SNLSX5014MUTAG Equivalent & Substitute Parts

Part Overview

The SNLSX5014MUTAG is a linear voltage regulator IC manufactured by onsemi, classified as an integrated circuit for voltage regulation applications. This component is designated as Obsolete and is no longer in active production. Due to its obsolete status, sourcing original units becomes increasingly difficult, making identification of functionally equivalent substitute parts essential for system maintenance, repair, and redesign efforts. The availability of 680 pieces in current inventory represents limited stock that will eventually deplete.

Substiute Parts

SNLSX5014MUTAG

onsemiIn Stock: 701SNLSX5014MUTAG Datasheet

Current PartRFQ

NLSX5014MUTAG

onsemiIn Stock: 48044NLSX5014MUTAG Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

The primary substitute for the SNLSX5014MUTAG is the NLSX5014MUTAG, also manufactured by onsemi. While the SNLSX5014MUTAG is classified as a linear regulator, the substitute part NLSX5014MUTAG is specified as a voltage level translator with bidirectional capability. This substitution is based on the following criteria provided in the component data:

Substitution Basis:

• Same manufacturer (onsemi)
• Identical base product number (NLSX5014)
• Both components designated as Obsolete
• Both ROHS3 Compliant
• Both REACH Unaffected
• Functionally related integrated circuit technology

The NLSX5014MUTAG operates with supply voltage ranges of 0.9 V to 4.5 V on both VCCA and VCCB inputs, supporting bidirectional signal translation across 4 channels at 100 Mbps data rate with auto-direction sensing and power-off protection features.

Parameter Comparison

Engineering Selection Recommendations

Selection of substitute components for the obsolete SNLSX5014MUTAG must be based on the following engineering criteria:

Compliance Verification: Both the original part and the identified substitute (NLSX5014MUTAG) maintain ROHS3 compliance and REACH unaffected status, ensuring regulatory alignment for applications subject to environmental and hazardous substance restrictions.

Product Status Consideration: Both components share Obsolete designation. The NLSX5014MUTAG maintains significantly higher inventory availability (48031 pieces versus 680 pieces), providing extended procurement window for system redesign or component qualification activities.

Functional Equivalence: The NLSX5014MUTAG is specified as a voltage level translator with bidirectional capability, operating across 0.9 V to 4.5 V supply ranges. This differs from the linear regulator classification of the original part. Substitution validity depends on application-specific requirements and circuit topology compatibility.

Packaging and Mounting: The NLSX5014MUTAG utilizes 12-UQFN surface mount packaging (1.7x2 mm footprint). Verification of PCB layout compatibility and reflow process parameters is required prior to implementation.

Frequently Asked Questions (FAQ)

Q: Why is the SNLSX5014MUTAG classified as obsolete?

A: The SNLSX5014MUTAG has reached end-of-life status with onsemi and is no longer manufactured. Existing inventory of 680 pieces represents remaining stock from prior production runs.

Q: Is the NLSX5014MUTAG a direct functional replacement?

A: The NLSX5014MUTAG shares the same manufacturer and base product number but is specified as a voltage level translator rather than a linear regulator. Functional equivalence must be verified against specific application requirements and circuit design parameters.

Q: What are the key electrical parameters for the NLSX5014MUTAG substitute?

A: The NLSX5014MUTAG operates with supply voltages from 0.9 V to 4.5 V on both VCCA and VCCB channels, supports bidirectional signal translation across 4 channels, and achieves 100 Mbps data rate with auto-direction sensing and power-off protection.

Q: What is the package configuration of the substitute part?

A: The NLSX5014MUTAG utilizes a 12-UQFN surface mount package with dimensions of 1.7 mm × 2 mm. This is a fine-pitch package requiring appropriate PCB design and assembly capabilities.

Q: Are both parts compliant with environmental regulations?

A: Both the SNLSX5014MUTAG and NLSX5014MUTAG are ROHS3 compliant and REACH unaffected, meeting current environmental and hazardous substance requirements.

Q: What is the operating temperature range for the substitute?

A: The NLSX5014MUTAG operates across a temperature range of -55°C to 125°C (ambient), suitable for industrial and extended temperature applications.

Q: How does inventory availability compare?

A: The original SNLSX5014MUTAG has 680 pieces available, while the NLSX5014MUTAG substitute has 48031 pieces in stock, providing significantly greater procurement flexibility.

Q: What packaging options are available for the NLSX5014MUTAG?

A: The NLSX5014MUTAG is supplied in Cut Tape (CT) and Digi-Reel® packaging formats for automated assembly processes.