SN65MLVD206DR LVDS Transceiver Half Equivalent & Substitute Parts

Part Overview

The SN65MLVD206DR is an active LVDS (Low-Voltage Differential Signaling) transceiver half manufactured by Texas Instruments, designed for multipoint communication applications. This interface IC operates as a 1/1 transceiver (one driver and one receiver) in half-duplex mode, supporting data rates up to 200 Mbps. The device is classified as Active product status and is ROHS3 compliant. Equivalent and substitute parts are identified when they maintain identical electrical specifications, mechanical compatibility, and functional performance within the same package footprint and operating parameters.

Substiute Parts

SN65MLVD206DR

Texas InstrumentsIn Stock: 4396SN65MLVD206DR Datasheet

Current PartRFQ

SN65MLVD201DR

Texas InstrumentsIn Stock: 7296SN65MLVD201DR Datasheet

Parametric EquivalentRFQ

SN65MLVD206BDR

Texas InstrumentsIn Stock: 5117SN65MLVD206BDR Datasheet

Parametric EquivalentRFQ

NB3N201SDR2G

onsemiIn Stock: 894NB3N201SDR2G Datasheet

Parametric EquivalentRFQ

NB3N206SDR2G

onsemiIn Stock: 16711NB3N206SDR2G Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the SN65MLVD206DR are qualified based on strict parametric equivalence across the following critical criteria:

Electrical Equivalence Requirements:

• Protocol: LVDS, Multipoint
• Driver/Receiver Configuration: 1/1
• Duplex Mode: Half
• Data Rate: 200 Mbps
• Receiver Hysteresis: 25 mV
• Supply Voltage Range: 3V to 3.6V
• Operating Temperature Range: -40°C to 85°C

Mechanical Compatibility Requirements:

• Package Type: 8-SOIC
• Package Dimensions: 0.154" width (3.90mm)
• Mounting Type: Surface Mount

Compliance Requirements:

• RoHS3 Compliance
• MSL Rating: 1 (Unlimited)

All identified substitute parts maintain these parameters without deviation. Substitution is valid when the complete electrical specification, package footprint, and environmental operating range are identical to the main part.

Parameter Comparison

Engineering Selection Recommendations

All identified substitute parts maintain full parametric equivalence to the SN65MLVD206DR and are suitable for direct replacement in applications requiring LVDS multipoint half-duplex transceiver functionality.

Texas Instruments Substitutes:

• SN65MLVD201DR: Parametric equivalent with Tape & Reel packaging. Inventory availability: 7245 units.
• SN65MLVD206BDR: Parametric equivalent with Cut Tape & Digi-Reel packaging. Inventory availability: 5100 units. ECCN classification differs (EAR99 vs. 5A991B1).

onsemi Substitutes:

• NB3N201SDR2G: Parametric equivalent with Tape & Reel packaging. Inventory availability: 828 units. ECCN classification: EAR99.
• NB3N206SDR2G: Parametric equivalent with Tape & Reel packaging. Inventory availability: 16691 units. ECCN classification: EAR99.

All substitute parts are Active product status and ROHS3 compliant. Selection between substitutes should be based on packaging requirements, inventory availability, and export control classification needs for the application.

Frequently Asked Questions (FAQ)

Q: Can SN65MLVD201DR replace SN65MLVD206DR? A: Yes. Both parts are Texas Instruments LVDS multipoint half-duplex transceivers with identical electrical specifications (1/1 configuration, 200 Mbps data rate, 25 mV receiver hysteresis, 3V to 3.6V supply, -40°C to 85°C operating range) and 8-SOIC package footprint. The primary difference is packaging format: SN65MLVD201DR is supplied in Tape & Reel, while SN65MLVD206DR is supplied in Cut Tape & Digi-Reel.

Q: What is the difference between SN65MLVD206DR and SN65MLVD206BDR? A: Both parts are identical in electrical performance and package type (8-SOIC). The difference is in ECCN export control classification: SN65MLVD206DR is classified as 5A991B1, while SN65MLVD206BDR is classified as EAR99. Selection depends on export compliance requirements for your application.

Q: Are onsemi NB3N parts compatible with Texas Instruments SN65MLVD parts? A: Yes. NB3N201SDR2G and NB3N206SDR2G are parametric equivalents to the SN65MLVD series. All electrical specifications, package dimensions, and operating parameters are identical. Both manufacturers' parts are ROHS3 compliant with MSL 1 rating and support the same LVDS multipoint protocol at 200 Mbps.

Q: Does packaging format affect electrical performance? A: No. Cut Tape & Digi-Reel and Tape & Reel packaging formats contain identical die and electrical performance. Packaging selection is based on assembly process requirements and inventory management practices.

Q: What is the significance of MSL 1 (Unlimited) rating? A: MSL 1 indicates the component has unlimited shelf life and does not require special moisture control during storage or handling. This simplifies logistics and reduces storage constraints compared to higher MSL ratings.

Q: Can these parts be used interchangeably in production? A: Yes, all substitute parts maintain identical electrical specifications, package footprint, and environmental operating ranges. Direct substitution is valid without circuit modification or re-qualification when all parametric requirements are met.