SQLEDS1-6-26 LED Spacer T-1 Equivalent & Substitute Parts

Part Overview

The SQLEDS1-6-26 is a T-1 LED spacer manufactured by Essentra Components, designed as a black PVC standoff with a 0.375" (9.53mm) length. This component is classified as Active product status and is RoHS Compliant. LED spacers are essential in electronic assemblies to maintain proper spacing and alignment of T-1 LED components during PCB mounting and soldering operations. Substitute parts may be required due to inventory availability, supply chain considerations, or specific assembly requirements.

Substiute Parts

SQLEDS1-6-26

Essentra ComponentsIn Stock: 1761SQLEDS1-6-26 Datasheet

Current PartRFQ

LEDM-2-10

Essentra ComponentsIn Stock: 8332LEDM-2-10 Datasheet

Parametric EquivalentRFQ

LEDS1-6-26

Essentra ComponentsIn Stock: 8804LEDS1-6-26 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the SQLEDS1-6-26 are determined by the following critical parameters:

• LED Type: T1 form factor (all substitutes maintain T1 compatibility)
• Color: Black (all substitutes are black)
• Material: PVC construction (all substitutes use PVC)
• Length: 0.375" (9.53mm) nominal dimension (primary substitutes match this specification)
• Compliance: RoHS Compliant status (all substitutes maintain compliance)

The substitute parts listed below meet these core electrical and mechanical requirements and are classified as parametric equivalents within the Richco LED spacer product family.

Parameter Comparison

Engineering Selection Recommendations

All listed substitute parts maintain Active product status and RoHS Compliance, ensuring continued availability and regulatory conformance. Selection between SQLEDS1-6-26, LEDM-2-10, and LEDS1-6-26 should be based on the specific length requirement for your assembly:

• SQLEDS1-6-26 and LEDS1-6-26 both provide 0.375" (9.53mm) length and are direct dimensional matches. LEDS1-6-26 incorporates flexible PVC material, which may provide additional compliance in applications requiring slight deflection.

• LEDM-2-10 provides 0.393" (10.00mm) length, representing a 0.018" (0.47mm) increase. This part is suitable only when the additional height does not conflict with PCB layout or component clearance requirements.

All parts are manufactured by Essentra Components and are available in bulk packaging.

Frequently Asked Questions (FAQ)

Q: Can LEDM-2-10 be used as a direct replacement for SQLEDS1-6-26?

A: LEDM-2-10 is a parametric equivalent within the T1 LED spacer category but differs in length (0.393" vs. 0.375"). It is suitable only if the additional 0.018" height does not violate PCB design constraints or component clearance specifications.

Q: What is the difference between LEDS1-6-26 and SQLEDS1-6-26?

A: Both parts share identical length (0.375") and LED type (T1) specifications. LEDS1-6-26 uses flexible PVC material, while SQLEDS1-6-26 uses standard PVC. Material selection depends on assembly requirements for deflection or stress relief.

Q: Are all substitute parts RoHS Compliant?

A: Yes. SQLEDS1-6-26, LEDM-2-10, and LEDS1-6-26 are all RoHS Compliant and maintain REACH Unaffected status.

Q: What packaging format is available for these parts?

A: All listed parts are supplied in bulk packaging format.

Q: Can these parts be used interchangeably in all T1 LED applications?

A: Interchangeability is determined by length tolerance requirements. Parts with matching 0.375" length (SQLEDS1-6-26 and LEDS1-6-26) are directly interchangeable. LEDM-2-10 requires verification that the 0.393" length is compatible with your specific assembly design.