Equivalent & Substitute Parts for SP24M1G5

Part Overview

The SP24M1G5 is a pin contact for circular connectors manufactured by Amphenol Sine Systems Corp, part of the ecomate® Aquarius™ series. This component is a stamped signal pin contact designed for 24-26 AWG wire gauges with crimp termination and gold plating. The part is currently classified as obsolete, making identification of suitable substitute components essential for ongoing system maintenance and new design implementations.

Substiute Parts

SP24M1G5

Amphenol Sine Systems CorpIn Stock: 767SP24M1G5 Datasheet

Current PartRFQ

SP24M2G5

Amphenol Sine Systems CorpIn Stock: 771SP24M2G5 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the SP24M1G5 is determined by strict equivalence across the following critical parameters:

Mandatory Matching Parameters:

• Contact Type: Pin, Stamped
• Contact Size: 16
• Wire Gauge Range: 24-26 AWG (0.14 ~ 0.25mm²)
• Contact Termination: Crimp
• Contact Material: Copper Alloy
• Contact Finish: Gold
• Contact Finish Thickness: 5.00µin (0.127µm)
• Features: Insulation Support
• Series: ecomate® Aquarius™
• Manufacturer: Amphenol Sine Systems Corp

The SP24M1G5 has one identified substitute part: SP24M2G5. This substitute maintains identical electrical and mechanical specifications across all critical parameters. The primary distinction between these parts is packaging configuration and product status, with SP24M2G5 being an active product available in Tape & Reel packaging.

Parameter Comparison

Engineering Selection Recommendations

SP24M2G5 as Primary Substitute:

The SP24M2G5 is the direct functional equivalent to the obsolete SP24M1G5. Both components share identical electrical and mechanical specifications, including contact size, wire gauge compatibility, termination method, material composition, and finish specifications. Both parts maintain ROHS3 compliance and REACH unaffected status, ensuring regulatory alignment for applications requiring these certifications.

The SP24M2G5 is classified as an active product, providing assured long-term availability and supply chain continuity. This part is supplied in Tape & Reel packaging, which is the standard format for automated assembly operations and high-volume production environments.

For applications currently using SP24M1G5, direct substitution with SP24M2G5 is supported without modification to connector assemblies, mating interfaces, or electrical performance characteristics.

Frequently Asked Questions (FAQ)

Q: Can SP24M2G5 be used as a direct replacement for SP24M1G5?

A: Yes. SP24M2G5 is electrically and mechanically equivalent to SP24M1G5 across all critical parameters including contact size, wire gauge range, termination type, material, and finish specifications. Both parts are manufactured by Amphenol Sine Systems Corp within the ecomate® Aquarius™ series.

Q: What is the difference between SP24M1G5 and SP24M2G5?

A: The primary differences are product status and packaging. SP24M1G5 is obsolete with unspecified packaging, while SP24M2G5 is an active product supplied in Tape & Reel format. All electrical and mechanical specifications are identical.

Q: Are both parts RoHS and REACH compliant?

A: Yes. Both SP24M1G5 and SP24M2G5 are ROHS3 compliant and REACH unaffected, meeting regulatory requirements for restricted substance control.

Q: What wire gauges are compatible with these contacts?

A: Both parts accommodate 24-26 AWG wire (0.14 ~ 0.25mm²) with crimp termination.

Q: Is the Tape & Reel packaging of SP24M2G5 compatible with existing assembly processes?

A: Tape & Reel packaging is standard for automated pick-and-place assembly systems. Compatibility depends on your specific assembly equipment and processes. Verify your equipment specifications support this packaging format.

Q: What is the contact finish thickness specification?

A: Both parts feature gold plating with a thickness of 5.00µin (0.127µm) over copper alloy base material.