SS-102-G-22-N Equivalent & Substitute Parts

Part Overview

The SS-102-G-22-N is a 2-position receptacle connector manufactured by Samtec Inc., designed for board-to-board applications with 0.100" (2.54mm) pitch through-hole mounting. This connector features gold-plated contacts, solder termination, and push-pull fastening. The part is currently active in production with 821 units in stock. Alternative models become necessary when specific insulation material requirements, contact material specifications, or series compatibility differ from the primary specification.

Substiute Parts

SS-102-G-22-N

Samtec Inc.In Stock: 835SS-102-G-22-N Datasheet

Current PartRFQ

HSS-102-G-2

Samtec Inc.In Stock: 1781HSS-102-G-2 Datasheet

SimilarRFQ

SS-102-G-2

Samtec Inc.In Stock: 1623SS-102-G-2 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the SS-102-G-22-N is determined by the following critical parameters: connector type (receptacle), contact type (female socket), number of positions (2), mating pitch (0.100"), mounting type (through hole), termination method (solder), contact finish (gold), and operating temperature range (-55°C ~ 125°C). Parts meeting all these criteria are classified as direct substitutes. Secondary variations in insulation material (PBT glass-filled versus liquid crystal polymer) and contact material composition (beryllium copper versus beryllium copper with brass) do not disqualify substitution when all primary parameters align.

Parameter Comparison

Engineering Selection Recommendations

Both SS-102-G-2 and HSS-102-G-2 are valid substitutes for SS-102-G-22-N based on alignment of all critical electrical and mechanical parameters. SS-102-G-2 maintains identical insulation material (PBT, glass-filled) and contact material (beryllium copper) specifications, providing the closest functional equivalence. HSS-102-G-2 differs in insulation material (liquid crystal polymer) and contact material composition (beryllium copper with brass), but retains all primary connector specifications and compliance certifications. Selection between substitutes should be based on application-specific requirements for insulation material properties and contact material performance. All three parts are ROHS3 compliant and carry active product status.

Frequently Asked Questions (FAQ)

Q: Can SS-102-G-2 be used as a direct replacement for SS-102-G-22-N? A: Yes. SS-102-G-2 meets all critical substitution parameters: 2-position receptacle, 0.100" pitch, through-hole solder termination, gold contact finish, and -55°C to 125°C operating range. Material specifications are identical.

Q: What is the difference between SS-102-G-2 and HSS-102-G-2? A: The primary differences are insulation material (PBT glass-filled versus liquid crystal polymer) and contact material composition (beryllium copper versus beryllium copper with brass). Both maintain identical connector type, pitch, mounting, and termination specifications.

Q: Are all three parts ROHS3 compliant? A: Yes. SS-102-G-22-N, SS-102-G-2, and HSS-102-G-2 are all ROHS3 compliant.

Q: Does insulation material affect connector compatibility? A: Insulation material does not affect mechanical or electrical compatibility between these parts. Material selection depends on application requirements for thermal stability, chemical resistance, or specific environmental conditions.

Q: What inventory levels are available for each part? A: SS-102-G-22-N has 821 units in stock, SS-102-G-2 has 1566 units, and HSS-102-G-2 has 1720 units available.

Q: Can these connectors be used interchangeably in the same circuit board design? A: Yes, all three parts share identical mating pitch, contact configuration, mounting type, and termination method, enabling direct board-level interchangeability.