Equivalent & Substitute Parts for SPU01M-05

Part Overview

The SPU01M-05 is an isolated module DC-DC converter from MEAN WELL USA Inc. It provides a regulated 5V output at up to 200mA with a 1W maximum output power. Designed for ITE (commercial) applications, this module supports a wide input range of 10.8V to 13.2V with 1.5 kV isolation, SCP (short-circuit protection), and through-hole mounting in a 6-SIP package. The product is active and RoHS3 compliant. Identifying alternative models with equivalent electrical and mechanical characteristics is necessary for supply chain flexibility, component availability, or design-in scenarios.

Substiute Parts

SPU01M-05

MEAN WELL USA Inc.In Stock: 1169SPU01M-05 Datasheet

Current PartRFQ

RBM-1205S

Recom PowerIn Stock: 2434RBM-1205S Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the SPU01M-05 are grouped strictly based on the following key parameters:

• Output voltage (5V)
• Output current capability (200mA)
• Number of outputs (1)
• Input voltage range (10.8V - 13.2V)
• Power rating (1W)
• Isolation voltage (minimum 1.5kV)
• Mounting type (Through Hole)
• Package/case (6-SIP Module, 5 Leads)
• Product status (Active)
• Compliance (RoHS3) Parts listed as substitutes match all essential electrical, mechanical, and compliance criteria detailed above.

Parameter Comparison

Engineering Selection Recommendations

Both SPU01M-05 and RBM-1205S are active, RoHS3 compliant, and meet REACH requirements. Their MSL is rated at 1 (Unlimited). Selection between these parts can be based on product status and environmental compliance, according to the provided data. No additional technical considerations are introduced beyond product compliance and status information.

Frequently Asked Questions (FAQ)

Q1: What key parameters determine whether RBM-1205S can substitute SPU01M-05?
A1: Output voltage, output current, input voltage range, power rating, isolation voltage, number of outputs, mounting type, package, product status, and compliance status must all match the requirements for substitution.

Q2: Are there any package or pinout differences between SPU01M-05 and RBM-1205S?
A2: Both converters use a 6-SIP Module, 5 Leads package for through-hole mounting based on provided data.

Q3: What should be considered regarding compliance when substituting these DC-DC converters?
A3: Both SPU01M-05 and RBM-1205S are RoHS3 compliant, have MSL 1 (Unlimited), and are REACH unaffected.

Q4: Can the RBM-1205S be used in the same applications as the SPU01M-05?
A4: Both parts are suitable for ITE (Commercial) applications and have matching electrical and mechanical characteristics according to provided data.

Q5: Is the operating temperature range a limitation for substitution?
A5: The operating temperature range differs slightly, with SPU01M-05 specified up to 90°C (with derating) and RBM-1205S up to 85°C. This is the only operational difference based on provided input.