SN74HC4066DT Equivalent & Substitute Parts

Part Overview

The SN74HC4066DT is a 4-circuit SPST-NO analog switch IC manufactured by Texas Instruments in 14-SOIC surface mount packaging. This device functions as a general-purpose analog switch with 30Ohm typical on-state resistance, operating across a 2V to 6V single supply range. The part is designated as Last Time Buy status, indicating limited availability from the original manufacturer. Equivalent and substitute parts are necessary to ensure design continuity, maintain supply chain flexibility, and accommodate varying application requirements such as extended temperature ranges, improved performance characteristics, or alternative packaging formats.

Key Parameters

Parameter	SN74HC4066DT
Manufacturer	Texas Instruments
Switch Circuit Type	SPST - NO
Number of Circuits	4
On-State Resistance (Max)	30Ohm (Typ)
Multiplexer/Demultiplexer Circuit	1:1
Voltage - Supply, Single (V+)	2V ~ 6V
Switch Time (Ton, Toff) (Max)	31ns, 34ns
-3dB Bandwidth	30MHz
Channel Capacitance (CS(off), CD(off))	0.5pF, 9pF
Current - Leakage (IS(off)) (Max)	100nA
Crosstalk	-45dB @ 1MHz
Operating Temperature	-40°C ~ 85°C (TA)
Package / Case	14-SOIC (0.154", 3.90mm Width)
Mounting Type	Surface Mount
RoHS Status	ROHS3 Compliant
Moisture Sensitivity Level (MSL)	1 (Unlimited)

Substitute Part Grouping Explanation

Substitution eligibility for the SN74HC4066DT is determined by the following critical parameters:

Mandatory Compatibility Criteria:

Switch circuit type: SPST - NO
Number of circuits: 4
Multiplexer/Demultiplexer circuit: 1:1
Package / Case: 14-SOIC (0.154", 3.90mm Width)
Mounting type: Surface Mount

Performance Tolerance Parameters:

On-state resistance must not exceed application requirements (SN74HC4066DT baseline: 30Ohm typical)
Supply voltage range must encompass or exceed the 2V ~ 6V requirement
Operating temperature range must cover -40°C ~ 85°C minimum
Leakage current and crosstalk specifications must meet or exceed performance levels

Substitute parts are grouped into three categories based on their relationship to the main part:

Parametric Equivalent: SN74HC4066DR shares identical electrical specifications with SN74HC4066DT but differs only in packaging format (Cut Tape & Digi-Reel® versus Tape & Reel).

Direct Manufacturer Substitutes: MC74HC4066ADR2G (onsemi), 74HC4066D,653 (Nexperia), 74HCT4066D-Q100,11 (Nexperia), HEF4066BT,653 (Nexperia), and MAX4066 series (Analog Devices/Maxim) maintain the same functional architecture but with variations in on-state resistance, supply voltage range, and performance characteristics.

Performance Trade-offs: Higher on-state resistance (70Ohm to 155Ohm) or extended supply voltage ranges (up to 16V) may be acceptable depending on circuit requirements, provided switching speed, bandwidth, and leakage specifications remain within acceptable limits.

Parameter Comparison

Part Number	Manufacturer	On-State Resistance (Max)	Voltage - Supply, Single (V+)	Switch Time Ton/Toff (Max)	-3dB Bandwidth	Operating Temperature	Crosstalk	Current - Leakage (IS(off)) (Max)	Package	Product Status
SN74HC4066DT	Texas Instruments	30Ohm (Typ)	2V ~ 6V	31ns, 34ns	30MHz	-40°C ~ 85°C	-45dB @ 1MHz	100nA	14-SOIC	Last Time Buy
SN74HC4066DR	Texas Instruments	30Ohm (Typ)	2V ~ 6V	31ns, 34ns	30MHz	-40°C ~ 85°C	-45dB @ 1MHz	100nA	14-SOIC	Last Time Buy
MC74HC4066ADR2G	onsemi	70Ohm	2V ~ 12V	—	160MHz	-55°C ~ 125°C	-80dB @ 1MHz	100nA	14-SOIC	Active
74HC4066D,653	Nexperia USA Inc.	95Ohm	2V ~ 10V	30ns, 20ns	200MHz	-40°C ~ 125°C	-60dB @ 1MHz	1µA	14-SOIC	Active
74HCT4066D-Q100,11	Nexperia USA Inc.	20Ohm (Typ)	4.5V ~ 5.5V	44ns, 30ns	200MHz	-40°C ~ 125°C	-60dB @ 1MHz	1µA	14-SOIC	Active
HEF4066BT,653	Nexperia USA Inc.	155Ohm	3V ~ 15V	—	90MHz	-40°C ~ 125°C	-50dB @ 1MHz	200nA	14-SOIC	Active
MAX4066ACSD+	Analog Devices Inc./Maxim Integrated	45Ohm	2V ~ 16V	100ns, 75ns	100MHz	0°C ~ 70°C	-86dB @ 1MHz	100pA	14-SOIC	Active
MAX4066ACSD+T	Analog Devices Inc./Maxim Integrated	45Ohm	2V ~ 16V	100ns, 75ns	100MHz	0°C ~ 70°C	-86dB @ 1MHz	100pA	14-SOIC	Active
MAX4066AESD+	Analog Devices Inc./Maxim Integrated	45Ohm	2V ~ 16V	100ns, 75ns	100MHz	-40°C ~ 85°C	-86dB @ 1MHz	100pA	14-SOIC	Active
MAX4066AESD+T	Analog Devices Inc./Maxim Integrated	45Ohm	2V ~ 16V	100ns, 75ns	100MHz	-40°C ~ 85°C	-86dB @ 1MHz	100pA	14-SOIC	Active
MAX4066CSD+	Analog Devices Inc./Maxim Integrated	45Ohm	2V ~ 16V	100ns, 75ns	100MHz	0°C ~ 70°C	-86dB @ 1MHz	1nA	14-SOIC	Active

Engineering Selection Recommendations

Direct Replacement (Identical Specifications): SN74HC4066DR is the direct equivalent to SN74HC4066DT, differing only in packaging format. Both parts are Last Time Buy status from Texas Instruments and maintain identical electrical performance. Selection between these two depends solely on packaging requirements: Tape & Reel (TR) for SN74HC4066DT or Cut Tape & Digi-Reel® for SN74HC4066DR.

Active Status Alternatives with Comparable Performance: MC74HC4066ADR2G (onsemi) and MAX4066AESD+T (Analog Devices/Maxim) are Active status parts suitable for applications where extended supply voltage range or improved temperature coverage is beneficial. MC74HC4066ADR2G extends supply voltage to 12V and operating temperature to -55°C ~ 125°C, while MAX4066AESD+T maintains the -40°C ~ 85°C temperature range with extended supply voltage to 16V. Both parts carry higher on-state resistance (70Ohm and 45Ohm respectively) compared to the SN74HC4066DT baseline of 30Ohm.

High-Performance Alternatives: 74HC4066D,653 (Nexperia) offers superior bandwidth (200MHz versus 30MHz) and improved crosstalk performance (-60dB versus -45dB @ 1MHz) with Active status and extended temperature range (-40°C ~ 125°C). The trade-off is increased on-state resistance (95Ohm) and leakage current (1µA).

TTL-Compatible Option: 74HCT4066D-Q100,11 (Nexperia) is qualified to AEC-Q100 automotive standard with the lowest on-state resistance (20Ohm typical) among all substitutes. This part requires a narrower supply voltage range (4.5V ~ 5.5V) and is suitable for TTL-level logic applications.

Wide Supply Voltage Applications: HEF4066BT,653 (Nexperia) supports the widest supply voltage range (3V ~ 15V) and is appropriate for applications requiring operation across extended voltage domains. Higher on-state resistance (155Ohm) and reduced bandwidth (90MHz) are trade-offs for this flexibility.

Low-Leakage Applications: MAX4066CSD+ (Analog Devices/Maxim) provides the lowest leakage current (1nA) among all substitutes, suitable for precision analog switching applications where leakage minimization is critical. Operating temperature range is limited to 0°C ~ 70°C.

All substitute parts maintain ROHS3 compliance, MSL 1 rating, and 14-SOIC package compatibility with the original SN74HC4066DT.

Frequently Asked Questions (FAQ)

Q: Can SN74HC4066DR be used as a direct replacement for SN74HC4066DT? A: Yes. SN74HC4066DR is a parametric equivalent with identical electrical specifications. The only difference is packaging format: SN74HC4066DT is supplied in Tape & Reel (TR) format, while SN74HC4066DR is supplied in Cut Tape & Digi-Reel® format. Selection depends on your assembly process requirements.

Q: What is the primary reason to consider substitutes for SN74HC4066DT? A: SN74HC4066DT is designated Last Time Buy status, indicating limited future availability from Texas Instruments. Active status alternatives ensure long-term supply chain continuity and design sustainability.

Q: Which substitute offers the closest electrical match to SN74HC4066DT? A: MC74HC4066ADR2G (onsemi) and MAX4066AESD+T (Analog Devices/Maxim) are the closest matches. MC74HC4066ADR2G extends supply voltage to 12V and temperature range to -55°C ~ 125°C. MAX4066AESD+T maintains the -40°C ~ 85°C temperature range while extending supply voltage to 16V. Both are Active status parts with established supply availability.

Q: Does on-state resistance variation affect circuit compatibility? A: On-state resistance affects signal attenuation and power dissipation in analog switching applications. SN74HC4066DT specifies 30Ohm typical. Substitutes range from 20Ohm (74HCT4066D-Q100,11) to 155Ohm (HEF4066BT,653). Higher resistance values may introduce signal loss in high-impedance circuits or increase switching noise. Verify that your application can tolerate the resistance value of the selected substitute.

Q: Are all substitutes compatible with the same PCB footprint? A: Yes. All listed substitutes use the 14-SOIC (0.154", 3.90mm Width) package, which is mechanically and electrically compatible with SN74HC4066DT. No PCB redesign is required for package compatibility.

Q: Which substitute is suitable for automotive applications? A: 74HCT4066D-Q100,11 (Nexperia) is qualified to AEC-Q100 automotive standard and carries the Automotive grade designation. This part is appropriate for automotive-grade designs requiring formal qualification documentation.

Q: What is the difference between MAX4066AESD+ and MAX4066AESD+T? A: Both parts are electrically identical with 45Ohm on-state resistance and -40°C ~ 85°C operating temperature. The difference is packaging format: MAX4066AESD+ is supplied in Tube format, while MAX4066AESD+T is supplied in Tape & Reel (TR) format. Selection depends on assembly process requirements.

Q: Can I use HEF4066BT,653 in a 2V ~ 6V supply application? A: Yes. HEF4066BT,653 supports supply voltage from 3V ~ 15V, which encompasses the 2V ~ 6V range of SN74HC4066DT. However, the minimum supply voltage is 3V, not 2V. If your application requires operation below 3V, HEF4066BT,653 is not suitable.

Q: Which substitute provides the best crosstalk performance? A: MAX4066AESD+T and MAX4066ACSD+T both provide -86dB crosstalk @ 1MHz, which is superior to SN74HC4066DT (-45dB @ 1MHz). This improved isolation is beneficial for multi-channel analog switching applications where channel-to-channel interference must be minimized.

Q: Are all substitutes RoHS3 compliant? A: Yes. All listed substitute parts are RoHS3 compliant and carry MSL 1 (Unlimited) moisture sensitivity rating, matching the environmental compliance profile of SN74HC4066DT.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message