SP24W1G30 Equivalent & Substitute Parts

Part Overview

The SP24W1G30 is a pin contact for circular connectors manufactured by Amphenol Sine Systems Corp, part of the ecomate® Aquarius™ series. This component is a signal, stamped pin contact designed for 24-26 AWG wire gauges with Size 20 crimp termination and gold plating. The part is currently classified as obsolete, making identification of active equivalent components essential for ongoing procurement and system maintenance.

Substiute Parts

SP24W1G30

Amphenol Sine Systems CorpIn Stock: 925SP24W1G30 Datasheet

Current PartRFQ

SP24W2G30

Amphenol Sine Systems CorpIn Stock: 1182SP24W2G30 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the obsolete SP24W1G30 is determined by strict equivalence across all critical electrical and mechanical parameters. The substitute part SP24W2G30 maintains identical specifications in the following key areas:

Electrical Parameters:

• Contact type, size, and termination method (Pin, Size 20, Crimp)
• Wire gauge range (24-26 AWG / 0.14 ~ 0.25 mm²)
• Contact material and finish (Copper Alloy, Gold plating at 30.0 µin)

Mechanical Parameters:

• Insulation support feature
• Base product number (SP24)

Compliance Parameters:

• RoHS3 compliance
• REACH unaffected status
• Moisture sensitivity level (MSL 1)

The primary distinction between SP24W1G30 and SP24W2G30 is product status and packaging configuration. SP24W2G30 is an active product supplied in Tape & Reel packaging, whereas SP24W1G30 is obsolete.

Parameter Comparison

Engineering Selection Recommendations

SP24W2G30 is the direct substitute for SP24W1G30 based on complete electrical and mechanical parameter equivalence. The substitute part is currently active in production and maintains all compliance certifications required for the ecomate® Aquarius™ series.

Selection of SP24W2G30 is appropriate for:

• Direct replacement in existing connector assemblies
• New designs requiring 24-26 AWG pin contacts with Size 20 crimp termination
• Applications requiring ROHS3 compliance and REACH unaffected status
• Systems with unlimited moisture sensitivity tolerance (MSL 1)

The transition from SP24W1G30 to SP24W2G30 involves no electrical or mechanical redesign. Packaging differences (Tape & Reel for SP24W2G30) affect procurement and handling procedures only.

Frequently Asked Questions (FAQ)

Q: Can SP24W2G30 be used as a direct replacement for SP24W1G30?

A: Yes. SP24W2G30 is electrically and mechanically equivalent to SP24W1G30 across all specified parameters, including contact type, size, wire gauge range, termination method, material composition, and finish specifications.

Q: What is the difference between SP24W1G30 and SP24W2G30?

A: The primary differences are product status and packaging. SP24W1G30 is obsolete, while SP24W2G30 is an active product supplied in Tape & Reel packaging. All electrical and mechanical specifications are identical.

Q: Are there compliance differences between these parts?

A: No. Both parts maintain identical RoHS3 compliance, REACH unaffected status, and Moisture Sensitivity Level 1 (Unlimited) ratings.

Q: Does the Tape & Reel packaging of SP24W2G30 affect compatibility?

A: Tape & Reel packaging affects procurement, storage, and automated assembly handling only. It does not affect the electrical or mechanical performance of the contact itself.

Q: What wire gauges are supported by these contacts?

A: Both SP24W1G30 and SP24W2G30 support 24-26 AWG wire gauges, equivalent to 0.14 ~ 0.25 mm² cross-sectional area.

Q: Are these contacts suitable for high-reliability applications?

A: Both parts are ROHS3 compliant with gold-plated copper alloy contacts (30.0 µin finish thickness) and insulation support features, meeting requirements for signal-level circular connector applications within the ecomate® Aquarius™ series specifications.