SPC5602BK0VLL4 Equivalent & Substitute Parts

Part Overview

The SPC5602BK0VLL4 is an e200z0h MPC56xx Qorivya 32-bit single-core microcontroller IC manufactured by NXP USA Inc. This embedded processor operates at 48MHz with 256KB FLASH program memory, 64KB EEPROM, and 24KB RAM. The device integrates CANbus, I2C, LINbus, SCI, and SPI connectivity interfaces alongside DMA, POR, PWM, and WDT peripherals. The SPC5602BK0VLL4 is housed in a 100-LQFP surface mount package and maintains active product status with ROHS3 compliance. Identifying equivalent and substitute parts is necessary for supply chain continuity, inventory management, and design flexibility when the primary part number becomes unavailable or when alternative sourcing is required.

Substiute Parts

SPC5602BK0VLL4

NXP USA Inc.In Stock: 2009SPC5602BK0VLL4 Datasheet

Current PartRFQ

SPC5602BK0VLL4

NXP USA Inc.In Stock: 2009SPC5602BK0VLL4 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the SPC5602BK0VLL4 microcontroller is determined by strict parametric equivalence across core functional and physical characteristics. The following parameters establish the substitution criteria:

• Core Processor Architecture: e200z0h processor core
• Memory Configuration: 256KB FLASH, 64KB EEPROM, 24KB RAM
• Operating Frequency: 48MHz
• Interface Connectivity: CANbus, I2C, LINbus, SCI, SPI support
• Peripheral Set: DMA, POR, PWM, WDT functionality
• I/O Count: 79 I/O pins
• Package Format: 100-LQFP (14x14mm) surface mount
• Voltage Range: 3V to 5.5V supply compatibility
• Temperature Range: -40°C to 105°C operating specification
• Compliance Standards: ROHS3 compliance and REACH unaffected status

Only parts matching all specified parameters across processor core, memory architecture, clock speed, connectivity interfaces, peripheral configuration, pin count, package type, electrical ratings, and environmental specifications qualify as direct substitutes.

Parameter Comparison

Engineering Selection Recommendations

The SPC5602BK0VLL4 maintains active product status with full ROHS3 compliance and REACH unaffected certification. The substitute part SPC5602BK0VLL4 is identical to the main part number and carries the same compliance certifications, product status, and regulatory approvals. Selection between these parts is based on inventory availability and supplier sourcing rather than technical differentiation. Both parts are suitable for applications requiring e200z0h processor architecture with the specified memory configuration, connectivity interfaces, and environmental operating range. The 100-LQFP surface mount package format and MSL 3 moisture sensitivity rating apply uniformly across all equivalent parts.

Frequently Asked Questions (FAQ)

Q: What defines a substitute part for the SPC5602BK0VLL4? A: A substitute part must match all core parameters including the e200z0h processor core, 256KB FLASH memory, 64KB EEPROM, 24KB RAM, 48MHz clock speed, 79 I/O pins, CANbus/I2C/LINbus/SCI/SPI connectivity, DMA/POR/PWM/WDT peripherals, 100-LQFP package format, 3V to 5.5V voltage range, and -40°C to 105°C operating temperature specification.

Q: Are there alternative part numbers within the MPC56xx Qorivva series? A: Substitution is limited to parts with identical parametric specifications. Variations in memory size, clock speed, I/O count, or package format constitute different product variants rather than substitutes.

Q: What is the significance of the 100-LQFP (14x14mm) package format? A: The 100-LQFP package specifies the physical footprint, pin count, and mounting requirements for PCB integration. Substitute parts must use the identical package format to ensure mechanical and electrical compatibility with existing circuit board designs.

Q: Does the MSL 3 (168 Hours) moisture sensitivity rating affect substitution? A: Yes. MSL 3 rating indicates moisture sensitivity level and bake-out requirements. Substitute parts must maintain the same MSL rating to ensure equivalent handling, storage, and assembly process compatibility.

Q: How does ROHS3 compliance impact part selection? A: ROHS3 compliance certifies that the part meets restricted substance directives. Both the main part and substitute maintain ROHS3 compliance, ensuring regulatory equivalence for applications subject to environmental and hazardous substance restrictions.

Q: What role does product status play in substitution decisions? A: Active product status indicates ongoing manufacturer support, availability, and continued compliance with current standards. Both the main part and substitute maintain active status, ensuring long-term supply chain viability.