SPC5602BF2VLH4 Equivalent & Substitute Parts

Part Overview

The SPC5602BF2VLH4 is an e200z0h MPC56xx Qorivva 32-bit single-core microcontroller manufactured by NXP USA Inc. This embedded IC operates at 48MHz with 256KB FLASH program memory and is housed in a 64-LQFP (10x10) surface mount package. The device is currently in active product status and maintains full compliance with ROHS3 and REACH standards. Substitute parts are identified when equivalent electrical and mechanical specifications are required for design flexibility, inventory management, or supply chain continuity.

Substiute Parts

SPC5602BF2VLH4

NXP USA Inc.In Stock: 1208SPC5602BF2VLH4 Datasheet

Current PartRFQ

SPC5602BK0VLH4

NXP USA Inc.In Stock: 1098SPC5602BK0VLH4 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the SPC5602BF2VLH4 is determined by strict equivalence across the following critical parameters:

• Core processor architecture (e200z0h)
• Memory configuration (256KB FLASH, 64K x 8 EEPROM, 24K x 8 RAM)
• Operating frequency (48MHz)
• Supply voltage range (3V ~ 5.5V)
• I/O count (45 pins)
• Connectivity interfaces (CANbus, I2C, LINbus, SCI, SPI)
• Peripheral set (DMA, POR, PWM, WDT)
• Package type (64-LQFP 10x10)
• Compliance certifications (ROHS3, REACH)

The SPC5602BK0VLH4 meets all these criteria and is classified as a parametric equivalent substitute.

Parameter Comparison

Engineering Selection Recommendations

Both the SPC5602BF2VLH4 and SPC5602BK0VLH4 are active products from NXP USA Inc. with identical electrical and mechanical specifications. Selection between these parts is based on availability and supply chain requirements rather than functional differences. Both devices maintain ROHS3 compliance and REACH unaffected status, ensuring regulatory compatibility in industrial and automotive applications. The identical MSL rating of 3 (168 Hours) applies to both parts for moisture-sensitive storage and handling protocols.

Frequently Asked Questions (FAQ)

Q: Are SPC5602BF2VLH4 and SPC5602BK0VLH4 pin-compatible?

A: Yes. Both devices use the 64-LQFP (10x10) package with identical pin assignments, I/O count (45), and electrical characteristics. Direct substitution on PCB layouts is supported without design modification.

Q: What is the difference between these two part numbers?

A: The part numbers differ only in the suffix designation (BF2 versus BK0). All electrical specifications, memory configurations, operating parameters, and compliance certifications are identical. The difference reflects internal NXP manufacturing or distribution coding.

Q: Can I use SPC5602BK0VLH4 as a drop-in replacement for SPC5602BF2VLH4?

A: Yes. The devices are parametric equivalents with matching core processor, clock speed, memory size, I/O configuration, and package type. No firmware or hardware modifications are required for substitution.

Q: Are there any temperature or voltage differences between these parts?

A: No. Both parts operate across the identical voltage range (3V ~ 5.5V) and temperature range (-40°C ~ 105°C TA).

Q: Do both parts support the same connectivity interfaces?

A: Yes. Both devices include CANbus, I2C, LINbus, SCI, and SPI interfaces with identical peripheral support (DMA, POR, PWM, WDT).

Q: What is the MSL rating and why does it matter?

A: Both parts have MSL 3 (168 Hours), indicating they require controlled moisture exposure during storage and handling. This rating applies to both the SPC5602BF2VLH4 and SPC5602BK0VLH4 equally.

Q: Are both parts RoHS compliant?

A: Yes. Both devices are ROHS3 compliant and REACH unaffected, meeting environmental and regulatory requirements for industrial applications.