SP20M1G30 Equivalent & Substitute Parts

Part Overview

The SP20M1G30 is a pin contact for circular connectors manufactured by Amphenol Sine Systems Corp, part of the ecomate® Aquarius™ series. This component is designed for 20-22 AWG wire applications with Size 16 crimp termination and gold plating. The part is currently classified as obsolete, making identification of suitable substitutes essential for ongoing system maintenance and new design implementations where this connector series is specified.

Substiute Parts

SP20M1G30

Amphenol Sine Systems CorpIn Stock: 886SP20M1G30 Datasheet

Current PartRFQ

SP20M2G30

Amphenol Sine Systems CorpIn Stock: 980SP20M2G30 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution for the SP20M1G30 is determined by strict equivalence across the following critical parameters:

• Contact Size: 16
• Wire Gauge Range: 20-22 AWG (0.34 ~ 0.5mm²)
• Contact Termination: Crimp
• Contact Material: Copper Alloy
• Contact Finish: Gold at 30.0µin (0.76µm)
• Series Compatibility: ecomate® Aquarius™
• Insulation Support Feature: Present

The SP20M2G30 meets all these criteria and is classified as an active product, making it a direct functional equivalent suitable for replacement applications.

Parameter Comparison

Engineering Selection Recommendations

The SP20M2G30 is the direct substitute for the SP20M1G30. Both parts are manufactured by Amphenol Sine Systems Corp within the ecomate® Aquarius™ series and share identical electrical and mechanical specifications. The primary distinction is product status: SP20M1G30 is obsolete while SP20M2G30 is active and currently in production.

For new designs or system maintenance requiring this contact type, SP20M2G30 should be specified. Both parts maintain ROHS3 compliance and REACH unaffected status, ensuring regulatory alignment. The packaging difference (bulk versus Tape & Reel) does not affect functional compatibility and should be selected based on assembly process requirements.

Frequently Asked Questions (FAQ)

Q: Can SP20M2G30 be used as a direct replacement for SP20M1G30?

A: Yes. Both parts are identical in all electrical and mechanical parameters, including contact size, wire gauge range, termination method, material composition, and finish specifications. The only difference is product status and packaging format.

Q: What is the significance of the product status difference?

A: SP20M1G30 is classified as obsolete, indicating it is no longer manufactured. SP20M2G30 is active and in current production, ensuring long-term availability and supply chain reliability for new applications.

Q: Does packaging format affect compatibility?

A: No. SP20M1G30 is supplied in bulk packaging while SP20M2G30 is supplied in Tape & Reel format. Both contain identical contact components. Packaging selection should be based on assembly process requirements and volume needs.

Q: Are there any compliance differences between these parts?

A: No. Both parts maintain identical RoHS3 compliance and REACH unaffected status, ensuring they meet the same regulatory requirements.

Q: What wire gauges are compatible with these contacts?

A: Both parts are rated for 20-22 AWG wire, equivalent to 0.34 ~ 0.5mm² cross-sectional area.