SS-114-T-2 Equivalent & Substitute Parts

Part Overview

The SS-114-T-2 is a 14-position receptacle connector manufactured by Samtec Inc., designed for board-to-board applications with 0.100" (2.54mm) pitch through-hole mounting. This connector features gold-plated mating contacts and tin-plated posts for reliable solder termination. The product is currently active and widely used in applications requiring standard rectangular connector interfaces.

Substitute parts are identified when equivalent connectors share the same critical functional parameters: connector type, contact configuration, pitch, mounting method, and termination style. Alternative sources may be necessary due to inventory availability, lead time requirements, or supply chain considerations.

Substiute Parts

SS-114-T-2

Samtec Inc.In Stock: 1126SS-114-T-2 Datasheet

Current PartRFQ

310-93-114-41-001000

Mill-Max Manufacturing Corp.In Stock: 1520310-93-114-41-001000 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the SS-114-T-2 is determined by strict equivalence across the following parameters:

• Connector type must be receptacle
• Contact configuration must be 14-position female socket
• Mating pitch must be 0.100" (2.54mm)
• Mounting method must be through-hole
• Termination method must be solder
• Board-to-board style must be maintained
• Mating contact finish must be gold
• Fastening type must be push-pull

The substitute part 310-93-114-41-001000 (Mill-Max Manufacturing Corp.) meets all these criteria and is therefore classified as an equivalent substitute.

Parameter Comparison

Engineering Selection Recommendations

Both the SS-114-T-2 and 310-93-114-41-001000 are active products with equivalent functional specifications for board-to-board rectangular connector applications. Both connectors maintain compliance with ROHS3 and REACH requirements, with unlimited moisture sensitivity ratings suitable for standard industrial and commercial environments.

The primary differences between these parts are minor variations in insulation height (0.100" versus 0.110") and post contact finish composition (tin versus tin-lead). These differences do not affect functional equivalence for standard connector applications where the mating pitch, contact count, and termination method are the determining factors.

Selection between these two parts should be based on inventory availability, lead time, and supply chain requirements rather than technical performance differences.

Frequently Asked Questions (FAQ)

Q: Can the 310-93-114-41-001000 be used as a direct replacement for the SS-114-T-2?

A: Yes. Both connectors share identical specifications for connector type, contact configuration, pitch, mounting method, and termination. The 0.010" difference in insulation height does not affect functional compatibility in standard board-to-board applications.

Q: What are the critical parameters that define substitution eligibility?

A: Substitution eligibility is determined by: 14-position receptacle configuration, female socket contacts, 0.100" (2.54mm) mating pitch, through-hole mounting, solder termination, gold mating contact finish, and push-pull fastening. Any deviation from these parameters disqualifies a part as an equivalent substitute.

Q: Are there compliance differences between these two parts?

A: No. Both parts are ROHS3 compliant, REACH unaffected, and classified as EAR99 for export control purposes. Both maintain unlimited moisture sensitivity ratings.

Q: Does the tin-lead post finish on the Mill-Max part affect compatibility?

A: No. The post contact finish does not affect mating compatibility. Both tin and tin-lead finishes are suitable for solder termination in standard PCB assembly processes.

Q: What is the significance of the insulation height difference?

A: The 0.010" difference in insulation height (0.100" versus 0.110") is a minor dimensional variation that does not affect functional performance or mechanical compatibility in standard board-to-board connector applications.