SN74LVC07ADRG3 Equivalent & Substitute Parts

Part Overview

The SN74LVC07ADRG3 is a non-inverting buffer logic IC manufactured by Texas Instruments, featuring 6 elements with open drain output configuration in a 14-SOIC package. This device operates across a wide supply voltage range of 1.65V to 5.5V and maintains active product status with full RoHS3 compliance. Equivalent and substitute parts are identified to support procurement flexibility, inventory management, and design continuity across multiple manufacturers while maintaining electrical and mechanical compatibility.

Substiute Parts

SN74LVC07ADRG3

Texas InstrumentsIn Stock: 3326SN74LVC07ADRG3 Datasheet

Current PartRFQ

SN74LVC07ADR

Texas InstrumentsIn Stock: 5121SN74LVC07ADR Datasheet

Parametric EquivalentRFQ

SN74LVC07ADT

Texas InstrumentsIn Stock: 1552SN74LVC07ADT Datasheet

Parametric EquivalentRFQ

74LVC07AD,118

Nexperia USA Inc.In Stock: 770674LVC07AD,118 Datasheet

MFR RecommendedRFQ

74LVC07AS14-13

Diodes IncorporatedIn Stock: 5658874LVC07AS14-13 Datasheet

MFR RecommendedRFQ

MC74LCX07DG

onsemiIn Stock: 1823MC74LCX07DG Datasheet

MFR RecommendedRFQ

MC74LCX07DR2G

onsemiIn Stock: 2278MC74LCX07DR2G Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the SN74LVC07ADRG3 are classified based on strict electrical and mechanical parameter alignment. The primary substitution criteria are:

Core Compatibility Parameters:

• Logic Type: Buffer, Non-Inverting (all substitutes match)
• Number of Elements: 6 (all substitutes match)
• Output Type: Open Drain (all substitutes match)
• Package / Case: 14-SOIC form factor (all substitutes match)
• Mounting Type: Surface Mount (all substitutes match)

Electrical Operating Range:

• Supply Voltage: Minimum 1.65V to 5.5V maximum (primary range)
• Output Current - Low: 24mA or higher (all substitutes meet or exceed)
• Operating Temperature: -40°C to 125°C (primary range)

Compliance & Status:

• RoHS3 Compliant (all substitutes)
• Active Product Status (all substitutes)
• MSL Level 1 (all substitutes)

Substitutes are grouped into two categories: Parametric Equivalents (identical electrical specifications and packaging from Texas Instruments) and Manufacturer Recommended alternatives (functionally equivalent from alternative manufacturers with minor parameter variations within acceptable tolerances).

Parameter Comparison

Engineering Selection Recommendations

Texas Instruments 74LVC Series (SN74LVC07ADR, SN74LVC07ADT): These parts are parametric equivalents to the SN74LVC07ADRG3, differing only in packaging format (Cut Tape vs. Tape & Reel). Both maintain identical electrical specifications and full compliance status. Selection between these and the primary part depends on procurement packaging requirements and inventory availability.

Nexperia USA Inc. 74LVC07AD,118: This substitute offers enhanced output current capability (32mA vs. 24mA) and extended lower supply voltage range (1.2V minimum vs. 1.65V). It maintains the full operating temperature range and RoHS3 compliance. This part is suitable for applications requiring lower voltage operation or higher output drive capability.

Diodes Incorporated 74LVC07AS14-13: This substitute provides 32mA output current and maintains the 1.65V to 5.5V supply range with full temperature range operation. Highest inventory availability (56,564 pcs) supports procurement continuity. RoHS3 and compliance certifications are equivalent to the primary part.

onsemi 74LCX Series (MC74LCX07DG, MC74LCX07DR2G): These substitutes operate within a narrower supply voltage range (2V to 5.5V) and reduced operating temperature range (-40°C to 85°C). Selection of these parts requires verification that application requirements fall within these reduced operating parameters. Both maintain 24mA output current and RoHS3 compliance.

Frequently Asked Questions (FAQ)

Q: Can SN74LVC07ADR be used as a direct replacement for SN74LVC07ADRG3?

A: Yes. SN74LVC07ADR is a parametric equivalent with identical electrical specifications (24mA output current, 1.65V to 5.5V supply range, -40°C to 125°C operating temperature). The only difference is packaging format: SN74LVC07ADR is supplied in Cut Tape & Digi-Reel format, while SN74LVC07ADRG3 is Tape & Reel. Both use the 14-SOIC package and are functionally interchangeable.

Q: What is the difference between the 74LVC and 74LCX series substitutes?

A: The 74LCX series (MC74LCX07DG, MC74LCX07DR2G) operates within a narrower supply voltage range (2V to 5.5V minimum vs. 1.65V) and reduced operating temperature range (-40°C to 85°C vs. -40°C to 125°C). These parts are suitable only for applications that do not require operation below 2V supply voltage or above 85°C ambient temperature.

Q: Why do some substitutes have higher output current ratings (32mA vs. 24mA)?

A: The Nexperia USA Inc. 74LVC07AD,118 and Diodes Incorporated 74LVC07AS14-13 provide 32mA output current capability compared to 24mA in the primary part. This represents enhanced drive capability and does not affect compatibility; applications designed for 24mA operation remain fully compatible with these higher-rated substitutes.

Q: Are all substitute parts RoHS3 compliant?

A: Yes. All listed substitute parts maintain RoHS3 compliance status, matching the primary SN74LVC07ADRG3 part. All parts also carry MSL Level 1 (Unlimited) moisture sensitivity rating and REACH Unaffected status.

Q: What packaging options are available for substitutes?

A: Substitute parts are available in three packaging formats: Tape & Reel (TR), Cut Tape & Digi-Reel (CT), and Tube. Selection depends on procurement and assembly requirements. All maintain the 14-SOIC form factor for mechanical compatibility.

Q: Can MC74LCX07DG or MC74LCX07DR2G be used in applications requiring operation below 2V supply voltage?

A: No. The onsemi 74LCX series specifies a minimum supply voltage of 2V. Applications requiring operation at 1.65V or lower must use Texas Instruments 74LVC series parts or the Nexperia/Diodes alternatives that support the full 1.65V minimum range.