SPP80P06PBKSA1 Equivalent & Substitute Parts

Part Overview

The SPP80P06PBKSA1 is a P-Channel MOSFET manufactured by Infineon Technologies, rated for 60V drain-to-source voltage and 80A continuous drain current at 25°C. This device is housed in a TO-220-3 through-hole package and is part of the SIPMOS® series. The part is currently classified as obsolete, making identification of equivalent and substitute components essential for ongoing design support, maintenance, and production continuity.

Key Parameters

Parameter	Value	Unit
FET Type	P-Channel	—
Drain to Source Voltage (Vdss)	60	V
Current - Continuous Drain (Id) @ 25°C	80	A (Tc)
Rds On (Max) @ Id, Vgs	23	mOhm @ 64A, 10V
Power Dissipation (Max)	340	W (Tc)
Operating Temperature Range	-55 to 175	°C (TJ)
Package / Case	TO-220-3	—
Mounting Type	Through Hole	—

Substitute Part Grouping Explanation

Substitution of the SPP80P06PBKSA1 is determined by strict equivalence across the following electrical and mechanical parameters:

Critical Substitution Criteria:

FET Type: P-Channel configuration
Drain to Source Voltage (Vdss): 60V minimum rating
Continuous Drain Current (Id): 80A at 25°C
On-State Resistance (Rds On): 23 mOhm maximum at specified conditions
Power Dissipation: 340W (Tc) capability
Operating Temperature Range: -55°C to 175°C (TJ)
Package: TO-220-3 through-hole configuration
Manufacturer: Infineon Technologies SIPMOS® series

The SPP80P06PHXKSA1 meets all electrical specifications and mechanical requirements. The primary distinction is product status and packaging format, with the substitute part classified as active and supplied in tube packaging, compared to the obsolete status of the original part.

Parameter Comparison

Parameter	SPP80P06PBKSA1	SPP80P06PHXKSA1	Match
Manufacturer	Infineon Technologies	Infineon Technologies	✓
Series	SIPMOS®	SIPMOS®	✓
FET Type	P-Channel	P-Channel	✓
Technology	MOSFET (Metal Oxide)	MOSFET (Metal Oxide)	✓
Drain to Source Voltage (Vdss)	60 V	60 V	✓
Current - Continuous Drain (Id) @ 25°C	80A (Tc)	80A (Tc)	✓
Drive Voltage (Max Rds On)	10V	10V	✓
Rds On (Max) @ Id, Vgs	23 mOhm @ 64A, 10V	23 mOhm @ 64A, 10V	✓
Vgs(th) (Max) @ Id	4V @ 5.5mA	4V @ 5.5mA	✓
Gate Charge (Qg) (Max) @ Vgs	173 nC @ 10 V	173 nC @ 10 V	✓
Vgs (Max)	±20V	±20V	✓
Input Capacitance (Ciss) (Max) @ Vds	5033 pF @ 25 V	5033 pF @ 25 V	✓
Power Dissipation (Max)	340W (Tc)	340W (Tc)	✓
Operating Temperature	-55°C ~ 175°C (TJ)	-55°C ~ 175°C (TJ)	✓
Package / Case	TO-220-3	TO-220-3	✓
Mounting Type	Through Hole	Through Hole	✓
Product Status	Obsolete	Active	—
Packaging Format	Standard	Tube	—
RoHS Status	Not specified	ROHS3 Compliant	—

Engineering Selection Recommendations

The SPP80P06PHXKSA1 is the direct equivalent substitute for the obsolete SPP80P06PBKSA1. All electrical parameters, thermal characteristics, and mechanical specifications are identical. The substitute part is manufactured by the same supplier (Infineon Technologies) within the same SIPMOS® product family.

Selection Basis:

Product Status: The SPP80P06PHXKSA1 is classified as active, ensuring long-term availability and continued manufacturing support, whereas the original part is obsolete.
Compliance: The substitute part carries ROHS3 compliance certification, meeting current environmental and regulatory requirements for electronic components.
Electrical Equivalence: All critical electrical parameters—voltage rating, current capacity, on-state resistance, gate charge, and thermal dissipation—are identical between the two parts.
Mechanical Compatibility: Both parts use the TO-220-3 through-hole package, ensuring direct pin-compatible installation on existing printed circuit boards without layout modifications.
Packaging Availability: The substitute is supplied in tube packaging format, which is standard for active production components and facilitates automated assembly processes.

Frequently Asked Questions (FAQ)

Q: Can SPP80P06PHXKSA1 be used as a direct replacement for SPP80P06PBKSA1 in existing designs?

A: Yes. The SPP80P06PHXKSA1 is electrically and mechanically equivalent. All electrical specifications, thermal ratings, and package dimensions are identical. The TO-220-3 through-hole footprint is the same, allowing direct substitution without circuit board redesign.

Q: What is the primary reason for substitution?

A: The SPP80P06PBKSA1 is classified as obsolete. The SPP80P06PHXKSA1 is the active equivalent from the same manufacturer and product series, ensuring continued component availability and manufacturing support.

Q: Are there differences in packaging that affect assembly?

A: The original part uses standard packaging, while the substitute is supplied in tube format. Tube packaging is standard for active production components and is compatible with automated pick-and-place assembly equipment. No functional or performance differences result from this packaging distinction.

Q: Does the substitute part meet current environmental standards?

A: Yes. The SPP80P06PHXKSA1 carries ROHS3 compliance certification, meeting current environmental and regulatory requirements. The original part's compliance status was not specified in available documentation.

Q: Are the electrical characteristics identical?

A: Yes. Both parts share identical specifications for drain-to-source voltage (60V), continuous drain current (80A at 25°C), on-state resistance (23 mOhm), power dissipation (340W), and operating temperature range (-55°C to 175°C). All gate-level parameters, including threshold voltage, gate charge, and input capacitance, are also identical.

Q: Can these parts be used interchangeably in high-reliability applications?

A: Yes, provided the substitute part's active status and ROHS3 compliance meet application requirements. Both parts are manufactured by Infineon Technologies within the SIPMOS® series and share identical electrical and thermal characteristics. Verification of compliance requirements specific to the application is recommended.

Q: What is the inventory status of each part?

A: The SPP80P06PBKSA1 has 1,142 pieces in stock (obsolete status). The SPP80P06PHXKSA1 has 4,300 pieces in stock (active status), providing greater availability for new orders and ongoing production requirements.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message