SN74LVC1G11DRYR Equivalent & Substitute Parts

Part Overview

The SN74LVC1G11DRYR is a single-channel 3-input AND gate logic IC manufactured by Texas Instruments in a 6-SON (1.45x1) surface mount package. This component is classified as an active product with full RoHS3 compliance and unlimited moisture sensitivity rating. Substitute parts are identified based on functional equivalence within the 74LVC1G11 logic gate family, maintaining identical logic operation while accommodating different packaging and manufacturer specifications.

Substiute Parts

SN74LVC1G11DRYR

Texas InstrumentsIn Stock: 2058SN74LVC1G11DRYR Datasheet

Current PartRFQ

74LVC1G11FZ4-7

Diodes IncorporatedIn Stock: 4331074LVC1G11FZ4-7 Datasheet

MFR RecommendedRFQ

74LVC1G11GM,115

Nexperia USA Inc.In Stock: 1845674LVC1G11GM,115 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the SN74LVC1G11DRYR are qualified based on the following criteria:

All substitute parts share the base product number 74LVC1G11, confirming identical logic function as a single-channel 3-input AND gate. Electrical parameters including supply voltage range (1.65V ~ 5.5V), input logic levels, output current capability (32mA high and low), and propagation delay (4.6ns @ 5V, 50pF) are maintained across all qualified substitutes. All parts operate within the -40°C ~ 125°C temperature range and are surface mount devices with ROHS3 compliance and unlimited moisture sensitivity rating.

Substitution is permitted across different package types (6-SON, X2-DFN1410-6, 6-XSON) provided the printed circuit board layout accommodates the physical dimensions and pin configuration of the selected alternative. Manufacturer variations (Texas Instruments, Diodes Incorporated, Nexperia USA Inc.) do not affect functional compatibility when electrical specifications remain within specified tolerances.

Parameter Comparison

Engineering Selection Recommendations

All three parts maintain active product status with full ROHS3 compliance and REACH unaffected classification. The 74LVC1G11GM,115 from Nexperia exhibits the lowest quiescent current at 4 µA, making it suitable for power-constrained applications. The SN74LVC1G11DRYR from Texas Instruments operates at 10 µA quiescent current. The 74LVC1G11FZ4-7 from Diodes Incorporated specifies 40 µA quiescent current, which remains within acceptable limits for most applications but represents higher standby power consumption.

Package selection depends on PCB layout constraints. The 6-SON (1.45x1) package of the original part differs physically from the X2-DFN1410-6 and 6-XSON alternatives, requiring footprint verification before substitution. All parts share identical electrical performance characteristics and are suitable for direct functional replacement when physical package compatibility is confirmed.

Frequently Asked Questions (FAQ)

Q: Can the 74LVC1G11FZ4-7 directly replace the SN74LVC1G11DRYR?

A: Functional replacement is possible. Both parts are 3-input AND gates with identical logic operation, supply voltage range, input/output levels, and propagation delay. However, the package types differ (6-SON versus X2-DFN1410-6), requiring PCB footprint compatibility verification before substitution.

Q: What is the significance of the base product number 74LVC1G11?

A: The base product number identifies the logic function and electrical specification family. All parts sharing this base number are functionally equivalent 3-input AND gates with identical electrical performance parameters, regardless of manufacturer or package variant.

Q: How do quiescent current differences affect part selection?

A: Quiescent current represents standby power consumption. The 74LVC1G11GM,115 at 4 µA offers the lowest standby power, while the 74LVC1G11FZ4-7 at 40 µA consumes more. Selection depends on application power budget requirements. All values remain acceptable for standard logic applications.

Q: Are all substitute parts RoHS3 compliant?

A: Yes. All three parts carry ROHS3 compliance certification and REACH unaffected status, meeting environmental and regulatory requirements for industrial and commercial applications.

Q: What packaging considerations apply when substituting parts?

A: Physical package dimensions and pin configurations differ between 6-SON, X2-DFN1410-6, and 6-XSON variants. PCB footprint, solder pad layout, and component placement must accommodate the selected package type. Consult manufacturer datasheets for precise dimensional specifications before PCB design finalization.