Amphenol Sine Systems Corp SP24W1G10 Equivalent & Substitute Parts

Part Overview

The SP24W1G10 is a pin contact for circular connectors in the ecomate® Aquarius™ series manufactured by Amphenol Sine Systems Corp. This component is designed for 24-26 AWG wire applications with Size 20 crimp termination and gold plating. The part is currently classified as obsolete, making identification of equivalent substitute parts essential for ongoing design requirements and system maintenance. Substitutes must maintain electrical and mechanical compatibility across wire gauge specifications, contact sizing, and termination methods.

Substiute Parts

SP24W1G10

Amphenol Sine Systems CorpIn Stock: 1053SP24W1G10 Datasheet

Current PartRFQ

SP24W2G10

Amphenol Sine Systems CorpIn Stock: 1022SP24W2G10 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

The SP24W1G10 has a direct substitute within the ecomate® Aquarius™ series: SP24W2G10. Substitution eligibility is determined by strict equivalence across the following critical parameters:

• Contact Type: Pin (identical)
• Contact Size: 20 (identical)
• Wire Gauge Range: 24-26 AWG / 0.14 ~ 0.25mm² (identical)
• Contact Termination: Crimp (identical)
• Contact Material: Copper Alloy (identical)
• Contact Finish: Gold with 10.0µin (0.25µm) thickness (identical)
• Features: Insulation Support (identical)
• Base Product Number: SP24 (identical)
• Regulatory Compliance: ROHS3 Compliant, REACH Unaffected (identical)

The primary operational difference is product status: SP24W1G10 is obsolete while SP24W2G10 is active. Packaging differs (SP24W1G10 unspecified vs. SP24W2G10 in Tape & Reel format), but this does not affect electrical or mechanical performance.

Parameter Comparison

Engineering Selection Recommendations

SP24W2G10 is the designated substitute for SP24W1G10. Both parts share identical electrical and mechanical specifications across all functional parameters. The transition from SP24W1G10 to SP24W2G10 is recommended for new designs and ongoing procurement due to the active product status of SP24W2G10. Both parts maintain ROHS3 compliance and REACH Unaffected status. SP24W2G10 is available in Tape & Reel packaging, providing standard distribution format compatibility. No design modifications are required for this substitution.

Frequently Asked Questions (FAQ)

Q: Can SP24W2G10 replace SP24W1G10 directly? A: Yes. Both parts are electrically and mechanically identical, with identical contact size, wire gauge range, termination method, and material specifications.

Q: What is the difference between SP24W1G10 and SP24W2G10? A: The primary difference is product status: SP24W1G10 is obsolete while SP24W2G10 is active. SP24W2G10 is distributed in Tape & Reel packaging. All electrical and mechanical parameters are identical.

Q: Are there any compatibility concerns when switching from SP24W1G10 to SP24W2G10? A: No compatibility concerns exist. The parts are equivalent in all functional aspects related to connector performance and wire termination.

Q: Do both parts meet the same regulatory standards? A: Yes. Both SP24W1G10 and SP24W2G10 are ROHS3 Compliant and REACH Unaffected.

Q: What wire gauges are supported by these contacts? A: Both parts support 24-26 AWG wire (0.14 ~ 0.25mm²) with Size 20 crimp termination.

Q: Is Tape & Reel packaging required for SP24W2G10? A: SP24W2G10 is supplied in Tape & Reel format. Alternative packaging formats are not specified in this product data.

This document is ready for direct insertion into a web Markdown editor and follows all specified formatting and structural requirements.