SN65MLVD204DR LVDS Transceiver Half Equivalent & Substitute Parts

Part Overview

The SN65MLVD204DR is a 1/1 transceiver half LVDS multipoint interface IC manufactured by Texas Instruments in an 8-SOIC surface mount package. This device is classified as "Not For New Designs," indicating it has reached end-of-life status. The part operates at 3V to 3.6V supply voltage with a 100 Mbps data rate and supports half-duplex LVDS multipoint communication with 25 mV receiver hysteresis. Due to its discontinued design status, identifying parametrically equivalent active alternatives is essential for ongoing production support and new design initiatives.

Substiute Parts

SN65MLVD204DR

Texas InstrumentsIn Stock: 3479SN65MLVD204DR Datasheet

Current PartRFQ

SN65MLVD200ADR

Texas InstrumentsIn Stock: 1936SN65MLVD200ADR Datasheet

Parametric EquivalentRFQ

SN65MLVD204ADR

Texas InstrumentsIn Stock: 7746SN65MLVD204ADR Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the SN65MLVD204DR are identified based on strict parametric equivalence across the following critical specifications:

Substitution Criteria:

• Protocol: LVDS, Multipoint
• Number of Drivers/Receivers: 1/1 configuration
• Duplex Mode: Half
• Data Rate: 100 Mbps
• Supply Voltage Range: 3V ~ 3.6V
• Receiver Hysteresis: 25 mV
• Operating Temperature Range: -40°C ~ 85°C
• Package Type: 8-SOIC (0.154", 3.90mm Width)
• Mounting Type: Surface Mount
• Compliance: ROHS3 Compliant, REACH Unaffected

The identified substitute parts maintain identical electrical and mechanical specifications, ensuring direct functional compatibility in existing circuit designs. The primary distinction between the main part and substitutes is product status and packaging format availability.

Parameter Comparison

Engineering Selection Recommendations

SN65MLVD200ADR is recommended for new production and design initiatives. This part maintains active product status with Texas Instruments, ensuring long-term availability and supply chain stability. It carries identical electrical specifications and ROHS3 compliance certification. Current inventory of 1,900 units supports immediate procurement requirements.

SN65MLVD204ADR is recommended as a primary substitute for direct replacement applications. This part shares the same base product number as the original SN65MLVD204DR, indicating design continuity within the product line. Active product status guarantees ongoing manufacturer support. Higher inventory availability of 7,723 units provides superior supply chain flexibility. Cut Tape and Digi-Reel packaging formats accommodate both automated assembly and manual component handling workflows.

Both substitute parts satisfy REACH compliance requirements and maintain MSL Level 1 moisture sensitivity ratings, eliminating special storage or handling constraints.

Frequently Asked Questions (FAQ)

Q: Can SN65MLVD200ADR and SN65MLVD204ADR be used interchangeably with SN65MLVD204DR?

A: Yes. Both substitute parts maintain identical electrical parameters including protocol (LVDS multipoint), driver/receiver configuration (1/1), duplex mode (half), data rate (100 Mbps), supply voltage (3V to 3.6V), receiver hysteresis (25 mV), and operating temperature range (-40°C to 85°C). The 8-SOIC package dimensions and surface mount characteristics are identical, enabling direct PCB-level substitution.

Q: What is the difference between SN65MLVD200ADR and SN65MLVD204ADR?

A: The primary difference is the base product number designation (65MLVD200 versus 65MLVD204). Both parts are electrically and mechanically equivalent. SN65MLVD204ADR maintains design continuity with the original SN65MLVD204DR. Selection between these parts should be based on inventory availability and packaging format preference (Cut Tape and Digi-Reel options are available for both).

Q: Why is SN65MLVD204DR marked as "Not For New Designs"?

A: This designation indicates the part has reached end-of-life status within Texas Instruments' product portfolio. SN65MLVD200ADR and SN65MLVD204ADR are active alternatives that provide identical functionality with ongoing manufacturer support and guaranteed long-term availability.

Q: Are there any compliance or certification differences between these parts?

A: No. All three parts maintain ROHS3 compliance and REACH unaffected status. Moisture sensitivity level (MSL 1 - Unlimited) is identical across all variants, eliminating special handling or storage requirements.

Q: What packaging options are available for the substitute parts?

A: SN65MLVD200ADR and SN65MLVD204ADR are available in Cut Tape (CT) and Digi-Reel® formats, supporting both automated pick-and-place assembly and manual component distribution workflows. The original SN65MLVD204DR is available in standard packaging format.