SPC5607BAMLU6 Equivalent & Substitute Parts

Part Overview

The SPC5607BAMLU6 is an e200z0h MPC56xx Qorivva 32-bit single-core microcontroller IC operating at 64MHz with 1.5MB FLASH memory, designed for embedded automotive and industrial applications requiring CANbus, I2C, LINbus, SCI, and SPI connectivity. The device is currently in active production status. Identifying equivalent substitute parts ensures design flexibility, supply chain continuity, and procurement optimization when the primary part number becomes unavailable or when alternative packaging configurations are required.

Substiute Parts

SPC5607BAMLU6

NXP USA Inc.In Stock: 3482SPC5607BAMLU6 Datasheet

Current PartRFQ

SPC5607BK0MLU6

NXP USA Inc.In Stock: 2895SPC5607BK0MLU6 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the SPC5607BAMLU6 are determined by strict equivalence across all critical electrical and mechanical parameters. The substitution logic is based on the following criteria:

Core Substitution Parameters:

• Identical core processor (e200z0h)
• Identical core architecture (32-Bit Single-Core)
• Identical operating frequency (64MHz)
• Identical program memory configuration (1.5MB FLASH)
• Identical EEPROM capacity (64K x 8)
• Identical RAM capacity (96K x 8)
• Identical I/O count (149 pins)
• Identical package type (176-LQFP 24x24)
• Identical voltage supply range (3V ~ 5.5V)
• Identical connectivity interfaces (CANbus, I2C, LINbus, SCI, SPI)
• Identical peripheral set (DMA, POR, PWM, WDT)
• Identical data converter specifications (A/D 29x10b, 5x12b)
• Identical operating temperature range (-40°C ~ 125°C)
• Identical compliance certifications (ROHS3, REACH Unaffected)

Variations in packaging configuration (tray vs. tube) do not affect electrical or functional equivalence and are considered acceptable substitutions for component selection purposes.

Parameter Comparison

Engineering Selection Recommendations

The SPC5607BK0MLU6 is a direct parametric equivalent to the SPC5607BAMLU6. Both parts are manufactured by NXP USA Inc., maintain active production status, and carry identical electrical specifications, memory configurations, I/O counts, and compliance certifications. The sole difference between these part numbers is the packaging configuration: the SPC5607BAMLU6 is supplied in tube packaging, while the SPC5607BK0MLU6 is supplied in tray packaging.

From an engineering perspective, either part number is suitable for component selection in applications requiring the MPC56xx Qorivva microcontroller platform. Selection between these equivalents should be based on procurement requirements, inventory management practices, and supply chain logistics rather than technical performance considerations. Both parts satisfy identical functional and environmental requirements for embedded automotive and industrial applications operating within the specified temperature and voltage ranges.

Frequently Asked Questions (FAQ)

Q: Are SPC5607BAMLU6 and SPC5607BK0MLU6 electrically identical?

A: Yes. Both parts contain the identical e200z0h core processor, operate at 64MHz, and provide 1.5MB FLASH, 64K EEPROM, and 96K RAM. All electrical specifications, I/O configurations, connectivity interfaces, and peripheral sets are identical.

Q: What is the difference between these part numbers?

A: The difference is packaging configuration only. SPC5607BAMLU6 is supplied in tube packaging, while SPC5607BK0MLU6 is supplied in tray packaging. This distinction affects logistics and inventory handling but does not impact component functionality or performance.

Q: Can I use SPC5607BK0MLU6 as a direct replacement for SPC5607BAMLU6 on a PCB?

A: Yes. Both parts use the identical 176-LQFP (24x24) package with 149 I/O pins. PCB footprints, pin assignments, and electrical connections are identical. No design modifications are required.

Q: Do both parts meet the same compliance standards?

A: Yes. Both SPC5607BAMLU6 and SPC5607BK0MLU6 are ROHS3 compliant, REACH unaffected, and carry identical moisture sensitivity levels (MSL 3, 168 hours). Compliance certifications are equivalent.

Q: What operating conditions do these microcontrollers support?

A: Both parts operate across -40°C to 125°C ambient temperature range and accept supply voltages from 3V to 5.5V. They support CANbus, I2C, LINbus, SCI, and SPI connectivity for automotive and industrial embedded applications.

Q: Are there any functional differences in memory or I/O between these parts?

A: No. Both parts provide identical memory architecture: 1.5MB FLASH program memory, 64K EEPROM, and 96K RAM. Both provide 149 I/O pins and identical peripheral support (DMA, POR, PWM, WDT).