SN65MLVD205D LVDS Transceiver Equivalent & Substitute Parts

Part Overview

The SN65MLVD205D is a full-duplex LVDS transceiver manufactured by Texas Instruments, designed for multipoint low-voltage differential signaling applications. This interface IC operates at 100 Mbps data rate with 1/1 driver/receiver configuration in a 14-SOIC surface mount package. The part is currently classified as "Not For New Designs," making identification of active equivalent and substitute parts essential for ongoing production support and design continuity.

Key Parameters

Parameter	Value
Manufacturer Part Number	SN65MLVD205D
Manufacturer	Texas Instruments
Category	Interface
Type	Transceiver
Protocol	LVDS, Multipoint
Number of Drivers/Receivers	1/1
Duplex	Full
Data Rate	100 Mbps
Receiver Hysteresis	25 mV
Voltage - Supply	3V ~ 3.6V
Operating Temperature	-40°C ~ 85°C
Mounting Type	Surface Mount
Package / Case	14-SOIC (0.154", 3.90mm Width)
RoHS Status	ROHS3 Compliant
Moisture Sensitivity Level (MSL)	1 (Unlimited)
REACH Status	REACH Unaffected
Product Status	Not For New Designs

Substitute Part Grouping Explanation

Substitution of the SN65MLVD205D is determined by strict equivalence across the following critical parameters:

Protocol and functionality: LVDS, Multipoint configuration
Driver/Receiver configuration: 1/1 topology
Duplex mode: Full-duplex operation
Electrical performance: 100 Mbps data rate, 25 mV receiver hysteresis
Power supply: 3V ~ 3.6V operating range
Temperature range: -40°C ~ 85°C
Package: 14-SOIC form factor with identical 0.154" (3.90mm) width
Compliance: ROHS3, REACH Unaffected, MSL 1

All identified substitute parts maintain these parameters identically. Substitution differences are limited to product status classification and packaging designation (tube packaging maintained across all variants).

Parameter Comparison

Parameter	SN65MLVD205D	SN65MLVD205AD	SN65MLVD202AD	SN65MLVD202D
Manufacturer	Texas Instruments	Texas Instruments	Texas Instruments	Texas Instruments
Protocol	LVDS, Multipoint	LVDS, Multipoint	LVDS, Multipoint	LVDS, Multipoint
Drivers/Receivers	1/1	1/1	1/1	1/1
Duplex	Full	Full	Full	Full
Data Rate	100 Mbps	100 Mbps	100 Mbps	100 Mbps
Receiver Hysteresis	25 mV	25 mV	25 mV	25 mV
Supply Voltage	3V ~ 3.6V	3V ~ 3.6V	3V ~ 3.6V	3V ~ 3.6V
Operating Temperature	-40°C ~ 85°C	-40°C ~ 85°C	-40°C ~ 85°C	-40°C ~ 85°C
Package	14-SOIC	14-SOIC	14-SOIC	14-SOIC
RoHS Status	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant
MSL	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)
REACH Status	REACH Unaffected	REACH Unaffected	REACH Unaffected	REACH Unaffected
Product Status	Not For New Designs	Active	Active	Not For New Designs
Inventory (Pcs)	826	2100	1900	3485

Engineering Selection Recommendations

For applications currently using SN65MLVD205D, the following selection criteria apply:

SN65MLVD205AD is the direct pin-compatible and functionally equivalent substitute with Active product status. This part maintains identical electrical specifications and package configuration while offering current manufacturing support and availability.

SN65MLVD202AD provides parametric equivalence with Active product status. The base product number differs (65MLVD202 versus 65MLVD205), but all critical electrical and mechanical parameters remain identical. This part is suitable for applications where the specific base product variant is not a design constraint.

SN65MLVD202D offers parametric equivalence but carries "Not For New Designs" status, similar to the original SN65MLVD205D. Selection of this part should be limited to legacy production support where design continuity is required.

For new designs, SN65MLVD205AD or SN65MLVD202AD are the recommended selections due to Active product status and full manufacturing support.

Frequently Asked Questions (FAQ)

Q: Can SN65MLVD205AD be used as a direct replacement for SN65MLVD205D?

A: Yes. SN65MLVD205AD is a direct substitute with identical electrical specifications, package configuration, and pin assignment. The only difference is product status (Active versus Not For New Designs).

Q: What is the difference between SN65MLVD205 and SN65MLVD202 base product numbers?

A: The base product numbers differ, but all provided electrical and mechanical parameters are identical across both variants. Both support 1/1 full-duplex LVDS multipoint transceiver functionality at 100 Mbps with 3V ~ 3.6V supply and 14-SOIC packaging.

Q: Are all substitute parts in the same 14-SOIC package?

A: Yes. All parts listed maintain the 14-SOIC (0.154", 3.90mm Width) surface mount package with identical pinout and mechanical dimensions.

Q: Which substitute part has the highest current inventory?

A: SN65MLVD202D has the highest inventory at 3485 pieces. SN65MLVD205AD has 2100 pieces, and SN65MLVD202AD has 1900 pieces.

Q: Are all parts ROHS3 compliant?

A: Yes. All listed parts are ROHS3 Compliant with MSL 1 (Unlimited) and REACH Unaffected status.

Q: Should I use parts marked "Not For New Designs"?

A: Parts marked "Not For New Designs" (SN65MLVD205D and SN65MLVD202D) are suitable for legacy production support and design continuity. For new designs, select parts with Active status: SN65MLVD205AD or SN65MLVD202AD.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message