SPC5604BK0MLH4 Equivalent & Substitute Parts

Part Overview

The SPC5604BK0MLH4 is an e200z0h MPC56xx Qorivva 32-bit single-core microcontroller manufactured by NXP USA Inc. This embedded IC features 512KB FLASH memory, 64KB EEPROM, and 32KB RAM in a 64-LQFP surface mount package. The device operates at 48MHz with integrated connectivity options including CANbus, I2C, LINbus, SCI, and SPI interfaces. Currently in active product status with 605 units available in stock, this microcontroller serves applications requiring automotive-grade embedded processing with comprehensive peripheral support.

Identifying equivalent substitute parts is necessary when primary part availability is limited, supply chain optimization is required, or inventory management necessitates alternative sourcing while maintaining identical electrical and mechanical specifications.

Substiute Parts

SPC5604BK0MLH4

NXP USA Inc.In Stock: 685SPC5604BK0MLH4 Datasheet

Current PartRFQ

SPC5604BF2MLH4

NXP USA Inc.In Stock: 16386SPC5604BF2MLH4 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the SPC5604BK0MLH4 is determined by strict equivalence across all electrical and mechanical parameters. The substitute part SPC5604BF2MLH4 qualifies as a parametric equivalent based on identical specifications in the following critical categories:

Processor Architecture: Both parts utilize the e200z0h core processor with 32-bit single-core configuration operating at 48MHz.

Memory Configuration: Identical program memory (512KB FLASH), EEPROM (64K x 8), and RAM (32K x 8) specifications.

Electrical Characteristics: Matching voltage supply range (3V ~ 5.5V), data converter specifications (A/D 12x10b), and I/O count (45 pins).

Connectivity & Peripherals: Identical CANbus, I2C, LINbus, SCI, and SPI interfaces with matching DMA, POR, PWM, and WDT peripherals.

Physical Package: Both parts are housed in 64-LQFP (10x10) surface mount packages with identical thermal and mechanical specifications.

Compliance & Certification: Both parts maintain ROHS3 compliance, identical MSL rating (3, 168 Hours), and REACH unaffected status.

Parameter Comparison

Engineering Selection Recommendations

Both the SPC5604BK0MLH4 and SPC5604BF2MLH4 are active products from NXP USA Inc. with full ROHS3 compliance and REACH unaffected status. Selection between these parts should be based on inventory availability and supply chain requirements, as all electrical, mechanical, and compliance specifications are identical.

The SPC5604BF2MLH4 currently maintains higher inventory levels (16,300 units) compared to the SPC5604BK0MLH4 (605 units), making it suitable for applications requiring extended lead time assurance or volume procurement. Both parts are suitable for direct substitution in existing designs without circuit modification or re-qualification.

Frequently Asked Questions (FAQ)

Q: Can SPC5604BF2MLH4 be used as a direct replacement for SPC5604BK0MLH4?

A: Yes. Both parts are parametric equivalents with identical electrical specifications, memory configuration, connectivity interfaces, peripheral support, and 64-LQFP package dimensions. No circuit modifications are required.

Q: Are there any differences in operating temperature ranges?

A: No. Both parts operate across the identical temperature range of -40°C to 125°C (TA).

Q: Do both parts have the same pin configuration?

A: Yes. Both parts are housed in 64-LQFP (10x10) surface mount packages with 45 I/O pins and identical pinout specifications.

Q: What is the difference between the part number suffixes BK0 and BF2?

A: The suffix variations indicate different manufacturing batches or internal revision levels from NXP USA Inc. These differences do not affect electrical performance, memory specifications, or functional capabilities.

Q: Are both parts RoHS compliant?

A: Yes. Both SPC5604BK0MLH4 and SPC5604BF2MLH4 are ROHS3 compliant with identical Moisture Sensitivity Level (MSL) ratings of 3 (168 Hours).

Q: Can these parts be used interchangeably in production?

A: Yes. Both parts meet identical specifications for voltage supply, processing speed, memory capacity, connectivity protocols, and thermal characteristics, making them suitable for interchangeable use in production environments.