SN74LVC07ARGYRG4 Equivalent & Substitute Parts

Part Overview

The SN74LVC07ARGYRG4 is a non-inverting buffer logic integrated circuit manufactured by Texas Instruments, designed for 6-element, 1-bit-per-element configurations with open drain output capability. This device operates across a supply voltage range of 1.65V to 5.5V and is housed in a 14-VQFN package with exposed pad.

The SN74LVC07ARGYRG4 is currently discontinued at DiGi Electronics. Identifying equivalent substitute parts is necessary to maintain design continuity and ensure component availability for production and maintenance applications.

Substiute Parts

SN74LVC07ARGYRG4

Texas InstrumentsIn Stock: 1085SN74LVC07ARGYRG4 Datasheet

Current PartRFQ

SN74LVC07ARGYR

Texas InstrumentsIn Stock: 38265SN74LVC07ARGYR Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the SN74LVC07ARGYRG4 are identified based on strict parametric equivalence across the following critical criteria:

• Logic function: Non-inverting buffer with 6 elements, 1 bit per element
• Output configuration: Open drain topology
• Electrical performance: 24mA output low current, 1.65V to 5.5V supply voltage range
• Temperature rating: -40°C to 125°C operating range
• Package specification: 14-VFQFN with exposed pad
• Manufacturing standard: ROHS3 compliance and MSL 2 rating

The SN74LVC07ARGYR meets all parametric requirements for direct substitution with the discontinued SN74LVC07ARGYRG4. The primary distinction is packaging format and product status availability.

Parameter Comparison

Engineering Selection Recommendations

The SN74LVC07ARGYR is the direct parametric equivalent for the discontinued SN74LVC07ARGYRG4. Both parts share identical electrical specifications, thermal ratings, and package geometry. The substitute part maintains full ROHS3 compliance and MSL 2 moisture sensitivity classification.

Selection of the SN74LVC07ARGYR is supported by its active product status, ensuring ongoing availability and supply chain continuity. The packaging format difference (Cut Tape & Digi-Reel versus the original specification) does not affect functional or mechanical compatibility in standard PCB assembly processes.

Frequently Asked Questions (FAQ)

Q: Can the SN74LVC07ARGYR be used as a direct replacement for the SN74LVC07ARGYRG4?

A: Yes. Both parts are parametrically identical across all critical specifications: logic function, output type, electrical performance, temperature range, package geometry, and compliance certifications. The substitute part is functionally and mechanically compatible.

Q: What is the difference between the SN74LVC07ARGYRG4 and SN74LVC07ARGYR?

A: The primary difference is packaging format. The SN74LVC07ARGYRG4 was supplied in a specific packaging configuration, while the SN74LVC07ARGYR is available in Cut Tape and Digi-Reel formats. Electrical and mechanical specifications are identical.

Q: Are there any compliance or certification differences?

A: No. Both parts maintain ROHS3 compliance and MSL 2 moisture sensitivity rating. All regulatory and environmental certifications are equivalent.

Q: What is the 14-VFQFN package specification?

A: The 14-VFQFN is a very fine pitch quad flat no-lead package measuring 4.6mm x 4.6mm with an exposed thermal pad. This package is suitable for surface mount assembly on standard PCB equipment.

Q: Is the SN74LVC07ARGYR currently in stock?

A: Yes. The SN74LVC07ARGYR maintains active product status with 38,200 pieces available in new original inventory, providing reliable supply availability compared to the discontinued SN74LVC07ARGYRG4.