SN74LVC1G66DBVT Equivalent & Substitute Parts

Part Overview

The SN74LVC1G66DBVT is a single-circuit SPST-NO (Single Pole Single Throw - Normally Open) analog switch manufactured by Texas Instruments. This interface IC operates across a supply voltage range of 1.65V to 5.5V with a maximum on-state resistance of 10Ohm and is packaged in SOT-23-5 (Tape & Reel). The device is classified as Last Time Buy, indicating limited availability. Substitute parts are necessary to ensure design continuity and maintain supply chain flexibility for applications requiring equivalent switching performance and electrical characteristics.

Key Parameters

Parameter	Value
Manufacturer Part Number	SN74LVC1G66DBVT
Manufacturer	Texas Instruments
Switch Circuit Type	SPST - NO
Number of Circuits	1
On-State Resistance (Max)	10Ohm
Voltage - Supply, Single (V+)	1.65V ~ 5.5V
Switch Time (Ton, Toff) (Max)	4.2ns, 5ns
-3dB Bandwidth	300MHz
Channel Capacitance (CS(off), CD(off))	6pF
Current - Leakage (IS(off)) (Max)	100nA
Operating Temperature	-40°C ~ 85°C (TA)
Package / Case	SC-74A, SOT-753
Supplier Device Package	SOT-23-5
RoHS Status	ROHS3 Compliant
Moisture Sensitivity Level (MSL)	1 (Unlimited)

Substitute Part Grouping Explanation

Substitution of the SN74LVC1G66DBVT is determined by the following critical parameters:

Switch circuit topology: SPST - NO configuration
Single circuit count (1:1 multiplexer/demultiplexer)
On-state resistance compatibility: 10Ohm nominal
Supply voltage range: 1.65V ~ 5.5V single supply
Package compatibility: SOT-23-5 or SC-74A form factor
Operating temperature range: -40°C ~ 85°C minimum
Regulatory compliance: ROHS3 and REACH requirements

Substitute parts are grouped into two categories: parametric equivalents (identical electrical specifications and packaging) and manufacturer-recommended alternatives (functionally equivalent with minor parameter variations that do not affect application performance).

Parameter Comparison

Part Number	Manufacturer	On-State Resistance (Max)	Supply Voltage (V+)	Switch Time Ton/Toff (Max)	-3dB Bandwidth	Operating Temp	Package	Product Status
SN74LVC1G66DBVT	Texas Instruments	10Ohm	1.65V ~ 5.5V	4.2ns, 5ns	300MHz	-40°C ~ 85°C	SOT-23-5	Last Time Buy
SN74LVC1G66DBVR	Texas Instruments	10Ohm	1.65V ~ 5.5V	4.2ns, 5ns	300MHz	-40°C ~ 85°C	SOT-23-5	Active
SN74LVC1G66DBVRE4	Texas Instruments	10Ohm	1.65V ~ 5.5V	4.2ns, 5ns	300MHz	-40°C ~ 85°C	SOT-23-5	Discontinued at DiGi Electronics
SN74LVC1G66DBVRG4	Texas Instruments	10Ohm	1.65V ~ 5.5V	4.2ns, 5ns	300MHz	-40°C ~ 85°C	SOT-23-5	Discontinued at DiGi Electronics
74LVC1G66GV,125	Nexperia USA Inc.	10Ohm	1.65V ~ 5.5V	4.2ns, 5ns	500MHz	-40°C ~ 125°C	SC-74A	Active
ADG701LBRJZ-500RL7	Analog Devices Inc.	3Ohm	1.8V ~ 5V	12ns, 8ns (Typ)	200MHz	-40°C ~ 85°C	SOT-23-5	Active
BU4S66G2-TR	Rohm Semiconductor	280Ohm	3V ~ 18V	—	—	-40°C ~ 85°C	5-SSOP	Active
ISL43112IHZ-T	Renesas Electronics Corporation	20Ohm	±1.5V ~ 6V (Dual)	70ns, 45ns	—	-40°C ~ 85°C	5-SOT	Active
ISL84516IHZ-T	Renesas Electronics Corporation	20Ohm	±1.5V ~ 6V (Dual)	100ns, 75ns	—	-40°C ~ 85°C	5-SOT	Active

Engineering Selection Recommendations

Direct Parametric Equivalents (Recommended Primary Substitutes):

SN74LVC1G66DBVR is the primary substitute for SN74LVC1G66DBVT. Both devices share identical electrical specifications, supply voltage range, switching characteristics, and package configuration. SN74LVC1G66DBVR maintains Active product status with significantly higher inventory availability (35,088 units), making it the preferred choice for immediate procurement and long-term supply assurance.

Extended Compatibility Substitutes:

74LVC1G66GV,125 (Nexperia) is functionally equivalent with enhanced performance characteristics: extended operating temperature range (-40°C to 125°C), improved -3dB bandwidth (500MHz vs. 300MHz), and identical on-state resistance. This device is suitable for applications requiring higher temperature operation or improved high-frequency performance while maintaining ROHS3 compliance and Active product status.

Application-Specific Alternatives:

ADG701LBRJZ-500RL7 (Analog Devices) offers superior on-state resistance (3Ohm vs. 10Ohm) and lower leakage current (250pA vs. 100nA), making it suitable for low-impedance switching applications. However, it operates on a narrower supply voltage range (1.8V ~ 5V) and exhibits slower switching times (12ns/8ns vs. 4.2ns/5ns). This device is appropriate only when lower on-state resistance is a design requirement.

ISL43112IHZ-T and ISL84516IHZ-T (Renesas) support dual supply operation (±1.5V ~ 6V) and are suitable for applications requiring bipolar supply configurations. Both devices have higher on-state resistance (20Ohm) and slower switching performance compared to the SN74LVC1G66DBVT.

BU4S66G2-TR (Rohm Semiconductor) operates across a wider supply voltage range (3V ~ 18V) but exhibits significantly higher on-state resistance (280Ohm) and different packaging (5-SSOP). This device is suitable only for high-voltage applications where increased on-state resistance is acceptable.

Compliance and Certification:

All substitute parts maintain ROHS3 compliance and REACH Unaffected status, ensuring regulatory compatibility with the original SN74LVC1G66DBVT. Moisture Sensitivity Level (MSL) ratings vary: SN74LVC1G66DBVR maintains MSL 1 (Unlimited), while ISL43112IHZ-T and ISL84516IHZ-T are rated MSL 3 (168 Hours), requiring appropriate handling procedures during assembly.

Frequently Asked Questions (FAQ)

Q: Can SN74LVC1G66DBVR be used as a direct replacement for SN74LVC1G66DBVT?

A: Yes. SN74LVC1G66DBVR is a parametric equivalent with identical electrical specifications, supply voltage range, switching characteristics, and SOT-23-5 package. The only difference is packaging format (Cut Tape & Digi-Reel® vs. Tape & Reel) and product status (Active vs. Last Time Buy). Both devices are pin-compatible and functionally interchangeable.

Q: What is the primary advantage of 74LVC1G66GV,125 over SN74LVC1G66DBVT?

A: The 74LVC1G66GV,125 extends the operating temperature range to 125°C (vs. 85°C) and provides improved -3dB bandwidth of 500MHz (vs. 300MHz). On-state resistance remains identical at 10Ohm. This device is preferred for applications requiring higher temperature operation or enhanced high-frequency performance.

Q: Why does ADG701LBRJZ-500RL7 have lower on-state resistance?

A: ADG701LBRJZ-500RL7 is designed for low-impedance switching applications and achieves 3Ohm on-state resistance through different semiconductor technology. However, this results in slower switching times (12ns/8ns vs. 4.2ns/5ns) and narrower supply voltage range (1.8V ~ 5V). Selection depends on whether low impedance or fast switching is the priority.

Q: Are ISL43112IHZ-T and ISL84516IHZ-T compatible with single-supply applications?

A: No. Both Renesas devices require dual supply operation (±1.5V ~ 6V) and are not suitable for single-supply designs. They are appropriate only for applications with bipolar power supplies.

Q: What packaging considerations apply when substituting with BU4S66G2-TR?

A: BU4S66G2-TR uses 5-SSOP packaging instead of SOT-23-5, requiring PCB layout modifications and different soldering procedures. Additionally, its 280Ohm on-state resistance is significantly higher than the original 10Ohm specification, limiting its use to applications where increased impedance is acceptable.

Q: Do all substitute parts maintain the same moisture sensitivity level?

A: No. SN74LVC1G66DBVR maintains MSL 1 (Unlimited), while ISL43112IHZ-T and ISL84516IHZ-T are rated MSL 3 (168 Hours), requiring controlled storage and handling procedures. Verify MSL requirements for your manufacturing process before selection.

Q: Which substitute offers the best supply voltage flexibility?

A: BU4S66G2-TR operates across the widest supply range (3V ~ 18V), making it suitable for high-voltage applications. However, its 280Ohm on-state resistance and different packaging limit general-purpose substitution. For standard single-supply applications, SN74LVC1G66DBVR and 74LVC1G66GV,125 maintain the original 1.65V ~ 5.5V range.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message