SPD09P06PL P-Channel MOSFET 60V 9.7A Equivalent & Substitute Parts

Part Overview

The SPD09P06PL is a P-Channel MOSFET manufactured by Infineon Technologies, rated for 60V drain-to-source voltage with 9.7A continuous drain current at 25°C. The device is housed in a TO-252-3 (DPAK) surface mount package and dissipates up to 42W at the case temperature. This part is discontinued at DiGi Electronics, making equivalent and substitute parts necessary for ongoing design support and procurement.

Substiute Parts

SPD09P06PL

Infineon TechnologiesIn Stock: 3806SPD09P06PL Datasheet

Current PartRFQ

SPD09P06PLGBTMA1

Infineon TechnologiesIn Stock: 17398SPD09P06PLGBTMA1 Datasheet

Parametric EquivalentRFQ

NTD2955T4G

onsemiIn Stock: 81676NTD2955T4G Datasheet

MFR RecommendedRFQ

SIHFR9024TR-GE3

Vishay SiliconixIn Stock: 2743SIHFR9024TR-GE3 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the SPD09P06PL is determined by the following critical parameters:

Electrical Compatibility Requirements:

• FET Type: P-Channel (mandatory match)
• Drain to Source Voltage (Vdss): 60V minimum
• Continuous Drain Current (Id): 9.7A or greater at 25°C
• Rds On (Max): 250 mOhm or lower at specified gate voltage
• Power Dissipation: 42W or greater
• Gate Voltage Range (Vgs): ±20V
• Operating Temperature: -55°C to 175°C or wider

Mechanical Compatibility Requirements:

• Package / Case: TO-252-3 (DPAK) surface mount
• Mounting Type: Surface Mount

Compliance Requirements:

• RoHS3 Compliant
• Moisture Sensitivity Level (MSL): 1 (Unlimited)

Substitute parts are grouped into two categories: parametric equivalents (identical electrical and mechanical specifications) and manufacturer-recommended alternatives (superior or equivalent performance within the same package family).

Parameter Comparison

Engineering Selection Recommendations

SPD09P06PLGBTMA1 (Parametric Equivalent - Infineon Technologies)

This part is the direct parametric equivalent to the SPD09P06PL. It maintains identical electrical specifications (60V, 9.7A, 250 mOhm Rds On, 42W dissipation) and mechanical packaging (TO-252-3 DPAK). The primary distinction is product status: SPD09P06PLGBTMA1 is Active with 17,349 units in stock, compared to the discontinued SPD09P06PL. This substitute is suitable for direct replacement in all applications where the original part was specified. Packaging differs only in format (Tape & Reel vs. standard packaging), which does not affect electrical or mechanical compatibility.

NTD2955T4G (onsemi)

This manufacturer-recommended alternative offers superior continuous drain current (12A vs. 9.7A) and lower Rds On (180 mOhm vs. 250 mOhm), resulting in improved thermal performance (55W vs. 42W dissipation). The part maintains 60V Vdss rating and -55°C to 175°C operating temperature range. NTD2955T4G is suitable for applications requiring higher current capacity or lower on-resistance within the same voltage class and package footprint. High inventory availability (81,600 units) supports production requirements.

SIHFR9024TR-GE3 (Vishay Siliconix)

This manufacturer-recommended alternative provides equivalent 60V Vdss rating and 42W power dissipation matching the original SPD09P06PL. Continuous drain current is 8.8A (slightly lower than 9.7A), and Rds On is 280 mOhm (higher than 250 mOhm). Operating temperature range is -55°C to 150°C, which is 25°C narrower than the original part. This substitute is suitable for applications where the original SPD09P06PL specifications are not fully utilized or where the reduced upper temperature limit is acceptable. Inventory availability is 2,700 units.

All three substitute parts are ROHS3 compliant, MSL 1 (Unlimited), and housed in TO-252-3 (DPAK) surface mount packages compatible with the original design footprint.

Frequently Asked Questions (FAQ)

Q: Can SPD09P06PLGBTMA1 be used as a direct replacement for SPD09P06PL?

A: Yes. SPD09P06PLGBTMA1 is a parametric equivalent with identical electrical and mechanical specifications. The only difference is packaging format (Tape & Reel) and active product status. Pin configuration, electrical performance, and thermal characteristics are identical.

Q: What is the primary advantage of NTD2955T4G over the original SPD09P06PL?

A: NTD2955T4G offers higher continuous drain current (12A vs. 9.7A) and lower on-resistance (180 mOhm vs. 250 mOhm). These improvements result in reduced power dissipation and improved thermal performance (55W vs. 42W). The part maintains the same 60V voltage rating and operating temperature range.

Q: Is SIHFR9024TR-GE3 suitable for all applications using SPD09P06PL?

A: SIHFR9024TR-GE3 is suitable for applications where the original specifications are not fully utilized. The part has lower continuous drain current (8.8A vs. 9.7A), higher on-resistance (280 mOhm vs. 250 mOhm), and a narrower operating temperature range (-55°C to 150°C vs. -55°C to 175°C). Applications requiring the full 9.7A current or operation above 150°C should use SPD09P06PLGBTMA1 or NTD2955T4G.

Q: Are all substitute parts in the same package?

A: Yes. All substitute parts use TO-252-3 (DPAK) surface mount packaging with identical pin configuration and footprint compatibility. Packaging format differences (Tape & Reel vs. Cut Tape) do not affect electrical or mechanical compatibility.

Q: What compliance certifications apply to these substitute parts?

A: All substitute parts are ROHS3 compliant, MSL 1 (Unlimited), and REACH unaffected. ECCN classification is EAR99 for all parts. These certifications match the original SPD09P06PL.

Q: Which substitute part should be selected for new designs?

A: SPD09P06PLGBTMA1 is recommended for direct replacement of discontinued SPD09P06PL designs. For new designs, NTD2955T4G offers superior performance characteristics (higher current, lower on-resistance) within the same package and voltage class. SIHFR9024TR-GE3 is suitable only when application requirements do not demand the full 9.7A current or extended temperature operation above 150°C.