Amphenol Sine Systems Corp SP24W1F Contact Pin Equivalent & Substitute Parts

Part Overview

The SP24W1F is a pin contact component designed for 24-26 AWG wire applications in Size 20 circular connector configurations. This part is currently in Obsolete product status, necessitating identification of suitable substitutes for ongoing design requirements and component procurement. The part operates within the ecomate® Aquarius™ series and is compliant with RoHS3 and REACH standards.

Substiute Parts

SP24W1F

Amphenol Sine Systems CorpIn Stock: 1007SP24W1F Datasheet

Current PartRFQ

SP24W2F

Amphenol Sine Systems CorpIn Stock: 12440SP24W2F Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the obsolete SP24W1F with the SP24W2F is valid based on electrical and mechanical parameter alignment. Both parts share identical specifications across all critical selection criteria:

Key Parameters for Substitution:

• Contact Size: 20
• Wire Gauge Range: 24-26 AWG (0.14 ~ 0.25 mm²)
• Contact Type: Pin
• Contact Termination: Crimp
• Contact Material: Copper Alloy
• Contact Finish: Gold (Flash)
• Series: ecomate® Aquarius™
• Insulation Support feature presence
• Type classification: Signal, Stamped

The primary distinction is product status: SP24W1F is Obsolete, while SP24W2F is Active, with improved inventory availability (12,406 units versus 923 units).

Parameter Comparison

Engineering Selection Recommendations

The SP24W2F provides a direct functional equivalent to the SP24W1F with active production status. Both parts maintain RoHS3 Compliance and REACH Unaffected certifications, ensuring regulatory alignment. Selection of SP24W2F is supported by its active product status and significantly higher inventory availability, providing supply chain continuity. The identical electrical and mechanical parameters confirm full substitution compatibility within ecomate® Aquarius™ circular connector assemblies.

Frequently Asked Questions (FAQ)

Q: Can SP24W2F be used as a direct replacement for SP24W1F in existing designs? A: Yes. Both parts conform to identical contact size (20), wire gauge (24-26 AWG), termination method (Crimp), material composition (Copper Alloy), and finish specifications (Gold Flash). Full substitution is supported without design modification.

Q: What is the primary reason for substitution? A: The SP24W1F has reached Obsolete product status. The SP24W2F, with identical functional specifications and Active status, ensures continued component availability and supply reliability.

Q: Are there packaging differences between these parts? A: Yes. The SP24W1F packaging is not specified in available data, while SP24W2F is supplied in Cut Tape (CT) packaging. This packaging difference does not affect electrical or mechanical compatibility.

Q: Do compliance certifications differ between these parts? A: No. Both parts maintain RoHS3 Compliance and REACH Unaffected status, ensuring regulatory equivalence in applications requiring environmental compliance.

Q: Is MSL rating the same for both parts? A: Yes. Both parts carry MSL Rating 1 (Unlimited), indicating identical moisture sensitivity handling and storage requirements.

This reference page is ready for direct integration into a web Markdown editor and follows all specified formatting and content requirements.