SN65MLVD205DR Equivalent & Substitute Parts

Part Overview

The SN65MLVD205DR is a 1/1 transceiver with full-duplex LVDS multipoint capability in a 14-SOIC surface mount package. This part is classified as obsolete, making equivalent substitute parts necessary for ongoing production and maintenance applications. The device operates at 100 Mbps data rate with 3V to 3.6V supply voltage and maintains full electrical and mechanical compatibility across the substitute options listed.

Key Parameters

Parameter	Value
Manufacturer	Texas Instruments
Category	Interface
Type	Transceiver
Protocol	LVDS, Multipoint
Number of Drivers/Receivers	1/1
Duplex	Full
Data Rate	100 Mbps
Receiver Hysteresis	25 mV
Voltage - Supply	3V ~ 3.6V
Operating Temperature	-40°C ~ 85°C
Mounting Type	Surface Mount
Package / Case	14-SOIC (0.154", 3.90mm Width)
RoHS Status	ROHS3 Compliant
Moisture Sensitivity Level (MSL)	1 (Unlimited)

Substitute Part Grouping Explanation

Substitution eligibility for the SN65MLVD205DR is determined by strict equivalence across the following parameters:

Protocol: LVDS, Multipoint
Number of Drivers/Receivers: 1/1
Duplex: Full
Data Rate: 100 Mbps
Receiver Hysteresis: 25 mV
Voltage - Supply: 3V ~ 3.6V
Operating Temperature: -40°C ~ 85°C
Package / Case: 14-SOIC (0.154", 3.90mm Width)
RoHS Status: ROHS3 Compliant
Moisture Sensitivity Level: 1 (Unlimited)

All three substitute parts—SN65MLVD202ADR, SN65MLVD202DR, and SN65MLVD205ADR—meet these electrical and mechanical requirements. Differences in product status and packaging format (Tape & Reel versus standard packaging) do not affect functional equivalence.

Parameter Comparison

Parameter	SN65MLVD205DR (Main)	SN65MLVD202ADR	SN65MLVD202DR	SN65MLVD205ADR
Manufacturer	Texas Instruments	Texas Instruments	Texas Instruments	Texas Instruments
Type	Transceiver	Transceiver	Transceiver	Transceiver
Protocol	LVDS, Multipoint	LVDS, Multipoint	LVDS, Multipoint	LVDS, Multipoint
Number of Drivers/Receivers	1/1	1/1	1/1	1/1
Duplex	Full	Full	Full	Full
Data Rate	100 Mbps	100 Mbps	100 Mbps	100 Mbps
Receiver Hysteresis	25 mV	25 mV	25 mV	25 mV
Voltage - Supply	3V ~ 3.6V	3V ~ 3.6V	3V ~ 3.6V	3V ~ 3.6V
Operating Temperature	-40°C ~ 85°C	-40°C ~ 85°C	-40°C ~ 85°C	-40°C ~ 85°C
Mounting Type	Surface Mount	Surface Mount	Surface Mount	Surface Mount
Package / Case	14-SOIC (0.154", 3.90mm Width)	14-SOIC (0.154", 3.90mm Width)	14-SOIC (0.154", 3.90mm Width)	14-SOIC (0.154", 3.90mm Width)
RoHS Status	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant
Moisture Sensitivity Level (MSL)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)
Product Status	Obsolete	Active	Not For New Designs	Active
Packaging Format	Standard	Standard	Tape & Reel (TR)	Tape & Reel (TR)

Engineering Selection Recommendations

For applications currently using the SN65MLVD205DR, the SN65MLVD205ADR is the primary recommended substitute. This part maintains active product status with Texas Instruments, ensuring long-term availability and support. The SN65MLVD205ADR is available in Tape & Reel packaging format and has the highest inventory level (11,694 pcs) among all substitutes.

The SN65MLVD202ADR is an alternative active substitute with equivalent electrical specifications and standard packaging availability. This part also maintains active status and provides 2,428 pcs in inventory.

The SN65MLVD202DR is classified as "Not For New Designs" and should be used only for maintenance of existing systems where the original part number is no longer available. This part is available in Tape & Reel format with 4,202 pcs in inventory.

All three substitutes are ROHS3 compliant and REACH unaffected, meeting current environmental and regulatory requirements.

Frequently Asked Questions (FAQ)

Q: Can SN65MLVD202ADR be used as a direct replacement for SN65MLVD205DR?

A: Yes. Both parts are electrically and mechanically equivalent. They share identical protocol (LVDS, Multipoint), driver/receiver configuration (1/1), data rate (100 Mbps), supply voltage (3V ~ 3.6V), operating temperature range (-40°C ~ 85°C), and 14-SOIC package specifications. The primary difference is product status; SN65MLVD202ADR is active while SN65MLVD205DR is obsolete.

Q: What is the difference between standard packaging and Tape & Reel (TR) format?

A: Tape & Reel packaging is used for automated assembly processes and high-volume production. Standard packaging is used for manual assembly or lower-volume applications. Both formats contain identical components with the same electrical and mechanical specifications. Selection depends on your assembly process requirements.

Q: Why is SN65MLVD202DR marked "Not For New Designs"?

A: This designation indicates the part is in the mature phase of its product lifecycle. While it remains functionally equivalent and available in inventory, Texas Instruments recommends using active alternatives for new designs. It remains suitable for maintenance and replacement applications.

Q: Are all substitutes ROHS3 compliant?

A: Yes. All listed substitutes—SN65MLVD202ADR, SN65MLVD202DR, and SN65MLVD205ADR—are ROHS3 compliant with Moisture Sensitivity Level 1 (Unlimited), meeting current environmental and regulatory standards.

Q: Which substitute has the best availability?

A: SN65MLVD205ADR has the highest inventory level at 11,694 pcs, followed by SN65MLVD202DR at 4,202 pcs, and SN65MLVD202ADR at 2,428 pcs.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message