SN74LVC86APWR-P Equivalent & Substitute Parts

Part Overview

The SN74LVC86APWR-P is a 4-channel, 2-input XOR (Exclusive OR) logic gate integrated circuit manufactured by Texas Instruments. This device operates across a supply voltage range of 1.65V to 3.6V and is housed in a 14-TSSOP surface mount package. The part is currently active in production with 990 pieces available in new original stock. XOR logic gates are essential components in digital circuits for comparison, parity generation, and arithmetic operations. Equivalent and substitute parts are identified to provide design flexibility, accommodate supply chain variations, and support different packaging and compliance requirements.

Substiute Parts

SN74LVC86APWR-P

Texas InstrumentsIn Stock: 1035SN74LVC86APWR-P Datasheet

Current PartRFQ

SN74LVC86APWR

Texas InstrumentsIn Stock: 2483SN74LVC86APWR Datasheet

Parametric EquivalentRFQ

SN74LVC86APW

Texas InstrumentsIn Stock: 4065SN74LVC86APW Datasheet

Parametric EquivalentRFQ

SN74LVC86APWG4

Texas InstrumentsIn Stock: 802SN74LVC86APWG4 Datasheet

Parametric EquivalentRFQ

SN74LVC86PWLE

Texas InstrumentsIn Stock: 4894SN74LVC86PWLE Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the SN74LVC86APWR-P are identified based on strict parametric equivalence. All substitute parts maintain identical electrical specifications across the following critical parameters: logic type (XOR, 4-channel, 2-input configuration), supply voltage range (1.65V ~ 3.6V), quiescent current (1 µA maximum), output current capabilities (24mA high and low), input logic levels, propagation delay (4.4ns @ 3.3V, 50pF), operating temperature range (-40°C ~ 125°C), and package type (14-TSSOP surface mount).

Substitution differences are limited to packaging format (Cut Tape & Digi-Reel, Tube, or Bulk), product status (Active or Discontinued at DiGi Electronics), and compliance certifications (RoHS3 Compliant versus RoHS non-compliant, REACH Affected versus REACH Unaffected). These variations do not affect electrical or mechanical compatibility in circuit applications but may impact procurement, storage, and regulatory requirements.

Parameter Comparison

Engineering Selection Recommendations

SN74LVC86APWR is the primary substitute for SN74LVC86APWR-P. Both parts are Active products with ROHS3 compliance and MSL 1 rating. The difference is packaging format: SN74LVC86APWR is supplied in Cut Tape (CT) & Digi-Reel format, while SN74LVC86APWR-P uses an unspecified format. This part is suitable for high-volume production environments requiring tape-and-reel packaging. Inventory availability is 2400 pieces.

SN74LVC86APW is a secondary substitute supplied in Tube packaging. This part maintains all electrical specifications and ROHS3 compliance with MSL 1 rating. Tube packaging is appropriate for lower-volume applications or manual assembly processes. Inventory availability is 4040 pieces, the highest among all substitutes.

SN74LVC86APWG4 is a parametric equivalent with identical electrical specifications and ROHS3 compliance. However, this part is Discontinued at DiGi Electronics, indicating limited future availability. Use this part only when existing inventory must be consumed or when alternative sources are confirmed. Inventory availability is 695 pieces.

SN74LVC86PWLE is a substitute with different compliance characteristics. This part is RoHS non-compliant and REACH Affected, with MSL 3 rating requiring storage within 168 hours of moisture exposure. Use this part only in applications where RoHS3 compliance is not required and where moisture control during storage and handling can be maintained. Inventory availability is 4801 pieces. This part is not recommended for new designs targeting RoHS3 compliance.

Frequently Asked Questions (FAQ)

Q: Can SN74LVC86APWR be used as a direct replacement for SN74LVC86APWR-P?

A: Yes. Both parts are electrically identical with identical logic specifications, voltage ranges, current ratings, propagation delays, and operating temperatures. The difference is packaging format (Cut Tape & Digi-Reel versus unspecified). Both are ROHS3 compliant with MSL 1 rating. Substitution is valid for circuit applications.

Q: What is the difference between the packaging formats offered?

A: SN74LVC86APWR is supplied in Cut Tape (CT) & Digi-Reel format, optimized for automated pick-and-place assembly. SN74LVC86APW is supplied in Tube packaging, suitable for manual assembly or lower-volume production. SN74LVC86PWLE is supplied in Bulk format. All three formats contain the same die and are electrically equivalent. Selection depends on assembly process requirements and volume.

Q: Is SN74LVC86APWG4 still available for new designs?

A: SN74LVC86APWG4 is Discontinued at DiGi Electronics. While 695 pieces remain in inventory, this part should not be selected for new designs. Use SN74LVC86APWR, SN74LVC86APW, or SN74LVC86PWLE instead to ensure long-term supply continuity.

Q: Why is SN74LVC86PWLE marked as RoHS non-compliant?

A: SN74LVC86PWLE does not meet ROHS3 compliance standards and is REACH Affected. This part is suitable only for applications where RoHS3 compliance is not a requirement. For designs targeting RoHS3 compliance, use SN74LVC86APWR, SN74LVC86APW, or SN74LVC86APWG4 instead.

Q: What does MSL 3 (168 Hours) mean for SN74LVC86PWLE?

A: MSL 3 indicates Moisture Sensitivity Level 3, requiring that the component be used within 168 hours of exposure to ambient moisture after the package is opened. This requires controlled storage conditions and careful handling. SN74LVC86APWR, SN74LVC86APW, and SN74LVC86APWG4 have MSL 1 (Unlimited), allowing indefinite storage after opening without moisture control.

Q: Are all substitute parts pin-compatible with the main part?

A: Yes. All substitute parts use the 14-TSSOP package with identical pin configuration and spacing (0.173", 4.40mm width). Pin-to-pin compatibility is guaranteed across all listed substitutes.

Q: Can I mix different packaging formats in the same production run?

A: Electrically, yes. All parts are functionally identical. However, mixing packaging formats may complicate inventory management and assembly process control. It is recommended to standardize on a single packaging format per production batch.

Q: Which substitute part has the highest inventory availability?

A: SN74LVC86PWLE has the highest inventory with 4801 pieces available. However, this part is RoHS non-compliant. For RoHS3-compliant parts, SN74LVC86APW has the highest inventory with 4040 pieces.