SPD07N60C3 Equivalent & Substitute Parts Reference

Part Overview

The SPD07N60C3 is an N-Channel 600V MOSFET manufactured by Infineon Technologies in the CoolMOS™ series, rated for 7.3A continuous drain current at 25°C with 83W power dissipation. The device is packaged in TO-252-3 (DPAK) surface mount configuration.

This part is classified as Obsolete. Identifying equivalent and substitute parts is necessary to maintain design continuity, ensure supply chain availability, and support ongoing production requirements for applications utilizing this MOSFET topology.

Substiute Parts

SPD07N60C3

Infineon TechnologiesIn Stock: 37472SPD07N60C3 Datasheet

Current PartRFQ

STD10N60M2

STMicroelectronicsIn Stock: 28195STD10N60M2 Datasheet

MFR RecommendedRFQ

STD10NM60ND

STMicroelectronicsIn Stock: 8762STD10NM60ND Datasheet

MFR RecommendedRFQ

STD13N60M2

STMicroelectronicsIn Stock: 23432STD13N60M2 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the SPD07N60C3 is determined by the following critical parameters:

Primary Substitution Criteria:

• Drain to Source Voltage (Vdss): 600V (exact match required)
• Package Type: TO-252-3 (DPAK) surface mount (exact match required)
• FET Type: N-Channel (exact match required)
• Technology: MOSFET Metal Oxide (exact match required)
• Operating Temperature Range: -55°C to 150°C (minimum requirement)

Secondary Compatibility Parameters:

• Continuous Drain Current (Id): Equal to or greater than 7.3A
• On-State Resistance (Rds On): Equal to or less than 600 mOhm at rated conditions
• Power Dissipation: Equal to or greater than 83W
• Gate Threshold Voltage: Within acceptable switching characteristics

All three substitute parts (STD10N60M2, STD10NM60ND, STD13N60M2) meet the primary substitution criteria. They are manufactured by STMicroelectronics, maintain identical voltage and package specifications, and operate within the required temperature range. Each substitute represents an active product status with current manufacturing availability.

Parameter Comparison

Engineering Selection Recommendations

STD10N60M2 Selection: STD10N60M2 provides the closest electrical match to SPD07N60C3 with 7.5A continuous drain current and 600 mOhm on-state resistance. This substitute maintains equivalent voltage and thermal specifications while offering ROHS3 compliance and active product status. Inventory availability is 28,109 pieces. This part is suitable for direct replacement in applications where the original SPD07N60C3 specifications are maintained.

STD10NM60ND Selection: STD10NM60ND offers 8A continuous drain current with identical 600 mOhm on-state resistance characteristics. This substitute provides slightly higher current capability and lower power dissipation (70W vs. 83W). ROHS3 compliance and active status are confirmed. Inventory availability is 8,680 pieces. This part is suitable for applications requiring marginally higher current handling with reduced thermal load.

STD13N60M2 Selection: STD13N60M2 represents a higher-performance alternative with 11A continuous drain current and superior on-state resistance of 380 mOhm at 5.5A. Power dissipation capability is 110W. This substitute is appropriate for applications where increased current capacity and improved efficiency are beneficial. ROHS3 compliance and active status are confirmed. Inventory availability is 23,329 pieces.

All three substitutes maintain identical voltage ratings (600V Vdss), package configuration (TO-252-3 DPAK), operating temperature range (-55°C to 150°C), and regulatory compliance (REACH Unaffected, ROHS3 Compliant). Selection should be based on specific application current requirements and thermal management considerations.

Frequently Asked Questions (FAQ)

Q: Can STD10N60M2, STD10NM60ND, or STD13N60M2 be used as direct replacements for SPD07N60C3?

A: Yes. All three substitute parts meet the primary substitution criteria: identical 600V Vdss rating, TO-252-3 DPAK package configuration, N-Channel MOSFET technology, and -55°C to 150°C operating temperature range. Electrical performance is compatible with or exceeds the original SPD07N60C3 specifications.

Q: What are the key differences between the three substitute options?

A: The primary differences are continuous drain current ratings and on-state resistance characteristics. STD10N60M2 provides 7.5A at 600 mOhm, STD10NM60ND provides 8A at 600 mOhm, and STD13N60M2 provides 11A at 380 mOhm. Power dissipation ratings are 85W, 70W, and 110W respectively. Selection depends on application current requirements.

Q: Are all substitute parts currently in production?

A: Yes. All three substitute parts (STD10N60M2, STD10NM60ND, STD13N60M2) have Active product status, indicating current manufacturing and availability. The original SPD07N60C3 is classified as Obsolete.

Q: Do the substitute parts have the same package footprint as SPD07N60C3?

A: Yes. All substitute parts use the TO-252-3 (DPAK) surface mount package with identical lead configuration and PCB footprint compatibility.

Q: Are there regulatory compliance differences between the original and substitute parts?

A: The substitute parts offer enhanced compliance. All three substitutes are ROHS3 Compliant, while the original SPD07N60C3 compliance status is not specified. All parts maintain REACH Unaffected status.

Q: Which substitute part should be selected for a direct replacement application?

A: STD10N60M2 is recommended for direct replacement applications where the original SPD07N60C3 specifications must be maintained. It provides the closest electrical match with 7.5A continuous current and 600 mOhm on-state resistance.

Q: Can STD13N60M2 be used in place of SPD07N60C3 if the application allows higher current capability?

A: Yes. STD13N60M2 is electrically compatible and offers superior performance with 11A continuous current and lower on-state resistance (380 mOhm). This substitute is suitable for applications where increased current capacity and improved efficiency provide design benefits.

Q: What is the gate charge difference between SPD07N60C3 and the substitute parts?

A: SPD07N60C3 has 27 nC gate charge at 10V. Substitute parts have lower gate charge: STD10N60M2 (13.5 nC), STD10NM60ND (20 nC), and STD13N60M2 (17 nC). Lower gate charge improves switching speed and reduces driver power requirements.