SP481ECP-L RS422/RS485 Half-Duplex Transceiver Equivalent & Substitute Parts

Part Overview

The SP481ECP-L is a 1/1 half-duplex RS422/RS485 transceiver IC in 8-DIP packaging manufactured by MaxLinear, Inc. This component is classified as obsolete, making equivalent substitute parts necessary for new designs and ongoing production support. The SP481ECP-L operates within the 4.75V to 5.25V supply range and supports data rates up to 10 Mbps with a receiver hysteresis of 20 mV. Identifying compatible alternatives ensures design continuity and supply chain reliability.

Key Parameters

Parameter	SP481ECP-L
Manufacturer	MaxLinear, Inc.
Type	Transceiver
Protocol	RS422, RS485
Number of Drivers/Receivers	1/1
Duplex	Half
Data Rate	10 Mbps
Voltage - Supply	4.75V ~ 5.25V
Operating Temperature	-40°C ~ 85°C
Receiver Hysteresis	20 mV
Mounting Type	Through Hole
Package / Case	8-DIP (0.300", 7.62mm)
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Product Status	Obsolete

Substitute Part Grouping Explanation

Substitute parts for the SP481ECP-L are selected based on strict electrical and mechanical compatibility criteria. All substitute candidates must meet the following requirements:

Core Compatibility Parameters:

Protocol: RS422/RS485 half-duplex transceiver
Number of Drivers/Receivers: 1/1 configuration
Package: 8-DIP (0.300", 7.62mm)
Mounting Type: Through Hole
Voltage Supply Range: 4.75V ~ 5.25V (exact match required)
Moisture Sensitivity Level: 1 (Unlimited)

Acceptable Variations:

Operating Temperature Range: Substitute parts may have narrower ranges (0°C ~ 70°C) or equivalent/wider ranges (-40°C ~ 85°C)
Data Rate: Substitute parts operate at 2.5 Mbps, which is lower than the original 10 Mbps specification
Receiver Hysteresis: Substitute parts range from 45 mV to 70 mV, compared to the original 20 mV

All identified substitutes are active products with current manufacturing status and RoHS3 compliance, ensuring long-term availability and regulatory alignment.

Parameter Comparison

Part Number	Manufacturer	Protocol	Drivers/Receivers	Data Rate	Receiver Hysteresis	Operating Temperature	Product Status	RoHS Status
SP481ECP-L	MaxLinear, Inc.	RS422, RS485	1/1	10 Mbps	20 mV	-40°C ~ 85°C	Obsolete	Not specified
LTC1481CN8#PBF	Analog Devices Inc.	RS422, RS485	1/1	2.5 Mbps	45 mV	0°C ~ 70°C	Active	ROHS3 Compliant
LTC1481IN8#PBF	Analog Devices Inc.	RS422, RS485	1/1	2.5 Mbps	45 mV	-40°C ~ 85°C	Active	ROHS3 Compliant
MAX481CPA+	Analog Devices Inc./Maxim Integrated	RS422, RS485	1/1	2.5 Mbps	70 mV	0°C ~ 70°C	Active	ROHS3 Compliant
MAX481ECPA+	Analog Devices Inc./Maxim Integrated	RS422, RS485	1/1	2.5 Mbps	70 mV	0°C ~ 70°C	Active	ROHS3 Compliant
MAX481EPA+	Analog Devices Inc./Maxim Integrated	RS422, RS485	1/1	2.5 Mbps	70 mV	-40°C ~ 85°C	Active	ROHS3 Compliant
MAX485ECPA+	Analog Devices Inc./Maxim Integrated	RS422, RS485	1/1	2.5 Mbps	70 mV	0°C ~ 70°C	Active	ROHS3 Compliant
MAX485EEPA+	Analog Devices Inc./Maxim Integrated	RS422, RS485	1/1	2.5 Mbps	70 mV	-40°C ~ 85°C	Active	ROHS3 Compliant

Engineering Selection Recommendations

Primary Selection Criteria:

All substitute parts listed are active products with ROHS3 compliance and REACH unaffected status, ensuring regulatory alignment and long-term supply availability. The choice between substitutes depends on specific application requirements:

For Extended Temperature Range Applications (-40°C ~ 85°C):

LTC1481IN8#PBF: Analog Devices LTC1481 series with 45 mV receiver hysteresis
MAX481EPA+: Maxim Integrated MAX481 series with 70 mV receiver hysteresis
MAX485EEPA+: Maxim Integrated MAX485 series with 70 mV receiver hysteresis

For Standard Temperature Range Applications (0°C ~ 70°C):

LTC1481CN8#PBF: Analog Devices LTC1481 series with 45 mV receiver hysteresis
MAX481CPA+: Maxim Integrated MAX481 series with 70 mV receiver hysteresis
MAX481ECPA+: Maxim Integrated MAX481 series with 70 mV receiver hysteresis
MAX485ECPA+: Maxim Integrated MAX485 series with 70 mV receiver hysteresis

All substitutes maintain identical package geometry (8-DIP), supply voltage range (4.75V ~ 5.25V), and moisture sensitivity classification (MSL 1). Inventory availability ranges from 893 to 5100 pieces across substitute options.

Frequently Asked Questions (FAQ)

Q: Can the SP481ECP-L be directly replaced with any of the listed substitutes?

A: Yes, all listed substitutes are pin-compatible and functionally equivalent within the specified electrical parameters. The 8-DIP package geometry is identical across all parts, enabling direct socket replacement without PCB modifications.

Q: What is the significance of the data rate difference (10 Mbps vs. 2.5 Mbps)?

A: The SP481ECP-L supports 10 Mbps operation, while all substitutes operate at 2.5 Mbps. For applications requiring data rates below 2.5 Mbps, substitutes are fully compatible. Applications requiring higher data rates must evaluate alternative transceiver architectures.

Q: How do receiver hysteresis differences affect circuit performance?

A: The SP481ECP-L has 20 mV receiver hysteresis, while substitutes range from 45 mV to 70 mV. Higher hysteresis values provide improved noise immunity but may reduce sensitivity to small signal transitions. Circuit validation is necessary for noise-critical applications.

Q: Which substitute is recommended for new designs?

A: Selection depends on operating temperature requirements. For -40°C ~ 85°C operation, choose LTC1481IN8#PBF, MAX481EPA+, or MAX485EEPA+. For 0°C ~ 70°C operation, any listed substitute is suitable. All are active products with established supply chains.

Q: Are all substitutes RoHS compliant?

A: Yes, all substitute parts are ROHS3 compliant and REACH unaffected, meeting current regulatory requirements for electronic component manufacturing and distribution.

Q: What is the inventory status for these substitutes?

A: Current inventory ranges from 893 pieces (LTC1481CN8#PBF) to 5100 pieces (LTC1481IN8#PBF). All substitutes are classified as new original stock, ensuring component authenticity and reliability.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message