SP706CN-L Equivalent & Substitute Parts

Part Overview

The SP706CN-L is a single-channel power management supervisor IC manufactured by MaxLinear, Inc., designed for power-on reset and simple reset applications. This device monitors a single voltage threshold at 4.4V with an active-low reset output and a 140ms minimum reset timeout. The SP706CN-L is currently discontinued at DiGi Electronics, necessitating identification of functionally equivalent alternatives from active product lines. Substitute parts must maintain compatibility with the 8-SOIC package format and preserve core supervisory functionality while accommodating variations in electrical parameters and output characteristics.

Key Parameters

Parameter	SP706CN-L
Manufacturer	MaxLinear, Inc.
Category	Power Management (PMIC)
Type	Simple Reset/Power-On Reset
Number of Voltages Monitored	1
Voltage - Threshold	4.4V
Reset	Active Low
Reset Timeout	140ms Minimum
Operating Temperature	0°C ~ 70°C (TA)
Package / Case	8-SOIC (0.154", 3.90mm Width)
Mounting Type	Surface Mount
RoHS Status	RoHS Compliant
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Product Status	Discontinued at DiGi Electronics

Substitute Part Grouping Explanation

Substitution of the SP706CN-L is determined by the following critical parameters:

Mandatory Compatibility Criteria:

Package format: 8-SOIC (0.154", 3.90mm Width)
Mounting type: Surface Mount
Number of voltages monitored: 1 channel
Voltage threshold: 4.4V
Reset polarity: Active Low
Reset timeout: Minimum 140ms

Acceptable Variations:

Operating temperature range may extend beyond the original 0°C ~ 70°C specification
Output configuration may differ (open-drain vs. push-pull/totem-pole)
Product status must be Active to ensure ongoing availability

Substitute parts are grouped into two categories based on output type and reset characteristics. The primary group consists of Analog Devices ADM706ARZ variants with 4.4V threshold and active-low reset, offering push-pull output and extended temperature range (-40°C ~ 85°C). Secondary alternatives include MAX706ESA+ and MAX706ESA+T from Analog Devices/Maxim Integrated, which maintain identical threshold and reset specifications with equivalent reset timeout performance.

Parameter Comparison

Part Number	Manufacturer	Voltage Threshold	Reset Polarity	Reset Timeout (Min)	Output Type	Operating Temp	Package	Product Status	RoHS Status
SP706CN-L	MaxLinear, Inc.	4.4V	Active Low	140ms	—	0°C ~ 70°C	8-SOIC	Discontinued	RoHS Compliant
ADM706ARZ	Analog Devices Inc.	4.4V	Active Low	160ms	Push-Pull, Totem Pole	-40°C ~ 85°C	8-SOIC	Active	ROHS3 Compliant
ADM706ARZ-REEL	Analog Devices Inc.	4.4V	Active Low	160ms	Push-Pull, Totem Pole	-40°C ~ 85°C	8-SOIC	Active	ROHS3 Compliant
ADM706ARZ-REEL7	Analog Devices Inc.	4.4V	Active Low	160ms	Push-Pull, Totem Pole	-40°C ~ 85°C	8-SOIC	Active	ROHS3 Compliant
DS1706ESA+	Analog Devices Inc./Maxim Integrated	4.4V	Active Low	130ms	Push-Pull, Totem Pole	-40°C ~ 85°C	8-SOIC	Active	ROHS3 Compliant
MAX706ESA+	Analog Devices Inc./Maxim Integrated	4.4V	Active Low	140ms	Push-Pull, Totem Pole	-40°C ~ 85°C	8-SOIC	Active	ROHS3 Compliant
MAX706ESA+T	Analog Devices Inc./Maxim Integrated	4.4V	Active Low	140ms	Push-Pull, Totem Pole	-40°C ~ 85°C	8-SOIC	Active	ROHS3 Compliant

Engineering Selection Recommendations

Primary Substitutes (Highest Compatibility):

MAX706ESA+ and MAX706ESA+T are the preferred direct replacements for SP706CN-L. Both parts maintain the identical 4.4V voltage threshold, active-low reset polarity, and 140ms reset timeout specification. These devices are manufactured by Analog Devices Inc./Maxim Integrated and carry Active product status with ROHS3 compliance. The extended operating temperature range (-40°C ~ 85°C) provides superior thermal margin compared to the original specification. MAX706ESA+T is supplied in Cut Tape & Digi-Reel® packaging with significantly higher inventory availability (30,300 units), making it the optimal choice for production applications.

Secondary Substitutes (Functional Equivalents):

ADM706ARZ, ADM706ARZ-REEL, and ADM706ARZ-REEL7 provide functional equivalence with identical 4.4V threshold and active-low reset characteristics. These parts feature push-pull/totem-pole output configuration and 160ms reset timeout, which exceeds the 140ms minimum requirement. All three variants are Active products with ROHS3 compliance and extended temperature operation. ADM706ARZ-REEL7 offers the highest inventory level (27,036 units) among this group.

Alternative Consideration:

DS1706ESA+ from the MicroMonitor™ series maintains 4.4V threshold and active-low reset with a 130ms reset timeout, which is within acceptable parameters. This part is Active and ROHS3 compliant but has lower inventory availability (1,537 units).

Non-Compatible Alternatives:

ADM706PARZ, ADM706PARZ-REEL, ADM706SARZ, and ADM706SARZ-REEL are not suitable direct replacements due to differing voltage thresholds (2.63V and 2.93V respectively) and reset polarity variations (active-high for PARZ variants). These parts serve different application requirements and should not be selected for SP706CN-L replacement.

Frequently Asked Questions (FAQ)

Q: Can I use ADM706ARZ as a direct replacement for SP706CN-L?

A: Yes. ADM706ARZ is functionally compatible with SP706CN-L. Both devices monitor a single 4.4V threshold with active-low reset output in 8-SOIC packaging. The ADM706ARZ provides a 160ms reset timeout, which exceeds the SP706CN-L's 140ms minimum requirement. The primary difference is the push-pull output configuration versus the original device's unspecified output type. Extended operating temperature (-40°C ~ 85°C) provides additional thermal margin.

Q: What is the difference between MAX706ESA+ and MAX706ESA+T?

A: Both parts are electrically identical with 4.4V threshold, active-low reset, and 140ms reset timeout. The difference is packaging: MAX706ESA+ is supplied in Tube packaging, while MAX706ESA+T is supplied in Cut Tape & Digi-Reel® format. MAX706ESA+T has significantly higher inventory availability (30,300 units vs. 1,829 units) and is recommended for production applications.

Q: Why are ADM706PARZ and ADM706SARZ not suitable replacements?

A: These variants have different voltage thresholds (2.63V for PARZ, 2.93V for SARZ) compared to the SP706CN-L's 4.4V specification. Additionally, ADM706PARZ uses active-high reset polarity instead of active-low. These differences make them incompatible with circuits designed for the SP706CN-L.

Q: Does the extended operating temperature range of substitute parts affect compatibility?

A: No. The substitute parts' extended operating temperature range (-40°C ~ 85°C) is a superset of the SP706CN-L's 0°C ~ 70°C specification. This provides additional thermal margin and does not compromise compatibility in applications operating within the original temperature range.

Q: Are all substitute parts RoHS compliant?

A: Yes. All recommended substitute parts carry ROHS3 compliance certification, meeting current environmental and regulatory requirements. The original SP706CN-L is RoHS Compliant, and all active substitutes maintain or exceed this compliance level.

Q: What packaging options are available for substitute parts?

A: Substitute parts are available in multiple packaging formats: Tube (ADM706ARZ, MAX706ESA+), Cut Tape & Digi-Reel® (ADM706ARZ-REEL, ADM706ARZ-REEL7, MAX706ESA+T), and Tape & Reel (ADM706PARZ-REEL). Selection depends on production volume and handling requirements. For high-volume applications, Cut Tape & Digi-Reel® or Tape & Reel formats are recommended.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message