprint compatibility.

Parameter Comparison

Engineering Selection Recommendations

All listed substitute parts maintain active product status with ROHS3 compliance and REACH unaffected designation, ensuring regulatory alignment with current manufacturing standards.

SS11VL-10062 Selection: This part provides the closest physical footprint match (22.00mm × 14.50mm × 19.50mm) within the SS11VL series. Inductance is reduced to 6.2 mH with identical current and voltage ratings. DC resistance remains at 440 mOhm. Selection is appropriate when lower inductance values are acceptable within circuit design parameters.

SS11VL-11050 Selection: This part offers the lowest DC resistance (400 mOhm) and highest current rating (1.1A) among substitutes, maintaining identical physical dimensions to the main part. Inductance is 5 mH. Selection is appropriate for applications requiring reduced power dissipation or higher current headroom.

SS20H-10080 Selection: This part represents a different series designation with slightly larger physical dimensions (22.00mm × 22.00mm × 18.50mm) and reduced height (18.50mm vs. 19.50mm). Inductance is 8 mH with 420 mOhm DC resistance. Selection requires verification of PCB layout clearance due to dimensional variation.

All substitute parts share identical electrical ratings (250V AC, -25°C to 120°C operating range) and pin configuration (Vertical, 4 PC Pin), ensuring direct functional compatibility within specified parameter ranges.

Frequently Asked Questions (FAQ)

Q: Can SS11VL-10062 be used as a direct replacement for SS11VL-R10093?

A: SS11VL-10062 is a parametric equivalent with identical physical dimensions, mounting type, and electrical ratings. The primary difference is reduced inductance (6.2 mH vs. 9.3 mH). Direct substitution is possible when circuit design specifications permit lower inductance values. Verify that the 6.2 mH inductance meets EMI filtering requirements for your application.

Q: What is the difference between SS11VL-11050 and the main part?

A: SS11VL-11050 maintains identical physical footprint and mounting configuration. It provides lower DC resistance (400 mOhm vs. 440 mOhm), higher current rating (1.1A vs. 1A), and lower inductance (5 mH vs. 9.3 mH). This part is suitable for applications where reduced power loss and higher current capacity are beneficial.

Q: Why does SS20H-10080 have different dimensions?

A: SS20H-10080 belongs to a different series (SS20H vs. SS11VL) with a larger footprint (22.00mm × 22.00mm vs. 22.00mm × 14.50mm). Despite dimensional differences, it maintains the same pin configuration and electrical ratings. PCB layout verification is required before substitution to ensure clearance compatibility.

Q: Are all substitute parts ROHS3 compliant?

A: Yes. All listed substitute parts (SS11VL-10062, SS11VL-11050, and SS20H-10080) are ROHS3 compliant and REACH unaffected, matching the compliance status of the main part SS11VL-R10093.

Q: What parameters must remain constant for substitution?

A: The following parameters must remain constant: Filter Type (Power Line), Number of Lines (2), Mounting Type (Through Hole), Package configuration (Vertical, 4 PC Pin), Voltage Rating (250V AC), and Operating Temperature Range (-25°C to 120°C). Inductance, current rating, and DC resistance may vary within the specified parametric ranges.

Q: Can I use SS20H-10080 if my PCB layout is tight?

A: SS20H-10080 has a larger width (22.00mm × 22.00mm vs. 22.00mm × 14.50mm) but slightly reduced height (18.50mm vs. 19.50mm). Verify available PCB space before selection. The identical pin configuration ensures electrical compatibility, but physical clearance must be confirmed.