SPC5604CF2MLL6 Equivalent & Substitute Parts

Part Overview

The SPC5604CF2MLL6 is an e200z0h MPC56xx Qorivva 32-bit single-core microcontroller IC manufactured by NXP USA Inc. This embedded processor operates at 64MHz with 512KB FLASH program memory and is housed in a 100-LQFP (14x14) surface mount package. The device is currently in active product status and maintains full ROHS3 compliance. Substitute parts are identified when identical electrical specifications and mechanical compatibility are maintained across the same product family, enabling seamless integration in existing designs.

Substiute Parts

SPC5604CF2MLL6

NXP USA Inc.In Stock: 2191SPC5604CF2MLL6 Datasheet

Current PartRFQ

SPC5604CF2MLH6

NXP USA Inc.In Stock: 3175SPC5604CF2MLH6 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the SPC5604CF2MLL6 is determined by strict equivalence across the following critical parameters:

• Core processor architecture (e200z0h)
• Core configuration (32-Bit Single-Core)
• Operating frequency (64MHz)
• Program memory capacity and type (512KB FLASH)
• EEPROM and RAM specifications (64K x 8 and 48K x 8 respectively)
• I/O count (79 pins)
• Supply voltage range (3V ~ 5.5V)
• Connectivity interfaces (CANbus, I2C, LINbus, SCI, SPI)
• Peripheral set (DMA, POR, PWM, WDT)
• Data converter specifications (A/D 28x10b)
• Package type and pin count (100-LQFP 14x14)
• Operating temperature range (-40°C ~ 125°C)
• Compliance certifications (ROHS3, REACH Unaffected)

The SPC5604CF2MLH6 qualifies as a parametric equivalent substitute. The only difference between these parts is the packaging format: the main part uses standard packaging while the substitute uses tray packaging. This distinction affects only the delivery and handling method, not the electrical or mechanical functionality of the device.

Parameter Comparison

Engineering Selection Recommendations

Both the SPC5604CF2MLL6 and SPC5604CF2MLH6 are active products from NXP USA Inc. with identical electrical and mechanical specifications. Selection between these parts should be based on packaging and supply chain requirements:

The SPC5604CF2MLL6 is suitable for applications requiring standard packaging format. The SPC5604CF2MLH6 is suitable for applications where tray packaging is preferred for handling, storage, or logistics purposes.

Both parts maintain ROHS3 compliance and REACH unaffected status, ensuring regulatory alignment for industrial and automotive applications. Both parts carry Moisture Sensitivity Level 3 (168 Hours), requiring appropriate handling during storage and assembly.

Frequently Asked Questions (FAQ)

Q: Can SPC5604CF2MLH6 be used as a direct replacement for SPC5604CF2MLL6?

A: Yes. The SPC5604CF2MLH6 is a parametric equivalent substitute. All electrical specifications, memory configurations, I/O counts, connectivity interfaces, and operating parameters are identical. The only difference is the packaging format (tray versus standard). No circuit design changes or firmware modifications are required.

Q: What is the difference between the packaging formats?

A: The SPC5604CF2MLL6 uses standard packaging while the SPC5604CF2MLH6 uses tray packaging. This affects only the physical delivery method and handling procedures. The actual microcontroller die, pin configuration, and electrical performance are identical.

Q: Are both parts suitable for automotive applications?

A: Both parts are active products with identical specifications and compliance certifications. Selection for automotive applications should be based on specific design requirements and supply chain preferences. Both maintain ROHS3 compliance and REACH unaffected status.

Q: What is the Moisture Sensitivity Level (MSL) for these parts?

A: Both parts carry MSL 3 (168 Hours). This indicates the maximum time the component can be exposed to moisture at specified temperature and humidity conditions before soldering. Proper handling and storage procedures must be followed to maintain component integrity.

Q: Can inventory availability influence the selection between these parts?

A: Yes. The SPC5604CF2MLL6 has 2170 pieces in stock while the SPC5604CF2MLH6 has 3140 pieces in stock. Availability may influence procurement decisions based on project timelines and volume requirements.