SN65MLVD202ADR Equivalent & Substitute Parts

Part Overview

The SN65MLVD202ADR is a full-duplex LVDS multipoint transceiver manufactured by Texas Instruments, designed for low-voltage differential signaling applications requiring 1/1 driver/receiver configuration. This interface IC operates at 100 Mbps data rate with a 3V to 3.6V supply voltage range and is housed in a 14-SOIC surface mount package. The part is currently in active production status with 2428 units available in stock.

Substitute parts become necessary when the primary part number reaches end-of-life status, when alternative packaging formats are required for manufacturing processes, or when inventory constraints necessitate equivalent alternatives that maintain identical electrical and mechanical specifications.

Substiute Parts

SN65MLVD202ADR

Texas InstrumentsIn Stock: 2520SN65MLVD202ADR Datasheet

Current PartRFQ

SN65MLVD202DR

Texas InstrumentsIn Stock: 4303SN65MLVD202DR Datasheet

Parametric EquivalentRFQ

SN65MLVD205ADR

Texas InstrumentsIn Stock: 11707SN65MLVD205ADR Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the SN65MLVD202ADR is determined by strict equivalence across the following critical parameters:

• Protocol and configuration: LVDS, Multipoint with 1/1 driver/receiver topology
• Electrical performance: 100 Mbps data rate, 25 mV receiver hysteresis
• Power supply: 3V to 3.6V operating range
• Thermal specifications: -40°C to 85°C operating temperature
• Physical form factor: 14-SOIC package with 0.154" width (3.90mm)
• Compliance: ROHS3 compliant, MSL Level 1

The identified substitute parts maintain identical electrical and mechanical specifications. Differences exist only in packaging format (Tape & Reel versus bulk) and product lifecycle status. All substitute parts are manufactured by Texas Instruments and share the same base product architecture.

Parameter Comparison

Engineering Selection Recommendations

SN65MLVD202ADR (Primary Part): Recommended for new designs. Active product status ensures long-term availability and manufacturer support. Tube packaging is suitable for lower-volume applications and manual assembly processes.

SN65MLVD202DR (Packaging Equivalent): Functionally identical to the primary part with identical electrical specifications. Designated "Not For New Designs" status indicates potential future discontinuation. Tape & Reel packaging is optimized for high-volume automated assembly. Selection is appropriate only when Tape & Reel format is a manufacturing requirement and existing inventory of the primary part is unavailable.

SN65MLVD205ADR (Parametric Equivalent): Active product status with highest current inventory (11694 units). Maintains all critical electrical and mechanical parameters identical to SN65MLVD202ADR. Tape & Reel packaging format. Suitable for selection when inventory availability is a primary consideration or when automated assembly processes require Tape & Reel format.

Frequently Asked Questions (FAQ)

Q: Can SN65MLVD202DR be used as a direct replacement for SN65MLVD202ADR?

A: Yes. Both parts are electrically and mechanically identical with matching LVDS multipoint transceiver specifications, 100 Mbps data rate, and 14-SOIC package. The only difference is packaging format (Tape & Reel versus Tube). However, SN65MLVD202DR carries "Not For New Designs" status, making it unsuitable for new product development.

Q: What is the difference between SN65MLVD202ADR and SN65MLVD205ADR?

A: Both parts are parametric equivalents with identical electrical performance (100 Mbps, 1/1 transceiver, full-duplex LVDS multipoint) and mechanical specifications (14-SOIC package, -40°C to 85°C operating range). The base product numbers differ (202 versus 205), but this distinction does not affect functional compatibility. SN65MLVD205ADR is currently in active production with higher inventory availability.

Q: Are all three parts pin-compatible?

A: Yes. All three parts use the 14-SOIC package with identical pinout, electrical characteristics, and mechanical dimensions (0.154" width, 3.90mm). Pin-level compatibility is guaranteed across all substitute options.

Q: Which part should be selected for high-volume manufacturing?

A: SN65MLVD205ADR is recommended due to active product status, highest inventory level (11694 units), and Tape & Reel packaging optimized for automated assembly processes. SN65MLVD202DR offers Tape & Reel format but carries "Not For New Designs" status.

Q: Are there any compliance or certification differences between these parts?

A: No. All three parts are ROHS3 compliant, REACH unaffected, carry MSL Level 1 (unlimited moisture sensitivity), and share identical ECCN and HTSUS classifications.

Q: Can packaging format be changed during the product lifecycle?

A: Packaging format selection (Tube versus Tape & Reel) is determined by manufacturing and assembly requirements and should be established during design phase. While electrical equivalence permits substitution, packaging format changes may require process validation and assembly line reconfiguration.