SP3088EMN-L Equivalent & Substitute Parts

Part Overview

The SP3088EMN-L is a half-duplex RS422/RS485 transceiver IC manufactured by MaxLinear, Inc., housed in an 8-SOIC surface mount package. This device functions as a 1/1 transceiver (one driver and one receiver) for serial communication applications requiring robust noise immunity and extended temperature operation.

The SP3088EMN-L is classified as obsolete. Locating equivalent substitute parts is necessary to support ongoing system maintenance, design revisions, and procurement continuity where original inventory is depleted or unavailable.

Substiute Parts

SP3088EMN-L
MaxLinear, Inc.In Stock: 1120SP3088EMN-L Datasheet
SP3088EMN-L
Current Part
SP3088EEN-L
MaxLinear, Inc.In Stock: 4333SP3088EEN-L Datasheet
SP3088EEN-L
Direct

Key Parameters

Parameter Value
Manufacturer Part Number SP3088EMN-L
Manufacturer MaxLinear, Inc.
Category Interface
Type Transceiver
Protocol RS422, RS485
Number of Drivers/Receivers 1/1
Duplex Half
Receiver Hysteresis 100 mV
Data Rate 20 Mbps
Voltage - Supply 4.5V ~ 5.5V
Operating Temperature -40°C ~ 125°C
Mounting Type Surface Mount
Package / Case 8-SOIC (0.154", 3.90mm Width)
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Product Status Obsolete

Substitute Part Grouping Explanation

Substitution of the SP3088EMN-L is determined by the following critical parameters:

  • Protocol Compatibility: Both main and substitute parts must support RS422 and RS485 protocols
  • Transceiver Configuration: 1/1 driver/receiver topology with half-duplex operation
  • Electrical Specifications: Receiver hysteresis of 100 mV, data rate of 20 Mbps, and supply voltage range of 4.5V ~ 5.5V
  • Package Compatibility: 8-SOIC surface mount package with identical physical dimensions (0.154", 3.90mm Width)
  • Thermal Performance: Operating temperature range must accommodate the application requirements

The SP3088EEN-L qualifies as a direct substitute based on matching all critical electrical and mechanical parameters. The primary distinction is product status and operating temperature range, which affects long-term availability and application suitability.

Parameter Comparison

Parameter SP3088EMN-L (Main) SP3088EEN-L (Substitute)
Manufacturer MaxLinear, Inc. MaxLinear, Inc.
Type Transceiver Transceiver
Protocol RS422, RS485 RS422, RS485
Number of Drivers/Receivers 1/1 1/1
Duplex Half Half
Receiver Hysteresis 100 mV 100 mV
Data Rate 20 Mbps 20 Mbps
Voltage - Supply 4.5V ~ 5.5V 4.5V ~ 5.5V
Mounting Type Surface Mount Surface Mount
Package / Case 8-SOIC (0.154", 3.90mm Width) 8-SOIC (0.154", 3.90mm Width)
Moisture Sensitivity Level (MSL) 1 (Unlimited) 1 (Unlimited)
Operating Temperature -40°C ~ 125°C -40°C ~ 85°C
Product Status Obsolete Active
RoHS Status Not specified ROHS3 Compliant

Engineering Selection Recommendations

The SP3088EEN-L is the qualified substitute for the SP3088EMN-L based on electrical and mechanical parameter equivalence. Key selection factors:

Product Status: The SP3088EEN-L carries Active status with ROHS3 compliance certification, ensuring long-term availability and regulatory alignment for new designs and production continuity.

Operating Temperature Consideration: The SP3088EMN-L supports -40°C ~ 125°C operation, while the SP3088EEN-L supports -40°C ~ 85°C. Applications requiring operation above 85°C must evaluate thermal requirements against the substitute's maximum rating.

Compliance: The SP3088EEN-L is ROHS3 compliant and REACH unaffected, meeting modern environmental and regulatory standards for component procurement.

Inventory Status: The SP3088EEN-L maintains active inventory (4298 Pcs), providing reliable procurement availability compared to the obsolete SP3088EMN-L.

Frequently Asked Questions (FAQ)

Q: Can the SP3088EEN-L directly replace the SP3088EMN-L in existing designs?

A: Yes, for applications operating within -40°C ~ 85°C. The SP3088EEN-L matches all critical electrical parameters (protocol, data rate, supply voltage, receiver hysteresis) and package specifications. Applications requiring operation above 85°C require thermal analysis to confirm compatibility.

Q: Are there package differences between these parts?

A: No. Both parts use the 8-SOIC surface mount package with identical physical dimensions (0.154", 3.90mm Width). PCB layout and footprints are interchangeable.

Q: What is the significance of the operating temperature difference?

A: The SP3088EMN-L supports extended temperature operation to 125°C, while the SP3088EEN-L maximum is 85°C. For applications operating in the 85°C ~ 125°C range, the SP3088EMN-L specification must be maintained or alternative parts evaluated.

Q: Why is the SP3088EMN-L obsolete?

A: Product obsolescence is determined by manufacturer lifecycle decisions. The SP3088EEN-L represents the active equivalent, ensuring continued availability and regulatory compliance for new procurement.

Q: Are there compliance differences?

A: The SP3088EEN-L is certified ROHS3 compliant and REACH unaffected. The SP3088EMN-L compliance status is not specified in available documentation. For regulated applications, the SP3088EEN-L provides documented compliance assurance.

Request Quote (Ships tomorrow)