Equivalent & Substitute Parts for SPD07N60C3T

Part Overview

The SPD07N60C3T by Infineon Technologies is an N-channel MOSFET with a Drain to Source Voltage (Vdss) of 650V and a continuous drain current (Id) of 7.3A (Tc). It is designed for surface-mount applications using the PG-TO252-3-11 (TO-252-3, DPAK) package. With a maximum power dissipation of 83W (Tc) and low Rds(on), this device was suitable for high-efficiency switching power supplies and similar uses. The part is now discontinued at Digi-Key, making it essential to identify suitable substitute or equivalent MOSFETs that meet the electrical, thermal, and mechanical requirements for design continuity and production maintenance.

Key Parameters

Parameter	Main Value
FET Type	N-Channel
Drain to Source Voltage (Vdss)	650 V
Current - Continuous Drain (Id) @ 25°C	7.3A (Tc)
Rds On (Max) @ Id, Vgs	600mOhm @ 4.6A, 10V
Vgs(th) (Max) @ Id	3.9V @ 350µA
Gate Charge (Qg) (Max) @ Vgs	27 nC @ 10 V
Vgs (Max)	±20V
Input Capacitance (Ciss) (Max) @ Vds	790 pF @ 25 V
Power Dissipation (Max)	83W (Tc)
Operating Temperature	-55°C ~ 150°C (TJ)
Mounting Type	Surface Mount
Package / Case	TO-252-3, DPAK (2 Leads + Tab), SC-63
RoHS Status	ROHS3 Compliant
MSL	1 (Unlimited)
REACH Status	REACH Unaffected

Substitute Part Grouping Explanation

Substitute MOSFETs for SPD07N60C3T are identified strictly by comparing key electrical and mechanical parameters: FET type (N-Channel), Drain to Source Voltage (Vdss), continuous drain current (Id), maximum Rds(on) at specified Id and Vgs, threshold voltage (Vgs(th)), gate charge (Qg), maximum gate-source voltage (Vgs Max), input capacitance (Ciss), power dissipation (Pmax), operating temperature range, mounting type, and package compatibility. Only MOSFETs matching or closely aligning with these characteristics and sharing compliance status (ROHS3, REACH) are listed.

Parameter Comparison

Manufacturer Part Number	Manufacturer	Vdss	Id (Tc or Ta)	Rds On (Max) @ Id, Vgs	Vgs(th) (Max)	Qg (Max) @ Vgs	Vgs (Max)	Ciss (Max)	Power Dissipation (Max)	Operating Temperature	Mounting Type	Package / Case	RoHS Status	MSL	REACH Status
SPD07N60C3T	Infineon Technologies	650 V	7.3A (Tc)	600mOhm @ 4.6A, 10V	3.9V @ 350µA	27 nC @ 10 V	±20V	790 pF @ 25 V	83W (Tc)	-55°C ~ 150°C (TJ)	Surface Mount	TO-252-3, DPAK (2 Leads + Tab), SC-63	ROHS3	1	REACH Unaffected
AOD7S60	Alpha & Omega Semiconductor Inc.	600 V	7A (Tc)	600mOhm @ 3.5A, 10V	3.9V @ 250µA	8.2 nC @ 10 V	±30V	372 pF @ 100 V	83W (Tc)	-55°C ~ 150°C (TJ)	Surface Mount	TO-252-3, DPAK (2 Leads + Tab), SC-63	ROHS3	1	REACH Unaffected
STD10N60M2	STMicroelectronics	600 V	7.5A (Tc)	600mOhm @ 3A, 10V	4V @ 250µA	13.5 nC @ 10 V	±25V	400 pF @ 100 V	85W (Tc)	-55°C ~ 150°C (TJ)	Surface Mount	TO-252-3, DPAK (2 Leads + Tab), SC-63	ROHS3	1	REACH Unaffected
STD10NM60N	STMicroelectronics	600 V	10A (Tc)	550mOhm @ 4A, 10V	4V @ 250µA	19 nC @ 10 V	±25V	540 pF @ 50 V	70W (Tc)	-55°C ~ 150°C (TJ)	Surface Mount	TO-252-3, DPAK (2 Leads + Tab), SC-63	ROHS3	1	REACH Unaffected
STD13N65M2	STMicroelectronics	650 V	10A (Tc)	430mOhm @ 5A, 10V	4V @ 250µA	17 nC @ 10 V	±25V	590 pF @ 100 V	110W (Tc)	150°C (TJ)	Surface Mount	TO-252-3, DPAK (2 Leads + Tab), SC-63	ROHS3	1	REACH Unaffected
STD9NM60N	STMicroelectronics	600 V	6.5A (Tc)	745mOhm @ 3.25A, 10V	4V @ 250µA	17.4 nC @ 10 V	±25V	452 pF @ 50 V	70W (Tc)	150°C (TJ)	Surface Mount	TO-252-3, DPAK (2 Leads + Tab), SC-63	ROHS3	1	REACH Unaffected
TK7P60W,RVQ	Toshiba Semiconductor and Storage	600 V	7A (Ta)	600mOhm @ 3.5A, 10V	3.7V @ 350µA	15 nC @ 10 V	±30V	490 pF @ 300 V	60W (Tc)	150°C (TJ)	Surface Mount	TO-252-3, DPAK (2 Leads + Tab), SC-63	ROHS3	1
TSM70N600CP ROG	Taiwan Semiconductor Corporation	700 V	8A (Tc)	600mOhm @ 4A, 10V	4V @ 250µA	12.6 nC @ 10 V	±30V	743 pF @ 100 V	83W (Tc)	-55°C ~ 150°C (TJ)	Surface Mount	TO-252-3, DPAK (2 Leads + Tab), SC-63	ROHS3	3	REACH Unaffected

Engineering Selection Recommendations

All substitute MOSFET part numbers listed above are ROHS3 compliant and, where specified, REACH unaffected, meeting the compliance status of the main part, SPD07N60C3T. All alternatives offer compatible surface-mount mechanical configuration with TO-252-3, DPAK (2 Leads + Tab), SC-63 packages. Moisture Sensitivity Level (MSL) is 1 for most substitutes, matching the unlimited floor life of the original; TSM70N600CP ROG has MSL 3. Supplied alternatives are either active or not for new designs, but not all carry the “Discontinued” status.

Device selection can be based on matching or exceeding the original's voltage, current, package, and compliance status as outlined in the comparison table.

Frequently Asked Questions (FAQ)

Q1: What are the critical parameters when selecting a substitute for the SPD07N60C3T?
A1: Critical parameters include FET type (N-Channel), Drain to Source Voltage (Vdss), continuous drain current (Id), Rds(on), gate threshold voltage (Vgs(th)), gate charge (Qg), package type, power dissipation, RoHS/REACH compliance, and MSL level.

Q2: Are all listed substitutes mechanically interchangeable with SPD07N60C3T?
A2: Yes, all alternatives use the TO-252-3, DPAK (2 Leads + Tab), SC-63 surface mount package, ensuring mechanical compatibility.

Q3: How important is matching the MSL and compliance status when substituting?
A3: MSL and compliance (RoHS3, REACH) are essential for ensuring reliability during PCB assembly and meeting regulatory requirements.

Q4: Is it necessary for substituting parts to exactly match all parameters?
A4: Substitute selection is strictly based on matching key electrical, thermal, and mechanical characteristics as shown in the comparison table.

Q5: Can I use a substitute with a higher Drain to Source Voltage or Current?
A5: Allowed parameter substitutions are determined strictly by the provided comparison; some alternatives offer higher Vdss or Id within packaging and electrical compatibility.

Q6: Do the substitutes offer equivalent or better power dissipation and temperature range?
A6: Substitutes provide equal or higher power dissipation and similar temperature ranges, based solely on the provided values.

Q7: Are there any differences in compliance or packaging that affect substitutability?
A7: All listed parts meet the RoHS3 standard. MSL is mostly 1 (unlimited); TSM70N600CP ROG is MSL 3 as specified. Package form factor remains consistent across all listed substitutes.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message