SPC5604BAVLL6 Equivalent & Substitute Parts

Part Overview

The SPC5604BAVLL6 is an e200z0h MPC56xx Qorivva 32-bit single-core microcontroller manufactured by NXP Semiconductors. This embedded IC features 512KB FLASH program memory, 64KB EEPROM, and 32KB RAM with integrated connectivity interfaces including CANbus, I2C, LINbus, SCI, and SPI. The device operates at 64MHz with a supply voltage range of 3V to 5.5V and is housed in a 100-LQFP surface mount package. The part maintains Active product status and is ROHS3 compliant. Equivalent substitute parts are identified to support procurement flexibility and supply chain continuity.

Substiute Parts

SPC5604BAVLL6

NXP SemiconductorsIn Stock: 1156SPC5604BAVLL6 Datasheet

Current PartRFQ

SPC5604BK0VLL6

NXP USA Inc.In Stock: 1187SPC5604BK0VLL6 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the SPC5604BAVLL6 are identified based on electrical and mechanical parameter equivalence within the MPC56xx Qorivva series. The substitution criteria are strictly limited to the following parameters:

• Core processor architecture (e200z0h)
• Core size and speed (32-Bit Single-Core, 64MHz)
• Memory configuration (512KB FLASH, 64KB EEPROM, 32KB RAM)
• Supply voltage range (3V ~ 5.5V)
• Data converter specification (A/D 28x10b)
• I/O count (79 pins)
• Connectivity interfaces (CANbus, I2C, LINbus, SCI, SPI)
• Peripheral set (DMA, POR, PWM, WDT)
• Package type (100-LQFP)
• Operating temperature range (-40°C ~ 105°C)

Parts meeting all these parameters are classified as parametric equivalents and may be used interchangeably in applications designed for the SPC5604BAVLL6.

Parameter Comparison

Engineering Selection Recommendations

Both the SPC5604BAVLL6 and SPC5604BK0VLL6 maintain Active product status with identical electrical and mechanical specifications. Both parts are ROHS3 compliant and REACH unaffected, meeting current regulatory requirements. Selection between these parts may be based on procurement availability, supplier preference, or inventory management considerations, as all functional and compliance parameters are equivalent.

Frequently Asked Questions (FAQ)

Q: Can SPC5604BK0VLL6 be used as a direct replacement for SPC5604BAVLL6?

A: Yes. Both parts share identical core processor architecture, memory configuration, speed rating, supply voltage range, I/O count, connectivity interfaces, peripheral set, package type, and operating temperature range. They are parametric equivalents.

Q: Are there any differences in package dimensions between these parts?

A: No. Both parts use the 100-LQFP (14x14) surface mount package with identical physical dimensions and pin configuration.

Q: Do both parts meet the same compliance standards?

A: Yes. Both SPC5604BAVLL6 and SPC5604BK0VLL6 are ROHS3 compliant and REACH unaffected with identical moisture sensitivity levels (MSL 3, 168 Hours).

Q: What is the significance of the different manufacturer designations?

A: Both parts are manufactured by NXP. The designation difference (NXP Semiconductors vs. NXP USA Inc.) reflects organizational structure but does not affect electrical or mechanical equivalence.

Q: Are firmware or software modifications required when switching between these parts?

A: No modifications are required. Identical processor architecture, memory configuration, and peripheral sets ensure software compatibility without changes.